Surface Quality of Aramid Fiber Composites with Ultra-low Temperature and Micro-milling

  • SHI Wentian ,
  • HAN Dong ,
  • LIU Yude ,
  • HOU Yanjun
Expand
  • School of Materials Science and Mechanical Engineering, Beijing Technology and Business University, Beijing, 100048

Received date: 2018-11-19

  Online published: 2020-02-03

Abstract

The micro-milling comparison machining tests were carried out under normal temperature and liquid nitrogen ultra-low temperature environments for aramid fiber composites, the machining surface quality and milling force data were obtained under different parameters and environments. The results show that the ultra-low temperature milling environments may modify the processing materials, reduce the strength, toughness and other properties, making it easy to cut, reducing the occurrence of wire drawing defects, fiber chip breaking thoroughly, and helping to obtain a more excellent surface topography. The ultra-low temperature environment suppresses the generation of ablation defects completely, improves the surface quality of the machined surfaces, and the surface roughness of milled surfaces may reach 2 μm or less. Compared with the normal temperature environments, ultra-low temperature processing may maintain a good milling surface quality at a high feed rate, and may improve the processing efficiency to a certain extent while ensuring the processing quality. The milling forces drop significantly and the tool surface wear is less. The ultra-low temperature processing environments improve the milling performance of the aramid fiber composites and improve the milling surface quality.

Cite this article

SHI Wentian , HAN Dong , LIU Yude , HOU Yanjun . Surface Quality of Aramid Fiber Composites with Ultra-low Temperature and Micro-milling[J]. China Mechanical Engineering, 2019 , 30(9) : 1056 -1064 . DOI: 10.3969/j.issn.1004-132X.2019.09.007

References

[1] AZMI A I, LIN R J T, BHATTACHARYYA D,et al. Machinability Study of Glass Fibre-reinforced Polymer Composites during End Milling[J]. The International Journal of Advanced Manufacting Technology, 2013,64(1/4):247-261.
[2] 石文天,刘玉德,张永安,等.芳纶纤维复合材料切削加工研究进展[J].表面技术,2016,45(1):28-35. SHI Wentian, LIU Yude, ZHANG Yong'an, et al. Research Progress on the Cutting Process of Aramid Fiber Composites[J]. Surface Technology, 2016,45(1):28-35.
[3] 林有希, 禹杰, 林华. 碳纤维/树脂基复合材料高速铣削的刀具磨损机理[J]. 中国表面工程, 2016, 29(5):138-145. LIN Youxi, YU Jie, LIN Hua. Wear Mechanism of Tool in High-speed Milling of Carbon/Epoxy Composite[J]. China Surface Engineering, 2016, 29(5):138-145.
[4] SHIROBOKOV A, KLOCKE F, BAER O, et al. Finite Element Modelling of Cutting Force in Shearing of Multidirectional Carbon Fibre Reinforced Plastic Laminates[J]. Journal of Composite Materials, 2018, 52(28):3865-3874.
[5] IC Y T, ELALDI F, KECECI B. Topsis Based Taguchi Optimization of Machining Characteristics in End Milling Operation of Kevlarepoxy Composites[J]. Welding Research, 2016,37(6):653-662.
[6] WOOD D, APPLEBY-THOMAS G, HAMEED A, et al. The Variance on the Shock Response of a Carbon Fibre Composite due to the Orientation of the Weave[J]. Journal of Materials Science, 2018,53(16):11415-11425.
[7] 万铖,金平,王鹏.纤维增强复合材料低速冲击损伤模型的建立及验证[J].装备环境工程,2015,12(2):39-43. WAN Cheng, JIN Ping, WANG Peng. Establishment and Verification of FRP Damage Model under Low-velocity Impact[J]. Equipment Environmental Engineering, 2015,12(2):39-43.
[8] 张艳,郭芳,张招柱.自润滑纤维织物复合材料摩擦学性能研究[J].表面技术,2017,46(8):140-144. ZHANG Yan, GUO Fang, ZHANG Zhaozhu. Tribological Properties of Self-lubricating Fabric Composites[J]. Surface Technology, 2017,46(8):140-144.
[9] 李锋,李涌泉,李文科,等.碳纤维/树脂基复合材料铣削表面粗糙度及表面形貌研究[J].表面技术,2017,46(9):264-269. LI Feng, LI Yongquan, LI Wenke, et al. Surface Roughness and Surface Morphology of Milled Carbon/Epoxy Composite Surface[J]. Surface Technology, 2017,46(9):264-269.
[10] GU D, DUAN C, FAN B, et al. Tribological Properties of Hybrid PTFE/Kevlar Fabric Composite in Vacuum[J]. Tribology International,2016,103:423-431.
[11] AL-SULAIMAN F, YILBAS B, KARAKAS F, et al. Laser Hole Cutting in Kevlar:Modeling and Quality Assessment[J]. The International Journal of Advanced Manufacturing Technology, 2008,38(11):1125-1136.
[12] EL-TAWEEL T, ABDEL-MAABOUD A, AZZAM B, et al. Parametric Studies on the CO2 Laser Cutting of Kevlar-49 Composite[J]. The International Journal of Advanced Manufacturing Technology, 2009,40(9/10):907-917.
[13] 王含妮,谭勇,张喜和.芳纶纤维复合材料在脉冲激光下的热损伤研究[J]. 光电技术应用, 2015,30(1):26-31. WANG Hanni, TAN Yong, ZHANG Xihe. Research on Thermal Damage of Aramid Fiber Composites Acted by Pulse Laser[J]. Electro-optic Technology Application,2015,30(1):26-31.
[14] AZMI A, LIN R, BHATTACHARYYA D.Tool Wear Prediction Models during End Milling of Glass Fibre-reinforced Polymer Composites[J]. The International Journal of Advanced Manufacturing Technology, 2013,67(1/4):701-718.
[15] WANG F, WANG X, YANG R, et al. Research on the Carbon Fibre-reinforced Plastic (CFRP) Cutting Mechanism Using Macroscopic and Microscopic Numerical Simulations[J]. Journal of Reinforced Plastics and Composites, 2016,36(8):555-562.
[16] 张高峰, 何杨, 鲁炎鑫,等. 碳纤维增强复合材料低温冷风磨削试验研究[J]. 中国机械工程, 2016, 27(20):2779-2784. ZHANG Gaofeng, HE Yang, LU Yanxin, et al. Experimental Study on Cryogenic Cold Air Grinding of Carbon Fibre Reinforced Plastics[J]. China Mechanical Engineering, 2016, 27(20):2779-2784.
[17] HE Y, QING H, ZHANG S, et al. The Cutting Force and Defect Analysis in Milling of Carbon Fiber-reinforced Polymer (CFRP) Composite[J]. The International Journal of Advanced Manufacturing Technology, 2017,93(2):1-14.
[18] 刘新,武湛君,何辉永,等.单向碳纤维增强树脂基复合材料的超低温力学性能[J].复合材料学报,2017,34(11):2437-22445. LIU Xin, WU Zhanjun, HE Huiyong, et al. Cryogenic Mechanical Properties of Unidirectional Carborn Fiber Reinforced Epoxy Composite[J]. Acta Materiae Compositae Sinica, 2017, 34(11):2437-2445.
[19] GOMEZ-DELRIO T, BARBERO E, ZAERA R, et al. Dynamic Tensile Behaviour at Low Temperature of CFRP Using a Split Hopkinson Pressure Bar[J]. Composites Science and Technology, 2005, 65(1):61-71.
Outlines

/

〈 〉