Research Advances in Evaluation and Prediction Method of Thermal Fatigue Life for Hot-working Dies

  • SU Nan ,
  • CHEN Minghe
Expand
  • College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016

Received date: 2018-03-07

  Online published: 2019-10-09

Abstract

Due to the cyclic changes of temperature and mechanical loading during hot-working processes, the deformations and failure mechanism of hot-working dies were complex, so the thermal fatigue life of hot-working dies was difficult to be evaluated and predicted in the applications of dies. Combined with the existing research results,the methods for evaluating and predicting the thermal fatigue life of hot-working dies were introduced 动者 in the studies of thermal stress fatigue. The thermal-mechancial fatigue life of hot-working dies was studied from two perspectives of phenomenological life model and damage cumulative model respectively. And the development trends of thermal fatigue life prediction for hot-working dies were prospected.

Cite this article

SU Nan , CHEN Minghe . Research Advances in Evaluation and Prediction Method of Thermal Fatigue Life for Hot-working Dies[J]. China Mechanical Engineering, 2019 , 30(11) : 1378 -1385 . DOI: 10.3969/j.issn.1004-132X.2019.11.016

References

[1] 吴晓春,左鹏鹏. 国内外热作模具钢发展现状与趋势[J]. 模具工业, 2013(10):1-9. WU Xiaochun, ZUO Pengpeng. Development Status and Trend of Hot Working Die Steels at Home and Abroad[J]. Die & Mould Industry, 2013(10):1-9.
[2] JHAVAR S, PAUL C P, JAIN N K. Causes of Failure and Repairing Options for Dies and Molds:a Review[J]. Engineering Failure Analysis, 2013, 34:519-535.
[3] SPERA D A, MOWBRAY D F. Thermal Fatigue of Materials and Components[M].Philadelphia:ASTM, 1976:15-26.
[4] COFFIN L F. A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal[J]. Transactions of National Research Institute for Metals, 1954, 76:931-950.
[5] MANSON S S. Behavior of Materials under Conditions of Thermal Stress[J]. National Advisory Committee for Aeronautics,1954, 7(S3/4):661-665.
[6] 左鹏鹏,吴晓春,曾艳,等.基于应变控制的4Cr5MoSiV1热作模具钢热机械疲劳行为[J].工程科学学报,2018,40(1):76-83. ZUO Pengpeng, WU Xiaochun, ZENG Yan, et al. Strain-controlled Thermal-mechanical Fatigue Behavior of 4Cr5MoSiV1 Hot Work Die Steel[J]. Chinese Journal of Engineering,2018,40(1):76-83.
[7] BOAS W, HONEYCOMBE R W K. The Anisotropy of Thermal Expansion as a Cause of Deformation in Metals and Alloys[J]. Proceedings of the Royal Society of London, 1947, 188(1015):427-439.
[8] SKUMAVC A, TUŠEK J, NAGODE A, et al. Thermal Fatigue Study of Tungsten Alloy WNi28Fe15 Cladded on AISI H13 Hot Work Tool Steel[J]. Surface and Coatings Technology, 2016, 285:304-311.
[9] BIROL Y. Response to Thermal Cycling of Duplex-coated Hot Work Tool Steels at Elevated Temperatures[J]. Materials Science and Engineering:A, 2011, 528(29):8402-8409.
[10] 张学友,左鹏鹏,何西娟,等. 氮含量对热作模具钢4Cr5Mo2V热疲劳性能的影响[J]. 金属热处理, 2017,42(1):9-14. ZHANG Xueyou, ZUO Pengpeng, HE Xijuan, et al. Effect of Nitrogen Content on Thermal Fatigue Property of Hot Work Die Steel 4Cr5Mo2V[J]. Heat Treatment of Metals, 2017,42(1):9-14.
