Profile Division and Programmatic Modeling of Tetrahedral Truss Deployable Antennas

  • HAN Bo ,
  • XU Yundou ,
  • GUO Luyao ,
  • ZHANG Shuo ,
  • YAO Jiantao ,
  • ZHAO Yongsheng
Expand
  • 1. Parallel Robot and Mechatronic System Laboratory of Hebei Province, Yanshan University, Qinhuangdao, Heibei, 066004;
    2. Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of Education, Yanshan University, Qinhuangdao, Heibei, 066004

Received date: 2019-01-25

  Online published: 2020-07-09

Abstract

Tetrahedral truss deployable antennas were studied,and a simple profile division method was proposed.Based on MATLAB and SOLIDWORKS,a programmatic modeling method was proposed. Custom software development for SOLIDWORKS was completed by VBA programming language,and visual operation interfaces were designed.Two examples of deployable antenna mechanisms were used to verify the correctness of the profile division method and the programmatic modeling processes.The proposed profile division method proposed herein is simple and the quality of the profile mesh is good,the method of programmatic modeling is convenient and quick to model the antenna mechanisms,and the overall design efficiency is greatly improved.

Cite this article

HAN Bo , XU Yundou , GUO Luyao , ZHANG Shuo , YAO Jiantao , ZHAO Yongsheng . Profile Division and Programmatic Modeling of Tetrahedral Truss Deployable Antennas[J]. China Mechanical Engineering, 2019 , 30(12) : 1400 -1408 . DOI: 10.3969/j.issn.1004-132X.2019.12.003

