A Ti-22Al-25Nb alloy with dense microstructure was prepared by using SPS method from pre-alloy powders. The densification of the powders during the SPS processes was simulated numerically by using the finite element software MSC. Marc. The effects of sintering temperature,holding time and sintering pressure on the densification processes of the Ti-22Al-25Nb powders were analyzed, respectively. The evolutions of relative density varying with sintering temperature,holding time and sintering pressure were revealed,respectively. Based on the results of simulation,the temperature range of 950~1 200℃,50 MPa pressure and 10~20 min holding time were utilized in a series of sintering experiments to fabricate the Ti-22Al-25Nb alloys. The effects of temperature on the relative density,microstructure evolution and mechanics property of Ti-22Al-25Nb alloy at 50 MPa/10 min were systematically revealed. In addition,the fracture mechanism of the alloys sintered at different temperatures was revealed,respectively. The results show that the alloys sintered at 950℃/50 MPa/10 min exhibit a better mechanics property with the elongation of 8.14% and the yield stress of 691.04 MPa.
JIA Jianbo
,
LIU Wenchao
,
LIU Hailiang
,
LU Chao
,
XU Yan
,
YANG Yue
,
LUO Junting
. Numerical Simulation and Experimental Study on SPS Processes for a Powder Metallurgy Ti-22Al-25Nb Alloy[J]. China Mechanical Engineering, 2018
, 29(19)
: 2377
-2383
.
DOI: 10.3969/j.issn.1004-132X.2018.19.017
[1] BANERJEE D,GOGIA A K,NANDI T K,et al.A New Ordered Orthorhombic Phase in a Ti3AlNb Alloy[J]. Acta Metallurgica,1988,36(4):871882.
[2] 曾汉民.高技术新材料要览[M].北京:中国科学技术出版社,1993:119. ZENG Hanmin. High-tech New Materials[M]. Beijing:China Science and Technology Press, 1993:119.
[3] 张建伟,李世琼,梁晓波,等. Ti32AlNb基合金的研究与应用[J].中国有色金属学报,2010,20(10):336-341. ZHANG Jianwei,LI Shiqiong,LIANG Xiaobo,et al. Studies and Applications of Ti32AlNb based Alloys[J]. Chinese Journal of Nonferrous Metals,2010,20(10):336-341.
[4] HAGIWARA M,EMURA S,ARAOKA A,et al. The Effect of Lamellar Morphology on Tensile and High-cycle Fatigue Behavior of Orthorhombic Ti 22Al-27Nb Alloy[J]. Metallurgical&Materials Transactions A,2004,35(7):2161-2170.
[5] HAGIWARA M,EMURA S,AROKA A,et al. Enhanced Mechanical Properties of Orthorhombic Ti2AlNb-based Intermetallic Alloy[J]. Metals&Materials International,2003,9(3):265-272.
[6] 王艳辉,成晓哲,臧建兵.金刚石、碳化硅复合热传导材料的发展[J].燕山大学学报, 2015,39(5):390402. WANG Yanhui,ChENG Xiaozhe,ZANG Jianbing. Development of Diamond and SiC Composited Heat Sink Materials[J]. Journal of Yanshan University, 2015,39(5):390-402.
[7] 李洪波,韩金成,顾勇飞,等. T10钢表面HVOF喷涂WC-10Co-4Cr涂层的耐磨性研究[J].燕山大学学报,2016,40(1):22-28. LI Hongbo,HAN Jincheng,GU Yongfei,et al. Abrasive Resistance of WC-10Co-4Cr Coating on Deposited T10 Steel Surface by HVOF[J]. Journal of Yanshan University,2016,40(1):22-28.
[8] 李洪波,王依敬,顾勇飞,等.H13钢表面喷涂Cr3C2NiCr和Ni60A涂层的结合强度及耐磨性研究[J].燕山大学学报,2017,41(6):496-502. LI Hongbo,WANG Yijing,GU Yongfei,et al. Bonding Strength and Wear Resistance of Cr3C2 NiCr and Ni60A Thermal Spray Coatings on H13 Steel Surface[J]. Journal of Yanshan University, 2017,41(6):496-502.
[9] 骆俊廷,刘永康,申江龙,等.放电等离子烧结工艺对不导电材料整体电阻的影响[J].中国机械工程, 2015,26(18):2524-2527. LUO Junting,LIU Yongkang,SHEN Jianglong,et al. Influences of Spark Plasma Sintering Process on Overall Resistance of Non-conductive Materials[J]. China Mechanical Engineering,2015,26(18):2524-2527.
[10] 王葛,王兴华,王海舰,等. Fe73.5Cu1Nb3Si13.5B9非晶合金粉体的SPS烧结特性研究[J].燕山大学学报, 2014,38(6):491-496. WANG Ge,WANG Xinghua,WANG Haijian,et al. Research on Sintering Characteristics of Fe73.5Cu1Nb3Si13.5B9 Amorphous Alloys Prepared by Spark Plasma Sintering[J]. Journal of Yanshan University,2014,38(6):491-496.
[11] 王海涛,陈宏超,王鹏,等.放电等离子烧结制备高强度奥氏体不锈钢[J].燕山大学学报,2013,37(1):34-38. WANG Haitao,CHEN Hongchao,WANG Peng, et al. High Strength Austenitic Stainless Steel Prepared by Spark Plasma Sintering[J]. Journal of Yanshan University,2013,37(1):34-38.
[12] SIM K,WANG G,JU J,et al. Microstructure and Mechanical Properties of a Ti-22Al-25Nb Alloy Fabricated from Elemental Powders by Mechanical Alloying and Spark Plasma Sintering[J]. Journal of Alloys&Compounds,2017,704:425-433.
[13] ZHANG K,WANG Y,JIA J,et al. Deformation Properties and Bending/Diffusion Bonding Processing of a P/M Ti-22Al-25Nb Alloy at Elevated Temperature[J]. Procedia Engineering,2014,81:2153-2158.