The form errors of the face gear tooth surfaces were taken as the research object,the mathematical model of face gear tooth surfaces was established, and the error measurements of face gear tooth surfaces were conducted by CMM. In order to improve the accuracy of face gear tooth surfaces and enhance the application values of theory and engineering,an error assessment method of face gear tooth surfaces was proposed based on SQP. With the identification equation of the tooth surface errors was established,the processing parameters of the machine tools were optimized by using SQP algorithm. And compared with the least squares optimization method,the modified machine tool adjustment parameters were applied,the modified tooth surface errors were detected by CMM again,which verified the feasibility of the method.
MING Xingzu
,
FANG Shuguang
,
WANG Hongyang
. Tooth Surface Form Error Correction for Face Gear Grinding[J]. China Mechanical Engineering, 2018
, 29(17)
: 2031
-2037
.
DOI: 10.3969/j.issn.1004-132X.2018.17.003
[1] 何国旗,严宏志,胡威,等.面齿轮啮合过程中齿面接触分析[J].中南大学学报(自然科学版),2013, 44(1):95-100. HE Guoqi,YAN Hongzhi,HU Wei, et al. Tooth Contact Analysis of Face Gear Meshing[J]. Journal of Central South University (Science and Techndogy),2013,44(1):95-100.
[2] SIMON V. Computer Simulation of Tooth Contact Analysis of Mismatched Spiral Bevel Gears[J]. Mechanism&Machine Theory,2007,42(3):365381.
[3] LITVIN F L,GONZALEZ-PEREZ I,FUENTES A,et al. Design and Investigation of Gear Drives with Non-circular Gears Applied for Speed Variation and Generation of Functions[J]. Computer Methods in Applied Mechanics&Engineering, 2008,197(45):3783-3802.
[4] LIN C Y,TSAY C B,FONG Z H.Computer-aided Manufacturing of Spiralbevel and Hypoid Gears with Minimum Surface-deviation[J]. Mechanism and Machine Theory, 1998, 33(6):785-803
[5] 李丽霞,李培军,刘新状.机床调整误差对弧齿锥齿轮大轮齿面形状影响规律的研究[J].机械传动, 2006,30(4):13-15. LI Lixia,LI Peijun,LIU Xinzhuang. Research on the Influence of the Gear Tooth Surface Shape of Spiral Bevel Gear by Adjustment Error of Machine Tool[J]. Journal of Mechanical Transmission, 2006,30(4):13-15.
[6] 王小椿,王军,姜虹,等.螺旋锥齿轮的齿面测量及机床加工参数修正[J].机械工程学报, 2003, 39(8):125-128. WANG Xiaochun,WANG Jun,JIANG Hong,et al. Tooth Surface Measurement and Machine-settings Correction of Spiral Bevel Gear[J]. Chinese Journal of Mechanical Engineering,2003,39(8):125-128.
[7] 王军.基于三坐标测量的弧齿锥齿轮及准双曲面齿轮齿面加工精度控制方法研究[D].西安:西安交通大学,2003. WANG Jun. A Study on the Tooth Surface Geometrical Precision Control of Spiral Bevel and Hypoid Gears Based on 3-D Coordinate Measuring[D]. Xi'an:Xi'an Jiaotong University, 2003.
[8] 苏进展,方宗德,谷建功.螺旋锥齿轮齿面误差修正[J].农业机械学报,2010,41(3):200-203. SU Jinzhan,FANG Zongde,GU Jiangong. Tooth Surface Correction for Spiral Bevel Gears[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(3):200-203.
[9] 陈书涵,严宏志.基于刀倾法的螺旋锥齿轮齿面误差修正算法研究[J].中国机械工程,2011, 22(9):1080-1084. CHEN Shuhan,YAN Hongzhi. Research on Tooth Surface Deviation Correction Algorithm of Spiral Bevel Gear Based on Tilting Method[J].China Mechanical Engineering,2011, 22(9):1080-1084.
[10] STADTFELD H J. CONIFACE Face Gear Cutting and Grinding[J].Gear Solutions, 2010(9):3847.
[11] 王延忠,钟扬,侯良威,等.航空面齿轮磨削碟形砂轮修整方法及误差分析[J].航空动力学报,2017, 32(1):120-129. WANG Yanzhong,ZHONG Yang,HOU Liangwei,et al. Dressing Method and Dressing Error Analysis of Aviation Face Gear Grinding Wheel[J]. Journal of Aerospace Power,2017,32(1):120-129.
[12] LITVIN F L,CHEN Y J,HEATH G F,et al. Apparatus and Method for Precision Grinding Face Gear:US,6146253[P]. 2000-11-14.
[13] 李晓贞,赵庆斌,朱如鹏.圆柱齿轮修形的面齿轮传动系统动态特性[J].中南大学学报(自然科学版),2015(9):3231-3237. LI Xiaozhen,ZHAO Qingbin,ZHU Rupeng. Dynamics Characteristics of Face Gear Drive System for Modifying Pinion[J]. Journal of Central South University (Science and Technology),2015(9):3231-3237.
[14] 王延忠,王庆颖,吴灿辉,等.正交面齿轮齿面偏差的坐标测量[J].机械传动, 2010, 34(7):1-4. WANG Yanzhong, WANG Qingying, WU Canhui, et al. Deviation of Face Gear Real Tooth Surface Determined by Coordinate Measurements[J]. Journal of Mechanical Transmission, 2010, 34(7):1-4.
[15] 何改云,刘佩佩,王凯.基于序列二次规划算法的圆柱度误差评定方法[J].机械科学与技术,2014, 33(12):1845-1849. HE Gaiyun,LIU Peipei,WANG Kai. Evaluation of the Cylindricity Error Based on the Sequential Quadratic Programming Algorithm[J]. Mechanical Science and Technology for Aerospace Engineering,2014,33(12):1845-1849.