References

[1] SANTIAGO-PROWALD J,BAIER H.Advances in Deployable Structures and Surfaces for Large Apertures in Space[J].CEAS Space Journal,2013,5(3/4):89-115.
[2] XU Y D,CHEN L L,LIU W L,et al.Type Synthesis of the Deployable Mechanisms for the Truss Antenna Using the Method of Adding Constraint Chains[J].Journal of Mechanisms and Robotics,2018,10(4):041002.
[3] XU Y,GUAN F L.Structure-electronic Synthesis Design of Deployable Truss Antenna[J].Aerospace Science and Technology,2013,26(1):259-267.
[4] 韩博,许允斗,姚建涛,等.剪叉联动式双层环形桁架可展开天线机构设计与分析[J].载人航天,2017,23(3):306-310. HAN Bo,XU Yundou,YAO Jiantao,et al.Design and Analysis of Scissors Linkage Double Ring Truss Deployable Antenna Mechanism[J].Manned Spaceflight,2017,23(3):306-310.
[5] DAI L,GUAN F L,GUEST J K.Structural Optimization and Model Fabrication of a Double-ring Deployable Antenna Truss[J].Acta Astronautica,2014,94:843-851.
[6] 王娟,刘明治,杨要恩.基于改进变异蚁群算法神经网络的空间大型可展天线动态响应辨识[J].中国机械工程,2009,20(1):86-89. WANG Juan,LIU Mingzhi,YANG Yaoen.Identification of Large-space Deployable Antenna Dynamic Response Based on Improved Mutated Ant Colony Algorithm[J].China Mechanical Engineering,2009,20(1):86-89.
[7] 胡飞,宋燕平,郑士昆,等.空间构架式可展天线研究进展与展望[J].宇航学报,2018,39(2):111-120. HU Fei,SONG Yanping,ZHENG Shikun,et al.Advancesand Trends in Space Truss Deployable Antenna[J].Journal of Astronautics,2018,39(2):111-120.
[8] 郑士昆,冀有志,崔兆云,等.环境一号C星SAR天线设计与分析[J].雷达学报,2014,3(3):266-273. ZHENG Shikun,JI Youzhi,CUI Zhaoyun,et al.Design and Analysis of HJ-1-C Satellite SAR Antenna[J].Journal of Radars,2014,3(3):266-273.
[9] 黄志荣,郑士昆,朱佳龙,等.环境一号C星构架反射器展开驱动部件优化设计[J].雷达学报,2014,3(3):282-287. HUANG Zhirong,ZHENG Shikun,ZHU Jialong,et al. Design Optimization of Expansion Driven Components for the HJ-1-C Satellite[J].Journal of Radars,2014,3(3):282-287.
[10] LI T J.Deployment Analysis and Control of Deployable Space Antenna[J].Aerospace Science and Technology,2012,18(1):42-47.
[11] 尤国强,杨东武.索网结构展开和调控性能的多目标形状优化[J].中国机械工程,2009,20(9):1053-1056. YOU Guoqiang,YANG Dongwu.Multi-objective Optimization on Shape for a Cable-net Structure with Goals of Deployment and Adjustment Ability[J].China Mechanical Engineering,2009,20(9):1053-1056.
[12] AGRAWAL P,ANDERSON M,CARD M.Preliminary Design of Large Reflectors with Flat Racets[J].IEEE Transactions on Antennas and Propagation,1981,29(4):688-694.
[13] 张京街,关富玲,胡其彪.大型切割旋转抛物面展开结构的设计[J].工程设计学报,2000,7(1):46-48. ZHANG Jingjie,GUAN Fuling,HU Qibiao.Design of Large Cutting-palabolic Deployable Structure[J].Journal of Engineering Design,2000,7(1):46-48.
[14] 李团结,周懋花,段宝岩.可展天线的柔性索网结构找形分析方法[J].宇航学报,2008,29(3):794-798. LI Tuanjie,ZHOU Maohua,DUAN Baoyan.A Method of Form-finding Analysis for Flexible Cable Net Structures of Deployable Antennas[J].Journal of Astronautics,2008,29(3):794-798.
[15] YANG D W,ZHANG S X,LI T J,et al.Preliminary Design of Paraboloidal Reflectors with Flat Facets[J].Acta Astronautica,2013,89:14-20.
[16] DENG H Q,LI T J,WANG Z W.Design of Geodesic Cable Net for Space Deployable Mesh Reflectors[J].Acta Astronautica,2016,119:13-21.
[17] 田大可,刘荣强,邓宗全,等.构架式可展天线工作表面母线拟合方法[J].哈尔滨工程大学学报,2010,31(9):1240-1247. TIAN Dake,LIU Rongqiang,DENG Zongquan,et al.Fitting Method of Working Surface Generatrix for Deployable Truss Antennas[J].Journal of Harbin Engineering University,2010,31(9):1240-1247.
[18] 陈雨,毛恩荣,吕黄珍,等.基于推理的大型收获机械变速箱参数化设计[J].农业机械学报,2013,44(增刊2):278-282. CHEN Yu,MAO Enrong,LYU Huangzhen,et al.Parametric Design of Large Harvesting Machinery Transmission Gearbox Based on Reasoning[J].Transactions of the Chinese Society for Agricultural Machinery,2013,44(S2):278-282.
[19] 郭旭伟,王知行,钟诗胜,等.虚拟环境下并联机床的参数化建模与干涉校验[J].计算机集成制造系统,2003,9(6):465-469. GUO Xuwei,WANG Zhixing,ZHONG Shisheng,et al.Parameterized Modeling and Interfere Calibration of Parallel Machine Tool in Virtual Environment[J].Computer Integrated Manufacturing Systems,2003,9(6):465-469.
[20] 俞高红,张玮炜,孙良,等.偏心齿轮-非圆齿轮后插旋转式分插机构的三维参数化设计[J].农业工程学报,2011,27(11):9-14. YU Gaohong,ZHANG Weiwei,SUN Liang,et al.Three-dimensional Parametric Design of Backward Rotary Transplanting Mechanism with Eccentric Gears and Non-circular Gear[J].Transactions of the Chinese Society of Agricultural Engineering,2011,27(11):9-14.
[21] 赵振宙,严畅,王同光,等.考虑叶片相互影响风力机涡流发生器参数化建模[J].机械工程学报,2018,54(2):201-208. ZHAO Zhenzhou,YAN Chang,WANG Tongguang,et al.Parametric Model of Vortex Generators of Wind Turbine Considering Inter-effect of Winglets[J].Journal of Mechanical Engineering,2018,54(2):201-208.
[22] 刘博林,谢里阳,张娜,等.基于Isight的冲压驱动桥壳参数化有限元建模方法[J].东北大学学报(自然科学版),2018,39(3):373-377. LIU Bolin,XIE Liyang,ZHANG Na,et al.Finite Element Modeling of Punching Drive Axle Housing Parameterization Based on Isight[J].Journal of Northeastern University (Natural Science),2018,39(3):373-377.
[23] 葛晓波,邵晓东,仇原鹰,等.一种基于框架模型的产品整机建模规则描述语义[J].计算机集成制造系统,2016,22(1):232-240. GE Xiaobo,SHAO Xiaodong,QIU Yuanying,et al.Descriptive Semantics of Whole Product Modeling Rules Based on Frame Model[J].Computer Integrated Manufacturing Systems,2016,22(1):232-240.
[24] 关富玲,侯国勇,赵孟良.构架式可展天线结构设计的程序实现[J].工程设计学报,2006,13(2):108-113. GUAN Fuling,HOU Guoyong,ZHAO Mengliang.Program Implementation of Structure Design for Deployable Truss Antenna[J].Journal of Engineering Design,2006,13(2):108-113.
[25] 夏鸿建,王波兴,陈立平.多体系统仿真分析平台参数化建模技术研究[J].计算机集成制造系统,2007,13(8):1511-1518. XIA Hongjian,WANG Boxing,CHEN Liping.Parametric Modeling Technique for Multi-body System Simulation Platform[J].Computer Integrated Manufacturing Systems,2007,13(8):1511-1518.
Outlines

/

〈 〉