Motorhomes steering knuckles had big dimensions and complicated structures. The split manufacturing technology currently used possessed the problems of low material utilization,low production efficiency,and poor product performance. So an integral die forging was proposed,and the optimization of the processes and the development of special facilities for the bending processes were focused on. With adopting classical plastic forming theory,finite element numerical simulations and physical tests, the stress-strain states,metal flows and damage distributions of the bending processes were analyzed. The results of the processing tests show that the proposed program is reasonable and that the integral die forging may be used instead of split manufacturing.The material utilization rate is increased from 45% to more than 70%,and the production efficiency is improved by 4 to 5 times.
ZHANG Yunjun
,
CHEN Tianfu
,
YANG Jie
,
HUANG Mingwei
,
XIA Juchen
,
DENG Lei
,
JIN Junsong
. Development on Key Technologies and Facilities of Integral Die Forging for Motorhomes Steering Knuckles[J]. China Mechanical Engineering, 2018
, 29(17)
: 2125
-2130
.
DOI: 10.3969/j.issn.1004-132X.2018.17.016
[1] 张如华,韩向银,赵一平,等.明晰汽车转向节锻件结构类型的初步建议[J].锻压技术, 2008, 33(5):5-9. ZHANG Ruhua,HAN Xiangyin,ZHAO Yiping,et al. Primary Suggestion for Defining Forging Structure Types of Steering Knuckle[J]. Forging and Stamping Technology,2008,33(5):5-9.
[2] 倪红.重卡转向节挤锻成形工艺研究[J].兵器材料科学与工程, 2015, 38(4):45-48. NI Hong. Extrusion-forging Process of Steering Knuckle on Heavy Truck[J]. Ordnance Material Science and Engineering,2015,38(4):45-48.
[3] 栾伟,孙燕,骆俊廷,等. 42CrMo钢的本构关系与转向节臂成形工艺研究[J].塑性工程学报, 2016, 23(5):173-178. LUAN Wei,SUN Yan,LUO Junting,et al. Constitutive Relationship of 42CrMo Steel and Forming Technology of Steering Knuckle arm[J]. Journal of Plasticity Engineering,2016,23(5):173-178.
[4] 姜效峰,曹怀礼,杜卫东.一种新型的重卡转向节模锻工艺开发[J].重庆理工大学学报(自然科学), 2017, 31(2):34-38. JIANG Xiaofeng,CAO Huaili,DU Weidong. Development of a New Forging Process of Steering Knuckle[J]. Journal of Chongqing University of Technology (Natural Science),2017, 31(2):34-38.
[5] 赵宁,张运军,陈天赋,等. V5型转向节臂部锻造开裂研究[J].塑性工程学报, 2017, 24(3):6-12. ZHAO Ning,ZHANG Yunjun,CHEN Tianfu,et al. Arm Forging Crack of V5 Type Steering Knuckle[J]. Journal of Plasticity Engineering,2017,24(3):6-12.
[6] 夏巨谌,张启勋.材料成形工艺[M].北京:机械工业出版社, 2015. XIA Juchen,ZHNG Qixun. Material Forming Process[M]. Beijing:Mechanical Industry Press,2015.
[7] 肖祥芷.中国模具工程大典第四卷冲压模具设计[M].北京:电子工业出版社, 2007. XIAO Xiangzhi. China Die and Mould Engineering Manual,Volume Ⅳ,Stamping Die Design[M]. Beijing:Publishing House of Electronics Industry, 2007.
[8] 董湘怀.材料成形计算机模拟[M]. 2版.北京:机械工业出版社, 2006. DONG Xianghuai.Material Forming Computer Simulation[M]. 2nd ed. Beijing:Mechanical Industry Press,2006.
[9] BOCHNIAK W,KORBEL A,SZYNDLER R,et al. New Forging Method of Bevel Gears From Structural Steel[J]. Journal of Materials Processing Technology,2006,173:75-83.
[10] 张驰,陈元芳,杨长辉.闭塞锻造的发展概况及其应用[J].锻压技术, 2004, 29(3):7-10. ZHANG Chi,CHEN Yuanfang,YANG Changhui. Development Situation and Application of Closed die Forging in Domestic and Abroad[J]. Forging and Stamping Technology,2004,29(3):7-10.
[11] 夏巨谌,王新云.闭式模锻[M].北京:机械工业出版社, 2013. XIA Juchen,WANG Xinyun. Closed Die Forging[M]. Beijing:Mechanical Industry Press,2013.