[11] 李新城, 吴文峰, 孙庆普. 基于偏最小二乘的热作模具钢热疲劳性能预测研究[J]. 机械强度, 2010, 32(5):134-138. LI Xincheng, WU Wenfeng, SUN Qingpu. "Study of Hot-working Steels" Thermal-fatigue Property Prediction Based on PLS[J]. Journal of Mechanical Strength, 2010,32(5):134-138.
[12] MELLOULI D, HADDAR N, KÖSTER A, et al. Hardness Effect on Thermal Fatigue Damage of Hot-working Tool Steel[J]. Engineering Failure Analysis, 2014, 45:85-95.
[13] 郭冰峰,樊永军,刘宪东,等. 25Cr12Ni5Mo钢热疲劳损伤特性研究[J]. 材料热处理学报, 2007(S1):49-52. GUO Bingfeng, FAN Yongjun, LIU Xiandong, et al. Study on Thermal Fatigue Damage Characteristics of 25Cr12Ni5Mo Steel[J]. Transactions of Materials and Heat Treatment, 2007(S1):49-52.
[14] 吴晓春,许珞萍. Uddeholm热疲劳图谱的分析与定量评定[J]. 理化检验(物理分册), 2002, 38(1):14-17. WU Xiaochun, XU Luoping.Quantitative Analysis and Evaluation of the Uddeholm Heat-checking Scale[J]. Physical Testing and Chemical Analysis (Part A:Physical Testing), 2002,38(1):14-17.
[15] 谢豪杰, 吴晓春. 热作模具钢热疲劳损伤程度的计算机评定[J]. 上海金属, 2008, 30(3):55-58. XIE Haojie, WU Xiaochun. Computer Evaluation for the Degree of Thermal Fatigue Damage of Hot Working Die Steel[J]. Shanghai Metals,2008,30(3):55-58.
[16] PARIS P, ERDOGAN F. A Critical Analysis of Crack Propagation Laws[J]. Transactions of the ASME, 1963, 85(4):528-533.
[17] 周路海. 热冲压成型用模具钢SDCM的组织与性能研究[D]. 上海:上海大学, 2015. ZHOU Luhai. Study on Microstructure and Properties of SDCM Hot Stamping Tool Steels[D].Shanghai:Shanghai University, 2015.
[18] LEFEBVRE D, ELLYIN F. Cyclic Response and Inelastic Strain Energy in Low Cycle Fatigue[J]. International Journal of Fatigue, 1984, 6(1):9-15.
[19] COFFIN L F. The Multi-stage Nature of Fatigue:a Review[J]. Metal Science, 1977, 11(2):68-72.
[20] 施占华,汤继跃,李熙章,等. 用应变能法研究模具钢的热疲劳性能[J]. 安徽工学院学报, 1988,7(2):32-39. SHI Zhanhua, TANG Jiyue, LI Xizhang, et al.Strain Energy Damage Model and Its Application to Tool Steel[J]. Journal of Anhui Institute of Technology, 1988,7(2):32-39.
[21] OSTERGREN W J. Correlation of Hold Time Effects in Elevated Temperature Low Cycle Fatigue Using a Frequency Modified Damage Function[C]//The ASME-MPC Symposium on Creep-fatigue Interaction. New York:ASME, 1976:179-202.
[22] PAN X, LI X, CHANG L, et al. Thermal-mechanical Fatigue Behavior and Lifetime Prediction of P92 Steel with Different Phase Angles[J]. International Journal of Fatigue, 2018, 109:126-136.
[23] TAIRA S,MOTOAKI F, TAKASHI H. A Method for Life Prediction of Thermal Fatiogue by Isothermal Fatigue Testing[C]//Symp. Mech. Behav. Mater.:Soc. Mater. Sci.. Kyoto, 1974:257-264.
[24] HALFORD G R, NACHTIGALL A J. Strainrange Partitioning Behavior of an Advance Gas Turbine Disk Alloy AF2-1DA[J]. Journal of Aircraft, 1980, 17(8):598-604.
[25] 何晋瑞,段作祥,宁有连,等. 应变能区分法及其对GH33A与1Cr18Ni9Ti的应用[J]. 金属学报, 1985,21(1):54-63. HE Jinrui, DUAN Zuoxiang, NING Youlian, et al. Strain Energy Partitioning and Its Application to GH33A Ni-base Super-alloy and 1Cr18Ni9Ti Stainless Steel[J]. Acta Metallurgica Sinica, 1985,21(1):54-63.
[26] 董照钦, 段作祥, 何晋瑞. 应变能-频率分离法及其应用[J]. 航空学报, 1985, 6(5):461-466. DONG Zhaoqin, DUAN Zuoxiang, HE Jinrui. A Strain Energy-frequency Separation Method and Its Application[J]. Acta Aeronautica et Astronautica Sinca, 1985, 6(5):461-466.
