Fatigue Analysis of Commercial Vehicle Frames Based on Six-dimensional Wheel Loads

  • LIU Jun ,
  • ZHANG Haijian ,
  • WANG Wei ,
  • LIU Yajun ,
  • ZHOU Fugeng
Expand
  • 1. Institute of Automobile and Traffic Engineering, Hefei University of Technology, Hefei, 230009;
    2. Anhui Jianghuai Automotive Co., Ltd., Hefei, 230601

Received date: 2018-06-07

  Online published: 2020-07-09

Abstract

A frame of a commercial vehicle was taken as the research object, and six-dimensional force transducers were fixed on the three axles of the vehicle. Tests were completed at Dingyuan test field with several typical roads to get six-dimensional force. The finite element model of the frame was built by HyperMesh and the stress field of the frame under unit load was obtained by using the inertia release theory. Rigid-flexible coupled multi-body dynamics model of the vehicle was built by ADAMS and the load spectrums of the junctions between frame and suspensions were obtained based on the six-dimensional force signals of the wheel hub. According to the linear cumulative damage theory, combining the stress distribution under unit load of the frame, the load spectrums of the junctions between the frame and the suspensions and the strain(ε)-fatigue life(N) curve of materials of the frame, fatigue simulations of the frame were carried out by nCode and the results show that the reliable life of the frame meets the relevant national safety regulations and the design requirements. The simulation results are also verified by experiments.

Cite this article

LIU Jun , ZHANG Haijian , WANG Wei , LIU Yajun , ZHOU Fugeng . Fatigue Analysis of Commercial Vehicle Frames Based on Six-dimensional Wheel Loads[J]. China Mechanical Engineering, 2019 , 30(21) : 2583 -2589 . DOI: 10.3969/j.issn.1004-132X.2019.21.010

References

[1] 徐灏,疲劳强度[M].北京:高等教育出版社,1988. XU Hao.Fatigue Strength[M].Beijing:Higher Education Press,1998.
[2] 申杰斌,唐东林.一种考虑应力梯度的疲劳寿命预测方法[J].中国机械工程,2017,28(1):40-44. SHEN Jiebin, TANG Donglin. Predicting Method for Fatigue Life with Stress Gradient[J].China Me-chanical Engineering,2017,28(1):40-44.
[3] LI Wenliang, ZHOU Wei, ZHANG Lu, et al. Fatigue Reliability Analysis of Running System of Large Passenger Vehicle Considering Velocity Distribution[C]//Proceedings of 20152nd International Conference on Machinery. Paris, 2015:637-640.
[4] 陈书聪. 汽车零部件可靠性道路模拟检测试验研究[D]. 广州:华南理工大学,2013. CHEN Shucong.A Study of the Reliability of Vehicle Part Tested by Road Simulation Detection[D]. Guangzhou:South China University of Technolo-gy,2013.
[5] 张少辉. 基于虚拟迭代的某商用车驾驶室疲劳寿命分析研究[D]. 合肥:合肥工业大学, 2017. ZHANG Shaohui.The Fatigue Life Analysis of a Commercial Vehicle Cab Based on Virtual Iteration[D]. Hefei:Hefei University of Technology,2017.
[6] 黄元毅,董国红. 基于实测动态道路谱的车辆疲劳性能分析[J]. 汽车工程, 2017, 39(11):1281-1285. HUANG Yuanyi,DONG Guohong.Vehicle Fatigue Performance Design Based on Dynamic Road Load Spectra Measured[J]. Automotive Engineering,2017, 39(11):1281-1285.
[7] 周耀群,张为公,刘广孚.基于新型车轮六分力传感器的汽车道路试验系统设计与研究[J].中国机械工程,2007,18(20):2510-2514. ZHOU Yaoqun,ZHANG Weigong,LIU Guangfu.Research and Development on the Vehicle Roadway Test System Based on a New Six-component Wheel Force Transducer[J]. China Mechanical Engineering,2007,18(20):2510-2514.
[8] 沈磊,张守,元郁强.轮心六分力作用下悬架疲劳载荷谱提取[J].汽车技术,2012(1):48-50. SHEN Lei, ZHANG Shou, YUAN Yuqiang. Extraction of Suspension Forces for Fatigue Analysis Based on 6-axis Wheel Load[J].Automobile Technology, 2012(1):48-50.
[9] LEE Yunli, RICHARD H. Road Test Simulation Technology in Light Vehicle Development and Durability Evaluation[J].SAE Paper, 2005-01-0854.
[10] 周炜, 周鋐, 冯展辉. 应用局部应力-应变法估算机械疲劳寿命[J]. 同济大学学报(自然科学版), 2001, 29(8):928-931. ZHOU Wei, ZHOU Hong. FENG Zhanhui.Use of Local Stress-Strain Method in Fatigue Life Prediction of Grab Bucket Conveyer[J]. Journal of Tongji University(Natural Science Edition), 2001, 29(8):928-931.
[11] 郭小炜.刚柔耦合系统的动力学建模与响应分析[D].重庆:重庆大学,2016. GUO Xiaowei. Dynamic Modeling and Dynamic Response Analysis for the Rigid-flexible Coupling System[D]. Chongqing:Chongqing University,2016.
[12] 欧健,张青林,杨鄂川,等.考虑悬架柔性的刚柔耦合汽车平顺性研究[J].机械设计与制造,2015(2):132-138. OU Jian, ZHANG Qinglin, YANG Echuan, et al. Rigid-flexible Coupling Study on Ride Comfort of Car with Flexible Suspension[J]. Machinery Design & Manufacture,2015(2):132-138.
[13] MINER M A. Cumulative Damage in Fatigue[J]. Journal of Applied Mechanics, 1945(12):159-164.
Outlines

/

〈 〉