Analysis of Micro Texture and Friction Properties of Friction Coupling Surfaces Produced by AS-EMM

  • TONG Wenjun ,
  • WANG Minghuan ,
  • QIU Guozhi ,
  • XU Xuefeng
Expand
  • School of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, 310000

Received date: 2019-04-23

  Online published: 2020-06-23

Abstract

An AS-EMM method was presented to process the micro-structures with different array shapes on planes and cylindrical metal surfaces. Comparisons were carried out between AS-EMM and EMM by analyzing the machining accuracy, surface quality and friction properties of the micro-texture. The results show that the eroded dimple aspect ratios of planes and cylinder pairs are increased by 45.6% and 25.8% respectively which may improve the dissolution localization and the machining precision by AS-EMM. Besides, the friction-wear test results express the 13.6% and 16.2% reduction respectively in average coefficient of friction values on different pairs by AS-EMM.

Cite this article

TONG Wenjun , WANG Minghuan , QIU Guozhi , XU Xuefeng . Analysis of Micro Texture and Friction Properties of Friction Coupling Surfaces Produced by AS-EMM[J]. China Mechanical Engineering, 2020 , 31(11) : 1331 -1336 . DOI: 10.3969/j.issn.1004-132X.2020.11.009

References

[1] 王旭峰. 气膜屏蔽微细电解加工去除机理及工艺研究[D].杭州:浙江工业大学,2017. WANG Xufeng. Removal Mechanism and Technical Study for Air-shielding Electrochemical Micro Machining[D]. Hangzhou:Zhejiang University of Technology, 2017.
[2] CHO C H, HONG S S, CHONG N C. Micropatterning on Cylindrical Surfaces via Electrochemical Etching Using Laser Masking[J]. Applied Surface Science, 2014, 301(19):442-450.
[3] 李小海, 王振龙, 赵万生. 微细电化学加工研究新进展[J]. 电加工与模具, 2004(2):1-5. LI Xiaohai, WANG Zhenlong, ZHAO Wansheng. New Progress in Micro-electrochemical Machining[J]. Electromachining&Mould, 2004(2):1-5.
[4] 苗嘉智, 郭智威, 袁成清. 内燃机缸套-活塞环微织构设计与研究进展[J]. 润滑与密封, 2017, 42(2):124-131. MIAO Jiazhi, GUO Zhiwei, YUAN Chengqing. Research Progress on Micro-texture of Cylinder Liner-piston Ring in Internal Combustion Engine[J]. Lubrication Engineering, 2017, 42(2):124-131.
[5] RYK G, ETSION I. Testing Piston Rings with Partial Laser Surface Texturing for Friction Reduction[J]. Wear, 2006(261):792-796.
[6] 刘红彬, 牛荣军, 薛玉君,等. 表面纹理对径向滑动轴承油膜承载能力的影响[J]. 润滑与密封, 2010, 35(7):18-22. LIU Hongbin, NIU Rongjun, XUE Yujun, et al. The Effect of Surface Textures on Loading Capacity of Journal Bearing Lubricating Film[J]. Lubrication Engineering, 2010, 35(7):18-22.
[7] WANG X, GIOVANNINI M, XING Y, et al. Fabrication and Rribological Behaviors of Corner-cube-like Dimple Arrays Produced by Laser Surface Texturing on Medical Needles[J]. Tribology International, 2015, 92:553-558.
[8] DENKENA B, KASTNER J, WANG B. Advanced Microstructures and Its Production through Cutting and Grinding[J]. CIRP Annals-Manufacturing Technology, 2010, 59(1):67-72.
[9] ZHANG C, BIJAY K S. Investigation on Drag Reduction Performance of Aero Engine Blade with Micro-texture[J]. Aerospace Science & Technology, 2018(72):380-396.
[10] BUI Q T, RO S K, PARK J K. A Static Model for Micro-pattern Forming Prediction in Rolling-based Surface Texturing[J]. International Journal of Advanced Manufacturing Technology, 2017, 92(5/8):2819-2829.
[11] AHUIR-TORRES J I, ARENAS M A, PERRIE W, et al. Surface Texturing of Aluminium Alloy AA2024-T3 by Picosecond Laser:Effect on Wettability and Corrosion Properties[J]. Surface & Coatings Technology, 2017,321:279-291.
[12] YAMADA H, TAURA H, KANEKO S. Numerical and Experimntal Analyses of the Dynamic Characteristics of Journal Bearings with Square Dimples[J]. Journal of Tribology, 2018, 140:011703-1-13.
[13] WANG X, KATO K, ADACHI K, et al. Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water[J]. Tribology International, 2003, 36(3):189-197.
[14] 邱燕飞, 王成勇, 宋月贤,等. 微磨料空气射流加工玻璃微流道结构研究[J]. 金刚石与磨料磨具工程, 2009(3):32-37. QIU Yanfei, WANG Chengyong, SONG Yuexian, et al. Micro Channels Machined on Glass by Micro Abrasive Jet Machining[J]. Diamond Abrasives Engineering, 2009(3):32-37.
[15] 杨敏, 李寒松, 王国乾,等. MA956高温合金活动模板电解加工小孔技术研究[J]. 电加工与模具, 2016(5):42-46. YANG Min, LI Hansong, WANG Guoqian, et al. Study on Small Hole Machining of MA956 Superalloys by Electrochem Ical Machining with Movable Cathode Mask[J]. Electromachining Mould, 2016(5):42-46.
[16] CHEN X, QU N, LI H, et al. Electrochemical Micromachining of Micro-dimple Arrays Using a Polydimethylsiloxane (PDMS) Mask[J]. Journal of Materials Processing Tech.:2016, 229:102-110.
[17] MITCHELL-SMITH J, SPEIDEL A, GASKELL J, et al. Energy Distribution Modulation by Mechanical Design for Electrochemical Jet Processing Techniques[J]. International Journal of Machine Tools & Manufacture, 2017,122:32-46.
[18] NATSU W, IKEDA T, KUNIEDA M. Generating Complicated Surface with Electrolyte Jet Machining[J]. Precision Engineering, 2007, 31(1):33-39.
[19] 王明环, 王旭峰, 鲍兆彦,等. 气膜屏蔽微细电解加工方法研究[J]. 机械科学与技术, 2017, 36(12):1891-1895. WANG Minghuan, WANG Xufeng, BAO Zhao-yan, et al. Investigating Air-shielding Electrochemical Micro Machining[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(12):1891-1895.
[20] WANG M H, BAO Z Y, QIU G Z. Fabrication of Micro-dimple Arrays by AS-EMM and EMM[J]. International Journal of Advanced Manufacturing Technology, 2017, 93(1/4):787-797.
Outlines

/

〈 〉