Cathode Design and Experimental Study of NC Electrochemical Boring Processes for Stepped Holes

  • XU Bo ,
  • GAN Weimin ,
  • HE Yafeng ,
  • LI Wenjing ,
  • WANG Xiangzhi
Expand
  • 1. School of Aeronautics and Mechanical Engineering, Changzhou Institute of Technology, Changzhou, Jiangsu, 213002;
    2. Key Laboratory of Special Processing of Colleges and Universities of Jiangsu Province, Changzhou, Jiangsu, 213002;
    2. School of Mechanical Engineering, Changzhou University, Changzhou, Jiangsu, 213164

Received date: 2018-08-08

  Online published: 2020-07-09

Abstract

NC electrochemical boring method was adopted to solve the processing problems of stepped inner holes with small inlet,large inner cavity,and large deep diameter ratio.According to the structural characteristics of stepped holes,cathodes with different spiral outlets,different rotating angles,and different taper of shunt blocks were designed.The flow fields were analyzed by FLUENT,and the results show that the cathodes with 24° conical angle,360° rotating angle,and double spiral outlets meet the design requirements.Orthogonal tests were carried out to study the influences of processing parameters on removal amount and processing clearance.Main size of the cathode is determined by the testing results,and the problems of uneven wall thickness of the stepped hole are solved by correcting the tapers of the cathodes.By the proposed method,errors of the stepped hole are small,and quality of processing surfaces is good,which meet the production requirements.

Cite this article

XU Bo , GAN Weimin , HE Yafeng , LI Wenjing , WANG Xiangzhi . Cathode Design and Experimental Study of NC Electrochemical Boring Processes for Stepped Holes[J]. China Mechanical Engineering, 2019 , 30(12) : 1498 -1506 . DOI: 10.3969/j.issn.1004-132X.2019.12.018

References

[1] 袁思波,于振涛,皇甫强,等.钛合金细长孔的钻削工艺研究[J].稀有金属快报,2005,24(12):38-40. YUAN Sibo,YU Zhentao,HUANGPU Qiang,et al.Drilling and Truncating Technique for Slender Hole of Ti Alloy Bar[J].Rare Metals Letters,2005,24(12):38-40.
[2] 任春,陈华,杨常清.批量阶梯孔加工工艺的改进与实践[J].工具技术,2012,46(9):112-116. REN Chun,CHEN Hua,YANG Changqin.Improvement and Practice of Batch Stepped Hole Processing Technology[J].Tool Technology,2012,46(9):112-116.
[3] 刘玉杰,赵建社,干为民,等.轻量化阶梯孔结构电解加工试验研究[J].中国机械工程,2015,26(11):1429-1433. LIU Yujie,ZHAO Jianshe,GAN Weimin,et al.Experimental Research on Electrochemical Machining of Lightweight Stepped Hole Structure[J].China Mechanical Engineering,2015,26(11):1429-1433.
[4] 张京超,田明鑫,徐文骥,等.电解扩孔成形加工装置的设计[J].电加工与模具,2015(4):62-65. ZHANG Jingchao,TIAN Mingxin,XU Wenji,et al.Design of Electrolytic Hole Expanding Forming Machine[J].Electric Machining and Die,2015(4):62-65.
[5] 唐霖.立式刻槽和扩孔电解加工装置设计[J].电加工与模具,2009(2):32-36. TANG Lin.Design of Electrochemical Machining Device for Vertical Grooving and Reaming[J].Electric Machining and Die,2009(2):32-36.
[6] JONES R M,HARVEY S J.Electrolyte History Effects during Machining of Steps in Long Flowpath ECM[C]//Proceedings of the Twenty-first International Machine Tool Design and Research Conference.Swansea,1981:367-371.
[7] DAS A K,SAHA P.Machining of Circular Micro Holes by Electrochemical Micro-machining Process[J].Advances in Manufacturing,2013,1(4):314-319.
[8] 范植坚,杨森,唐霖.电解加工技术的应用和发展[J].西安工业大学学报,2012,32(10):775-784. FAN Zhijian,YANG Sen,TANG Lin.Application and Development of Electrolytic Machining Technology[J].Journal of Xi'an Technological University,2012,32(10):775-784.
[9] 干为民,徐波,褚辉生.数控电解机械复合切割加工间隙研究[J].制造技术与机床,2013(10):41-44 GAN Weimin,XU Bo,CHU Huisheng.Research on Machining Clearance of NC Electrolytic Machinery Compound Cutting[J].Manufacturing Technology and Machine Tool,2013(10):41-44
[10] 徐波,干为民,褚辉生,等.一种储压腔的数控电解车削镗孔加工用阴极:中国,CN201310684778.4[P].2014-04-09. XU Bo,GAN Weimin,CHU Huisheng,et al.A Cathode for CNC Electrolytic Turning and Boring of Pres- sure Storage Cavity:China,CN201310684778.4[P].2014-04-09.
[11] 吴建民,徐家文.数控电解加工整体叶轮阴极三维流场数值模拟[J].中国机械工程,2009,20(7):780-783 WU Jianmin,XU Jiawen.Three-dimensional Numerical Simulation of Flow Field in Cathode of Integral Impeller in NC Electrochemical Machining[J].China Mechanical Engineering,2009,20(7):780-783.
Outlines

/

〈 〉