A simulation method of shift load fluctuation was proposed, and the dynamics characteristics of shift manipulators of driving robot under load fluctuation were analyzed. A power transmission model of shift manipulators including the end load fluctuation model of the manipulators was established. In the carrier motion model, the load was decomposed into selecting direction load and shifting direction load. A neural network gear load model was proposed, and the experimental data were compared to verify the effectiveness of the proposed model. The dynamics characteristics of the shift manipulators under load fluctuations were analyzed. The effects of end load changes on the trajectory tracking of the shift manipulators were verified.
ZHOU Nan
,
CHEN Gang
. Dynamics Analysis of Shift Manipulators Based on Neural Network Load Fluctuation Simulation[J]. China Mechanical Engineering, 2020
, 31(4)
: 472
-481
.
DOI: 10.3969/j.issn.1004-132X.2020.04.015
[1] CHEN G, ZHANG W G. Digital Prototyping Design of Electromagnetic Unmanned Robot Applied to Automotive Test[J]. Robotics and Computer-Integrated Manufacturing, 2015, 32:54-64.
[2] CHEN G, ZHANG W. Hierarchical Coordinated Control Method for Unmanned Robot Applied to Automotive Test[J]. IEEE Transactions on Industrial Electronics, 2015, 63(2):1039-1051.
[3] 陈刚, 张为公, 龚宗洋, 等. 用于汽车驾驶机器人的车辆性能自学习方法[J]. 中国机械工程, 2010, 21(4):491-495. CHEN Gang, ZHANG Weigong, GONG Zongyang, et al. A Vehicle Performance Self Learning Method Applied to Robot Driver[J]. China Mechanical Engineering, 2010, 21(4):491-495.
[4] 汪俊, 陈刚, 王纪伟. 汽车驾驶机器人换挡机械手驱动力仿真优化[J]. 计算机仿真, 2017, 34(5):347-352. WANG Jun, CHEN Gang, WANG Jiwei. Driving Force Simulation and Optimization of Shift Manipulator for Vehicle Robot Driver[J]. Computer Simulation, 2017, 34(5):347-352.
[5] 卢伟, 陈浩, 王玲,等. 拖拉机驾驶机器人换挡机械手运动分析[J]. 农业机械学报, 2016, 47(1):37-44. LU Wei, CHEN Hao, WANG Ling, et al. Motion Analysis of Tractor Robot Driver's Gear Shift Mechanical Arm[J]. Transaction of the Chinese Society for Agricultural Machinery, 2016, 47(1):37-44.
[6] 虞沈林, 陈刚. 驾驶机器人换挡机械手刚柔耦合运动分析[J]. 汽车工程, 2018, 40(6):733-748. YU Shenlin, CHEN Gang. Kinematics Analysis of Rigid-flexible Coupling of Shift Manipulator for Robot Driver[J]. Automotive Engineering, 2018,40(6):733-748.
[7] PATEL H, TENDULKAR V, BAID H, et al. Gearshift Quality Sensitivity Analysis[J]. SAE International Journal of Advances and Current Practices in Mobility, 2019, 1(1):137-142.
[8] 陈玉祥, 臧孟炎, 陈勇, 等. 基于虚拟样机技术的手动变速器换挡力分析[J]. 中国机械工程, 2012,23(8):996-1000. CHEN Yuxiang, ZANG Mengyan, CHEN Yong, et al. Shift Force Analysis of Manual Transmission Based on Virtual Prototyping Technology[J]. China Mechanical Engineering, 2012, 23(8):996-1000.
[9] ÖZPINAR I·, AKALIN O. Gearset Synchronization Modeling of a Heavy Commercial Vehicle Transmission and Correlation with Objective Measurements of Gear Shift Quality[J]. SAE Technical Paper:2019-01-0031, 2019.
[10] 张志刚, 余晓霞, 郑燕杰, 等. 同步器摩擦特性建模仿真与试验[J]. 中国机械工程, 2019, 30(7):825-831. ZHANG Zhigang, YU Xiaoxia, ZHENG Yanjie, et al. Modeling Simulation and Tests of Friction Characteristics for Synchronizers[J]. China Mechanical Engineering, 2019, 30(7):825-831.
[11] YANG C, HUA L, WANG Z, et al. Shift Performance Test and Analysis of Multipurpose Vehicle[J]. Advances in Mechanical Engineering, 2014, 6:378176.
[12] 张志刚, 李尚, 苏洪, 等. 变速器换挡二次冲击强度频次分析[J]. 科学技术与工程, 2016, 16(20):280-285. ZHANG Zhigang, Li Shang, SU Hong, et al. Frequency Analysis on Double Bump Strength of Automobile Transmission[J]. Science Technology and Engineering, 2016, 16(20):280-285.
[13] 国家汽车标准化技术委员会. 汽车机械式变速器总成台架试验方法(第一部分:微型):QC/T 568.1-2011[S]. 北京:中国计划出版社,2011. National Automotive Standardization Technical Committee. Rig Testing Method for Auto Manual Transmission Assembly. Part 1:Mini-vehicle:QC/T 568.1-2011[S]. Beijing:China Planning Press, 2011