Directional Internal-cooling Tools and Their Machining Performances

  • PENG Ruitao ,
  • JIANG Haojian ,
  • TANG Xinzi ,
  • ZHANG Shan
Expand
  • 1. School of Mechanical Engineering, Xiangtan University, Xiangtan, Hunan, 411105;
    2. AECC Hunan South Astronautics Industry Co., Ltd., Zhuzhou, Hunan, 412002

Received date: 2018-06-20

  Online published: 2020-07-09

Abstract

In view of surface burns in cutting of nickel-based superalloy, the directional internal-cooling cutting methods were proposed to improve the cooling effects of cutting fluid in cutting areas. The flow and temperature field model of the directional internal-cooling tool were established by FLUENT software, and the effects of micro-channel structures on heat transfer ability of the tool were studied. Based on the simulation results, the micro-channel structures were designed, and the directional internal-cooling cutting systems were developed. Cutting experiments of nickel-based superalloy with different cooling methods, i.e. dry, flood cooling and directional internal-cooling, were carried out under same cutting parameters. The influences of cooling methods on cutting force, cutting temperature, surface roughness and surface topography were studied respectively. The results show that the internal-cooling method may effectively reduce the cutting force and cutting temperature. Under directional internal-cooling conditions, lower surface roughness and more favorable surface topography with regular textures are obtained.

Cite this article

PENG Ruitao , JIANG Haojian , TANG Xinzi , ZHANG Shan . Directional Internal-cooling Tools and Their Machining Performances[J]. China Mechanical Engineering, 2019 , 30(21) : 2629 -2635,2642 . DOI: 10.3969/j.issn.1004-132X.2019.21.017

References

[1] 彭锐涛,李仲平,黄晓芳,等. 加压内冷却方法在高温合金磨削中的应用[J]. 中国机械工程,2017,28(16):2008-2015. PENG Ruitao, LI Zhongping, HUANG Xiaofang, et al. Applications of Pressurized Internal Cooling Method in Superalloy Grinding Processes[J]. China Mechanical Engineering, 2017, 28(16):2008-2015.
[2] MOHSAN A U, LIU Z Q, PADHY G K. A Review on the Progress towards Improvement in Surface Integrity of Inconel 718 under High Pressure and Flood Cooling Conditions[J]. International Journal of Advanced Manufacturing Technology, 2017, 91(1/4):107-125.
[3] SHARMA A K, TIWARI A K, DIXIT A R. Effects of Minimum Quantity Lubrication (MQL) in Machining Processes Using Conventional and Nanofluid Based Cutting Fluids:a Comprehensive Review[J]. Journal of Cleaner Production, 2016, 127:1-18.
[4] ITURBE A, HORMAETXE E, GARAY A, et al. Surface Integrity Analysis When Machining Inconel 718 with Conventional and Cryogenic Cooling[J]. Procedia CIRP, 2016, 45:67-70.
[5] WU Z, YANG Y, LUO C. Design, Fabrication and Dry Cutting Performance of Pulsating Heat PipeSelf-cooling Tools[J]. Journal of Cleaner Production, 2016, 124:276-282.
[6] ANTON S, ANDREAS S, FRIEDRICH B. Heat Dissipation in Turning Operations by Means of Internal Cooling[J]. Procedia Engineering, 2015, 100:1116-1123.
[7] FERRI C, MINTON T, CHANI S, et al. Efficiency in Contamination-free Machining Using Microfluidic Structures[J]. CIRP Journal of Manufacturing Science and Technology, 2014, 7(2):97-105.
[8] LI T J, WU T, DING X H, et al. Design of an Internally Cooled Turning Tool Based on Topology Optimization and CFD Simulation[J]. International Journal of Advanced Manufacturing Technology, 2017, 91:1327-1337.
[9] MINTON T, GHANI S, SAMMLER F, et al. Temperature of Internally-cooled Diamond-coated Tools for Dry-cutting Titanium[J]. International Journal of Machine Tools and Manufacture, 2013, 75:27-35.
[10] DINIZ A E, MICARONI R. Influence of the Direction and Flow Rate of the Cutting Fluid on Tool Life in Turning Process of AISI 1045 Steel[J]. International Journal of Machine Tools and Manufacture, 2007, 47:247-254.
[11] COURBON C, KRAMAR D, KRAJNIK P, et al. Investigation of Machining Performance in High-pressure Jet Assisted Turning of Inconel 718:An Experimental Study[J]. International Journal of Machine Tools and Manufacture, 2009, 49:1114-1125.
[12] OBIKAWA T, YAMAGUCHI M. Computational Fluid Dynamic Analysis of Coolant Flow in Turning[J]. Procedia CIRP, 2013, 8:271-275.
[13] BIERMANN D, OEZKAYA E. CFD Simulation for Internal Coolant Channel Design of Tapping Tools to Reduce Tool Wear[J]. CIRP Annals-Manufacturing Technology, 2017, 66:109-112.
[14] HADAD M, SADEGHI B. Minimum Quantity Lubrication-MQL Turning of AISI 4140 Steel Alloy[J]. Journal of Cleaner Production, 2013, 54:332-343.
[15] SHU S R, CHENG K, DING H, et al. An Innovative Method to Measure the Cutting Temperature in Process by Using an Internally Cooled Smart Cutting Tool[J]. Journal of Manufacturing Science & Engineering, 2013, 135(6):061018.
Outlines

/

〈 〉