[27] 胡绪腾, 宋迎东. 应用总应变-应变能区分法预测热机械疲劳寿命[J]. 燃气涡轮试验与研究, 2012,25(1):14-16. HU Xuteng, SONG Yingdong. Life Prediction for Thermomechanical Fatigue Using Total Strain Version of Strain Energy Partitioning[J]. Gas Turbine Experiment and Research, 2011,25(1):14-16.
[28] 纪冬梅,轩福贞,涂善东,等. P91钢的蠕变-疲劳交互作用研究现状[J]. 压力容器, 2011, 28(6):37-43. JI Dongmei, XUAN Fuzhen, TU Shandong, et al.Summary of Research on Creep-fatigue Interaction of P91 Steel[J]. Pressure Vessel Technology, 2011,28(6):37-43.
[29] 陈凌,张贤明,欧阳平. 一种疲劳-蠕变交互作用寿命预测模型及试验验证[J]. 中国机械工程, 2015, 26(10):1356-1361. CHEN Ling, ZHANG Xianming, OUYANG Ping. A Model of Life Prediction for Fatigue-creep Interaction and Its Experimental Verification[J]. China Mechanical Engineering, 2015, 26(10):1356-1361.
[30] 施惠基,牛莉莎,王中光. 高温合金材料循环相关热机械疲劳寿命预测[J]. 固体力学学报, 1998,19(1):89-93. SHI Huiji, NIU Lisha, WANG Zhongguang. Lifetime Prediction of Cyclic Dependent Thermomechanical Fatigue on High Temperature Alloys[J]. Acta Mechanica Solida Sinica, 1998,19(1):89-93.
[31] CHABOCHE J L, LESNE P M. A Non-linear Continuous Fatigue Damage Model[J]. Fatigue & Fracture of Engineering Materials & Structures, 1988, 11(1):1-17.
[32] LEMAITRE J, DESMORAT R. Engineering Damage Mechanics[M]. Berlin:Springer, 2005.
[33] WANG W, BUHL P, KLENK A, et al. A Continuum Damage Mechanics-based Viscoplastic Model of Adapted Complexity for High Temperature Creep-fatigue Loading[J]. Journal of Engineering for Gas Turbines & Power, 2016, 138(9):092501.
[34] SOMMITSCH C, SIEVERT R, WLANIS T, et al. Modelling of Creep-fatigue in Containers during Aluminium and Copper Extrusion[J]. Computational Materials Science, 2007, 39(1):55-64.
[35] 方建儒. 热作模具钢微观组织对热机械疲劳行为的影响[D]. 长春:吉林大学, 2002. FANG Jianru. Effect of Microstructure on Thermomechanical Fatigue Behavior of Hot Work Die Steel[D]. Changchun:Jilin University, 2002.
[36] CUI L, WANG P. Two Lifetime Estimation Models for Steam Turbine Components under Thermomechanical Creep-fatigue Loading[J]. International Journal of Fatigue, 2014, 59(SC):129-136.
[37] 段兴旺,刘建生,郑晓华,等. 316LN钢裂纹萌生的临界损伤值[J]. 塑性工程学报, 2013, 20(3):60-64. DUAN Xingwang, LIU Jiansheng, ZHENG Xiaohua, et al. Critical Damage Value of 316LN Steel Crack Initiation[J]. Journal of Plasticity Engineering, 2013,20(3):60-64.
[38] 李爽,陈士浩,何西娟,等. 两种热作模具钢高温耐磨性对比研究[J]. 摩擦学学报, 2017, 37(1):59-67. LI Shuang, CHEN Shihao, HE Xijuan, et al.A Comparison of Wear Resistance of Two Types Hot-work Die Steels at High Temperature[J].Tribology, 2017,37(1):59-67.
[39] 唐睿,胡成亮,赵震. 一种考虑侧接触切向滑动的微凸体弹塑性变形传热模型[J]. 上海交通大学学报, 2017, 51(5):520-525. TANG Rui, HU Chengliang, ZHAO Zhen. An Elastic-plastic Heat Transfer Model of Two Asperities Contact under Consideration of Shoulder-shoulder Contact and Tangential Sliding[J]. Journal of Shanghai Jiao Tong University, 2017,51(5):520-525.
[40] 周路海,张洪波,黎军顽,等. H13热作模具钢感应加热循环过程的数值模拟[J]. 材料热处理学报, 2016, 37(2):227-234. ZHOU Luhai, ZHANG Hongbo, LI Junwan, et al. Numerical Simulation on Induction Heating Cycle Process of H13 Hot-work Die Steel[J]. Transactions of Materials and Heat Treatment, 2016,37(2):227-234.
Outlines

/

〈 〉