A Novel Guide-type Nozzle for Oil-air Lubrications

  • LIU Muyuan ,
  • GUO Feng ,
  • JIAO Yihang ,
  • PENG Shuling ,
  • WANG Xi
Expand
  • 1. School of Mechanical Engineering, Qingdao University of Technology, Qingdao, Shandong, 266520;
    2. Yantai Huashun Machinery & Engineering Equipment Co., Ltd., Yantai, Shandong, 264670

Received date: 2017-04-07

  Online published: 2018-06-10

Abstract

A novel guide-type nozzle was designed herein,and some tests were carried out to study air parameters, jet flow properties,droplet sizes and droplet distributions. Comparisons were completed for this new nozzle and classical nozzles. Results show that the guide-type nozzle presents higher oil supply efficiency than that of the classical needle nozzle. For qualified lubrication performances,the new nozzle reduces lubricant supply by 40% and suppresses pressurized air consumption by 28%, which leads to direct energy and cost saving.

Cite this article

LIU Muyuan , GUO Feng , JIAO Yihang , PENG Shuling , WANG Xi . A Novel Guide-type Nozzle for Oil-air Lubrications[J]. China Mechanical Engineering, 2018 , 29(11) : 1284 -1288 . DOI: 10.3969/j.issn.1004-132X.2018.11.005

References

[1] 杨和中,刘厚飞. TURBOLUB油气润滑技术(五)[J].润滑与密封, 2003(5):92-95. YANG Zhonghe, LIU Houfei. TURBOLUB Oil-air Lubrication Technology (5)[J]. Lubrication Engineering, 2003(5):92-95.
[2] 何宇征.油气润滑应用于滚动轴承的发展现状[J].哈尔滨轴承, 2011, 32(2):72-73. HE Yuzheng. Current Situation of Oil-gas Lubrication Applied in Rolling Bearing[J]. Journal of Harbin Bearing, 2011, 32(2):72-73.
[3] MOON J H, LEE H D,KIM S I. Lubrication Characteristics Analysis of an Air-oil Lubrication System Using an Experimental Design Method[J]. International Journal of Precision Engineering&Manufacturing,2013, 14(2):289-297.
[4] 蒋天合,张保.油气润滑应用在高速轴承中的实验研究[J].机械制造与自动化, 2008, 37(4):29-32. JIANG Tianhe, ZHANG Bao. Experimental Research on Oil-air Lubrication for High Speed Ball Bearing[J]. Machine Building&Automation, 2008, 37(4):29-32.
[5] 王建文,巩彬彬,刘俊,等.滚动轴承油气润滑性能的试验研究[J].华东理工大学学报(自然科学版), 2007, 33(3):436-440. WANG Jianwen, GONG Binbin, LIU Jun, et al. Behavior of Oil-air Lubrication Using in Roller Bearing System[J]. Journal of East China University of Science and Technology (Natural Science Edition), 2007, 33(3):436-440.
[6] WU C H,KUNG Y T. A Parametric Study on Oil/Air Lubrication of a High-speed Spindle[J]. Precision Engineering, 2005, 29:162-167.
[7] 巩彬彬,张俊国,王建文,等.油气润滑滚动轴承试验装置的研制[J].机械科学与技术, 2007, 26(2):181-183. GONG Binbin, ZHANG Junguo, WANG Jianwen, et al. Research and Development of an Experimental Device for a Rolling Bearing Lubricated with Oil and Air[J]. Mechanical Science and Technology,2007,26(2):181-183.
[8] LACEY SE J, KEMBLE A, ITOH N. Performance Characteristics of Fixed Preload Large Bore Angular Contact Ball Bearings for Machine Tools[J]. Motion&Control, NSK, 1997(2):36-42.
[9] JIANG S,MAO H. Investigation of the High Speed Rolling Bearing Temperature Rise with Oil-air Lubrication[J]. Journal of Tribology, 2011, 133(2):655-664.
[10] 张友平.气液润滑喷嘴的CAE分析研究[D].武汉:武汉理工大学,2007. ZHANG Youping. CAE Analysis of Oil-air Nozzle[D]. Wuhan:Wuhan University of Technology, 2007.
[11] AKAMATSU Y, MORI M. Minimizing Lubricant Supply in an Air-oil Lubrication System[J]. NTN Technical Review, 2004, 72:12-19.
[12] 刘牧原,方志敏,栗心明,等.滚动轴承油气润滑性能测试系统[J].工程与试验, 2015, 55(3):77-80. LIU Muyuan, FANG Zhimin, LI Xinmin, et al. Testing System for Oil-air Lubricating Property of Rolling Bearing[J]. Engineering&Test, 2015, 55(3):77-80.
Outlines

/

〈 〉