Single point incremental forming technology was introduced into the metal corrugated tubes forming processes, and a single point incremental forming processes of metal corrugated tubes was presented.Finite element model of single point incremental forming of metal corrugated tubes was estab-lished based on ABAQUS/Explicit. Analysis results show that the evolution of forming forces, forming stresses, local deformation displacements, and plastic strain distributions in the forming processes.An ex-perimental platform for single point incremental forming was set up.These data of the forming processes were collected, and the experimental data were analyzed.The results show that this component in X direc-tion forces in the incremental forming force of the tube wall is the largest, followed by Y direction and Z direction.There is a large plastic strain in inclined wall areas and the circular-arc surfaces, which has easi-ly leads to the thickness thinning and cracking of tube walls.
SHI Xun
,
LI Yan
,
YANG Mingshun
,
YAO Zimeng
,
HOU Xiaoli
. Study on Single Point Incremental Forming Processes of Corrugated Tubes[J]. China Mechanical Engineering, 2018
, 29(20)
: 2507
-2514
.
DOI: 10.3969/j.issn.1004-132X.2018.20.018
[1] 詹梅, 石丰, 邓强等.铝合金波纹管无芯模缩径旋压成形机理与规律[J]. 塑性工程学报, 2014, 21(2):108-115. ZHAN Mei, SHI Feng, DENG Qiang, et al.Forming Mechanism and Rules of Mandreless Neck-spinning on Corrugated Pipes[J]. Journal of Plasticity Engi-neering, 2014, 21(2):108-115.
[2] BELYAEV A K, ZINOVIEVA T V, SMIRNOV K K. Theoretical and Experimental Studies of the Stress-strain State of Expansion Bellows as Elastic Shells[J]. St. Petersburg Polytechnical University Journal:Physics and Mathematics, 2017, 3(1):7-14.
[3] BEHERAA A K, de SOUSAB R A, INGABAO G, et al. Single Point Incremental Forming:an Assess-ment of the Progress and Technology Trends from 2005 to 2015[J]. Journal of Manufacturing Process-es, 2017, 27:37-62.
[4] LI P,HE J,LIU Q,et al. Evaluation of Forming Forces in Ultrasonic Incremental Sheet Metal Form-ing[J].Aerospace Science & Technology, 2017, 63:132-139.
[5] TERAMAE T, MANABE K, UENO K, et al.Effect of Material Properties on Deformation Behavior in Incremental Tube-burring Process Using a Bar Tool[J]. Journal of Materials Processing Technology, 2007, 191(1):24-29.
[6] YANG C, WEN T, LIU L T, et al. Dieless Incre-mental Hole-flanging of Thin-walled Tube for Pro-ducing Branched Tubing[J]. Journal of Materials Processing Technology, 2014, 214(11):2461-2467.
[7] RAUJOL-VEILLÉ J, TOUSSAINT F, TABOU-ROT L, et al.Experimental and Numerical Investiga-tion of a Short, Thin-walled Steel Tube Incremental Forming Process[J]. Journal of Manufacturing Pro-cesses, 2015, 19:59-66.
[8] ALVES M L, ALMEIDA B P P, ROSA P A R, et al.End Forming of Thin-walled Tubes[J].Journal of Materials Processing Technology, 2006, 177(1/3):183-187.
[9] 程秀全, 冯万林, 夏琴香.非轴对称管件缩径旋压的数值模拟与参数优化的研究[J]. 塑性工程学报, 2008, 15(4):61-66. CHENG Xiuquan,FENG Wanlin,XIA Qinxiang. The Study on the Numerical Simulation of Non-axi-symmetric Tube Neck-spinning and Process Param-eters Optimization[J].Journal of Plasticity Engineer-ing, 2008, 15(4):61-66.
[10] WEN T, YANG C, ZHANG S, et al.Characteriza-tion of Deformation Behavior of Thin-walled Tubes during Incremental Forming:a Study with Selected Examples[J].The International Journal of Advanced Manufacturing Technology,2015,78(9):1769-1780.
[11] BECKER C, TEKKAYA A E, KLEINER M.Fun-damentals of the Incremental Tube Forming Pro-cess[J].CIRP Annals-Manufacturing Technology, 2014, 63(1):253-256.
[12] MOHEBBI M S, AKBARZADEB A.Experimental Study and FEM Analysis of Redundant Strains in Flow Forming of Tubes[J]. Journal of Materials Processing Tech., 2010, 210(2):389-395.
[13] KUWABARA T.Advances in Experiments on Met-al Sheets and Tubes in Support of Constitutive Modeling and Forming Simulations[J].Internation-al Journal of Plasticity, 2007, 23(3):385-419.
[14] MOHEBBI M S, AKBARZADEH A.A Novel Spin-bonding Process for Manufacturing Multilayered Clad Tubes[J]. Journal of Materials Processing Technology, 2010, 210(3):510-517.