[1]葛世荣.智能化采煤装备的关键技术[J]. 煤炭科学技术,2014,42(9):7-11.
GE Shirong. Key Technology of Intelligent Coal Mining Equipment[J]. Coal Science and Technology, 2014,42(9):7-11.
[2]史建.露天潜孔钻机钻孔自动定位研究[D].长沙:中南大学,2014.
SHI Jian. Research on Automatic Drilling Positioning of Down-the-hole Drilling Rig[D]. Changsha:Central South University,2014.
[3]ROBINSON J P, KINGMAN S W, SNAPE C E.Scale-up and Design of a Continuous Microwave Treatment System for the Processing of Oil-contaminated Drill Cuttings[J].Chemical Engineer in Research and Design,2010,88:146-154.
[4]MEIER H, LAURISCHKAT R, BERTSCH C, et al. Prediction of Path Deviation in Robot Based Incremental Sheet Metal Forming by Means of an Intergrated Finite Element Multi Body System Model[J]. Key Enginnering Material,2009, 410/411:365-
372.
[5]蔡自兴,谢斌.机器人学[M].北京:清华大学出版社,2015.
CAI Zixing, XIE Bin. Robotics[M].Beijing:Tsinghua University Press, 2015.
[6]MEIER H, BUFF B, LAURISCHKAT R, et al. Increasing the Part Accuracy in Dieless Robot Based Incremental Sheet Metal Forming[J]. CIRP Annals:Manufacturing Technology, 2009,58:233-238.
[7]戴建生.机构学与机器人学的几何基础与旋量代数[M].北京:高等教育出版社,2014.
DAI Jiansheng. Geometrical Foundations and Screw Algebra for Mechanisms and Robotics[M]. Beijing:Higher Education Press, 2014.
[8]SELIG J M. 机器人学的几何基础[M].杨向东,译.北京:清华大学出版社,2014.
SELIG J M. Geometrical Fundamentals of Robotics[M]. YANG Xiangdong, trans. Beijing:Tsinghua University Press, 2014.
[9]斯庞,哈钦森,维德雅瑟格. 机器人建模与控制[M]. 贾振中,译.北京:机械工业出版社,2016.
SPONG M W, HUTCHINSON S, VIDYASAGAR M. Robot Modeling and Control[M]. JIA Zhenzhong, trans. Beijing:China Machine Press, 2016.
[10]NIKU S B. 机器人学导论——分析、控制及应用[M]. 2版.孙富春,朱纪洪,刘国栋,译.北京:电子工业出版社,2018.
NIKU S B. Introduction to Robotics:Analysis, Control, Applications[M]. 2nd ed. SUN Fuchun, ZHU Jihong, LIU Guodong, trans. Beijing:Electronic Industry Press, 2018.
[11]JAZAR R N. 应用机器人学:运动学、动力学与控制技术[M]. 周高峰,译.北京:机械工业出版社,2013.
JAZAR R N. Theory of Applied Robotics:Kinematics, Dynamics and Control[M]. ZHOU Gaofeng, trans. Beijing:China Machine Press, 2013.
[12]黄康,何春生,甄圣超,等.基于区间分析的机器人绝对定位精度分析方法[J].中国机械工程,2016, 27(11):1467-1473.
HUANG Kang, HE Chunsheng, ZHEN Shengchao, et al. An Absolute Positioning Accuracy Analysis Method for Robot Based on Interval Analysis[J]. China Mechanical Engineering, 2016, 27(11):1467-1473.
[13]KUCUK S, BINGUL Z. The Inverse Kinematics Solutions of Fundamental Robot Manipulators with Offset Wrist[C]∥Proceedings of the 2005 IEEE International Conference on Mechatronics. Piscataway, 2005:197-202.
[14]BINGUL Z, ERTUNC H M, OYSU C. Comparison of Inverse Kinematics Solutions Using Neural Network for 6R Robot Manipulator with Offset[C]∥Proceedings of the 2005 ICSC Congress on Computational Intelligence Methods and Applications.
Piscataway, 2005:251-255.
[15]刘志忠,柳洪义,罗忠,等. 基于偏置补偿的6自由度腕部偏置机器人逆解算法[J].东北大学学报(自然科学版),2012,33(6):870-871.
LIU Zhizhong, LIU Hongyi, LUO Zhong, et al. Inverse Kinematics Algorithm for 6-DOF Robots with Offset Wrist Based on Offset Compensation[J].Journal of Northeastern University(Natural Science), 2012, 33(6):870-871.
[16]卜王辉,刘振宇,谭建荣.基于切断点自由度解耦的手腕偏置型6R机器人位置反解[J].机械工程学报,2010,46(21):1-5.
BU Wanghui, LIU Zhenyu, TAN Jianrong. Inverse Displacement Analysis of 6R Robots with Offset Wrists Based on Decoupling Degrees of Freedom at the Cutoff Points[J]. Journal of Mechanical Engineering, 2010,46(21):1-5.
[17]陈平,刘国海.基于RBF神经网络的MOTOMAN-UPJ型机器人运动学逆解[J].机床与液压,2006(12):72-74.
CHEN Ping, LIU Guohai. A Method for Solving Inverse Kinematics of MOTOMAN-UPJ Manipulator Based on RBF Network[J]. Machine Tool & Hydraulics, 2006(12):72-74.
[18]黄开启,魏文彬,陈荣华,等.凿岩机器人钻臂定位误差补偿控制交叉精英反向粒子群优化算法[J].机械科学与技术,2018,37(7):1005-1007.
HUANG Kaiqi, WEI Wenbin, CHEN Ronghua, et al. CEOPSO Algorithm for Positioning Error Compensation Control of Rock Drilling Robotic Drilling Arm[J].Mechanical Science and Technology for Aerospace Engineering,2018,37(7):1005-1007.