Finishing Characteristics of Titanium Alloy Surfaces Using Multi-pole-coupling Rotational Magnetic Field

  • SHI Chen ,
  • TIAN Yebing ,
  • FAN Zenghua ,
  • ZHOU Qiang
Expand
  • School of Mechanical Engineering, Shandong University of Technology, Zibo, Shandong, 255049

Received date: 2019-05-22

  Online published: 2020-07-18

Abstract

Aiming at the finishing requirements of titanium alloy surfaces fabricated by selective laser melting, a multi-pole-coupling rotational magnetic field finishing device was designed to study the finishing characteristics. The ANSYS Maxwell software was employed to analyze the magnetic field intensity distribution of finishing apparatus. A finishing experimental platform was established, and the influences of spindle speed, C-rotary table speed, and machining gap on surface roughness were investigated. The results show that the values of surface roughness decrease from 5.991 μm to 0.793 μm under the machining conditions of spindle speed is as 500 r/min, C-rotary table speed is as 160 r/min, and machining gap is as 0.7 mm. The scanning electron micnoscope(SEM) observation shows that the surfaces deposited layer disappeare after finishing, and the surface quality is greatly improved.

Cite this article

SHI Chen , TIAN Yebing , FAN Zenghua , ZHOU Qiang . Finishing Characteristics of Titanium Alloy Surfaces Using Multi-pole-coupling Rotational Magnetic Field[J]. China Mechanical Engineering, 2020 , 31(12) : 1415 -1420 . DOI: 10.3969/j.issn.1004-132X.2020.12.004

References

[1] GUO W, SUN R J, SONG B W, et al. Laser Shock Peening of Laser Additive Manufactured Ti6Al4V Titanium Alloy[J]. Surface and Coatings Technology, 2018, 349:503-510.
[2] 杨永强,宋长辉,王迪. 激光选区熔化技术及其在个性化医学中的应用[J]. 机械工程学报,2014,50(21):140-151. YANG Yongqiang, SONG Changhui, WANG Di. Laser Selective Melting Technology and Its Application in Personalized Medicine[J]. Journal of Mechanical Engineering, 2014, 50(21):140-151.
[3] ZHU Y Y, LI J, TIAN X J, et al. Microstructure and Mechanical Properties of Hybrid Fabricated Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Titanium Alloy by Laser Additive Manufacturing[J]. Materials Science and Engineering:A, 2014, 607:427-434.
[4] HUANG X, BAI Q, LI Y T, et al. Machining Finish of Titanium Alloy Prepared by Additive Manufacturing[J]. Applied Mechanics and Materials, 2017, 872:43-48.
[5] KUM C W, SATO T, GUO J, et al. A Novel Media Properties-based Material Removal Rate Model for Magnetic Field-assisted Finishing[J]. International Journal of Mechanical Sciences, 2018, 141:189-197.
[6] 肖阳,孙友松,陈光忠. 永磁场磁力研磨TC11钛合金的实验研究[J]. 表面技术,2017(2):236-241. XIAO Yang, SUN Yousong, CHEN Guangzhong. Experimental Study on Magnetic Grinding of TC11 Titanium Alloy by Permanent Magnetic Field[J]. Surface Technology, 2017(2):236-241.
[7] 喻正好,韩冰,陈松,等. 钛合金空间弯管磁粒研磨工艺参数分析[J]. 表面技术,2018,47(4):183-189. YU Zhenghao, HAN Bing, CHEN Song, et al. Analysis of Process Parameters of Magnetic Grain Grinding in Space Alloy of Titanium Alloy[J]. Surface Technology, 2018, 47(4):183-189.
[8] 韩冰,刘立鑫,陈燕. 磁力研磨法加工弯管内表面的工艺参数优化[J]. 中国机械工程,2015,26(6):814-817. HAN Bing, LIU Lixin, CHEN Yan. Optimization of Process Parameters for Machining the Inner Surface of Curved Pipe by Magnetic Abrasive Method[J]. China Mechanical Engineering, 2015, 26(6):814-817.
[9] 焦安源,全洪军,陈燕,等. 超声磁力复合研磨钛合金锥孔的试验研究[J]. 机械工程学报,2017, 53(19):128-133. JIAO Anyuan, QUAN Hongjun, CHEN Yan, et al. Experimental Study on Ultrasonic Magnetic Composite Grinding of Titanium Alloy Taper Hole[J]. Journal of Mechanical Engineering, 2017, 53(19):128-133.
[10] PARAMESWARI G, JAIN V K, RAMKUMAR J, et al. ExperimentalInvestigations into Nanofinishing of Ti6Al4V Flat Disc Using Magnetorheological Finishing Process[J]. The International Journal of Advanced Manufacturing Technology, 2019, 100(5/8):1055-1065.
[11] BARMAN A, DAS M. Design and Fabrication of a Novel Polishing Tool for Finishing Freeform Surfaces in Magnetic Field Assisted Finishing(MFAF) Process[J]. Precision Engineering, 2017, 49:61-68.
[12] FAN Z, TIAN Y, LIU Z, et al. Investigation of aNovel Finishing Tool in Magnetic Field Assisted Finishing for Titanium Alloy Ti-6Al-4V[J]. Journal of Manufacturing Processes, 2019, 43:74-82.
[13] PRESTON F. The Theory and Design of Plate Glass Polishing Machines[J]. Journal of Glass Technology, 1927, 11:214.
Outlines

/

〈 〉