Model-based Multi-scale Thermal Safety Design of Traction Battery Systems

  • CHEN Tianyu ,
  • FENG Xuning ,
  • OUYANG Minggao ,
  • LU Languang
Expand
  • 1. State Key Laboratory of Automotive Safety and Energy, Tsinghua University, Beijing, 100084;
    2. Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, 100084

Received date: 2018-01-18

  Online published: 2018-08-10

Abstract

Aiming at the thermal safety problems of lithium-ion traction battery systems,from the viewpoints of battery material modification,battery cell design and battery system design,a model based thermal safety design and development method for battery systems was proposed. The test methods of thermal stability of battery materials,thermal runaway characteristics of battery cells and thermal runaway propagation of battery systems were summarized. Based on the measured parameters of battery thermal safety characteristics,the model of chemical reaction kinetics for thermal runaway of batteries, the model for predicting temperature and pressure of thermal runaway of cells,and the model for thermal runaway propagation of battery packs were set up. The factors needed to be considered in these models were listed. Using the model for simulation analysis,the main factors affecting the thermal safety of the battery systems were obtained and the design of multi-scale thermal safety was guided.

Cite this article

CHEN Tianyu , FENG Xuning , OUYANG Minggao , LU Languang . Model-based Multi-scale Thermal Safety Design of Traction Battery Systems[J]. China Mechanical Engineering, 2018 , 29(15) : 1840 -1846,1874 . DOI: 10.3969/j.issn.1004-132X.2018.15.011

References

[1] 何向明,冯旭宁,欧阳明高.车用锂离子动力电池系统的安全性[J].科技导报, 2016, 34(6):32-38. HE Xiangming,FENG Xuning,OUYANG Minggao.On the Safety Issues of Lithium Ion Battery[J]. Science&Technology Review,2016, 34(6):32-38.
[2] FENG X,OUYANG M,LIU X,et al. Thermal Runaway Mechanism of Lithium Ion Battery for Electric Vehicles:a Review[J]. Energy Storage Materials,2017, 10:246-267.
[3] ABADA S,MARLAIR G,LECOCQ A,et al. Safety Focused Modeling of Lithium-ion Batteries:a Review[J]. Journal of Power Sources,2016,305(2):178-192.
[4] SPOTNITZ R,FRANKLIN J. Abuse Behavior of High-power,Lithium-ion Cells[J]. Journal of Power Sources,2003,113(1):81-100.
[5] BIENSAN P,SIMON B,PÉRÈS J P,et al. On Safety of Lithium-ion Cells[J]. Journal of Power Sources,1999,s 81/82(99):906-912.
[6] FENG X,FANG M,HE X,et al. Thermal Runaway Features of Large Format Prismatic Lithium Ion Battery Using Extended Volume Accelerating Rate Calorimetry[J]. Journal of Power Sources, 2014,255(6):294-301.
[7] GOLUBKOV A W,SCHEIKL S,PLANTEU R, et al. Thermal Runaway of Commercial 18650 Li ion Batteries with LFP and NCA Cathodes-Impact of State of Charge and Overcharge[J]. Rsc Advances,2015,5(70):57171-57186.
[8] FENG X,SUN J,OUYANG M,et al. Characterization of Penetration Induced Thermal Runaway Propagation Process within a Large Format Lithium Ion Battery Module[J]. Journal of Power Sources, 2015,275(2):261-273.
[9] LAMB J,ORENDORFF C J,STEELE L A M,et al. Failure Propagation in Multi-cell Lithium Ion Batteries[J]. Journal of Power Sources,2015,283(6):517-523.
[10] 胡棋威.锂离子电池热失控传播特性及阻断技术研究[D].武汉:中国舰船研究院,2015. HU Qiwei. Study on Lithium-ion Batteries Thermal Runaway Propagation Characteristics and Blocking Techniques[D]. Wuhan:China Ship Research and Development Academy, 2015.
[11] FINEGAN D P,TJADEN B,HEENAN T M M, et al. Tracking Internal Temperature and Structural Dynamics during Nail Penetration of Lithium ion Cells[J]. Journal of the Electrochemical Society,2017,164(13):A3285-A3291.
[12] FENG X,HE X,OUYANG M,et al. Thermal Runaway Propagation Model for Designing a Safer Battery Pack with 25 Ah LiNixCoyMnzO2, Large Format Lithium Ion Battery[J]. Applied Energy, 2015,154(2):74-91.
[13] FENG X,LU L,OUYANG M,et al. A 3D Thermal Runaway Propagation Model for a Large Format Lithium Ion Battery Module[J]. Energy, 2016,115(1):194-208.
[14] KIM G H, PESARAN A, SPOTNITZ R. A Three-dimensional Thermal Abuse Model for Lithium-ion Cells[J].Journal of Power Sources,2007, 170(2):476-489.
[15] ZAVALIS T G,BEHM M,LINDBERGH G. Investigation of Short-circuit Scenarios in a Lithiumion Battery Cell[J]. Journal of the Electrochemical Society,2012,159(6):A848-A859.
[16] FU L J,LIU H,LI C,et al. Surface Modifications of Electrode Materials for Lithium Ion Batteries[J]. Cheminform,2006,8(2):113-128.
[17] MAUGER A,JULIEN C. Surface Modifications of Electrode Materials for Lithium-ion Batteries:Status and Trends[J]. Ionics, 2014, 20(6):751-787.
[18] 平平.锂离子电池热失控与火灾危险性分析及高安全性电池体系研究[D].合肥:中国科学技术大学, 2014.PING Ping. Lithium Ion Battery Thermal Runaway and Fire Risk Analysis and the Development on the Safer Battery System[D]. Hefei:University of Science and Technology of China, 2014.
[19] 夏兰,李素丽,艾新平,等.锂离子电池的安全性技术[J].化学进展,2011, 23(2/3):328-335. XIA Lan,LI Suli,AI Xinping,et al. Safety Enhancing Methods for Li-ion Batteries[J]. Progress In Chemistry,2011, 23(2/3):328-335.
[20] 艾新平,曹余良,杨汉西.锂离子电池自激发安全保护机制[J].电化学,2010, 16(1):6-10. AI Xinping,CAO Yuliang,YANG Hanxi. Self activating Safety Mechanisms for Li-ion Batteries[J]. Electrochemistry,2010, 16(1):6-10.
Outlines

/

〈 〉