For 304L stainless steel plate with the thickness of 6 mm used in the welding of stainless steel pool of nuclear power plant, the comprehensive evaluation of the double tungsten argon arc hybrid welding joint is carried out. The tensile properties, impact properties, bending properties, hardness, structure, ferrite content, intergranular corrosion resistance and coarse-grained grain size rating are tested and comprehensively analyzed. The results show that the comprehensive properties of the welded joint are good when the nuclear grade 304L stainless steel is welded with the double tungsten argon arc hybrid welding. Although the dual heat source process increases the heat, the structure is made of austenite and a small amount of ferrite, and the ferrite content is in the range of 5%−12%. At the same time, no obvious coarsening phenomenon is found in the coarse-grained zone of the welded joint, and the joint has certain hot cracking resistance and good plasticity toughness. No sensitization is found in the intergranular corrosion test, and this welded joint has excellent corrosion resistance. To sum up, the comprehensive performance of the double tungsten argon arc hybrid welding joint of the stainless steel pool used in the nuclear power plant is reliable.
CHENG Xiaohua
,
LI Xiaoyu
. Structure and properties of the double tungsten argon arc hybrid welding joint of stainless steel used in nuclear power plant[J]. Transactions of The China Welding Institution, 2022
, 43(7)
: 108
-112
.
DOI: 10.12073/j.hjxb.20220409002
[1] 郝晓虎. TC4钛合金/304不锈钢薄板钨极氩弧焊接头组织及性能研究[D]. 大连: 大连理工大学, 2020.
Hao Xiaohu. Microstructure and mechanical properties of TC4 titanium alloy/304 stainless steel sheets gas tungsten arc welded joint[D]. Dalian: Dalian University of Technology, 2020.
[2] 王树保, 张海宽, 冷雪松, 等. 双钨极氩弧焊工艺及焊缝成形机理分析[J]. 焊接学报, 2007, 28(2): 21 ? 24
Wang Shubao, Zhang Haikuan, Leng Xuesong, et al. Twin-electrode TIG welding procedure and mechanism of weld formation[J]. Transactions of the China Welding Institution, 2007, 28(2): 21 ? 24
[3] 吴统立, 王克鸿, 孔见, 等. 不锈钢高频复合双钨极氩弧焊接工艺方法[J]. 焊接学报, 2018, 39(10): 20 ? 24
Wu Tongli, Wang Kehong, Kong Jian, et al. High frequency hybrid twin-electrode TIG welding process for stainless steel[J]. Transactions of the China Welding Institution, 2018, 39(10): 20 ? 24
[4] Kobayashi K, Nishimura Y, Iijima T, et al. Practical application of high efficiency twin-arc TIG welding method(sedar-TIG) for pclng storage tank[J]. Welding in the World, 2004, 48: 35 ? 39.
[5] 王新鑫, 樊丁, 黄健康, 等. 双钨极TIG电弧-熔池传热与流动数值模拟[J]. 金属学报, 2015, 51(2): 178 ? 190
Wang Xinxin, Fan Ding, Huang Jiankang, et al. Numerical simulation of heat transfer and fluid flow in double electrodes TIG arc -weld pool[J]. Acta Metallurgica Sinica, 2015, 51(2): 178 ? 190
[6] John C Lippold, Damian J Kotecki. 不锈钢焊接冶金学及焊接性[M]. 陈剑虹, 译. 北京: 机械工业出版社, 2008.
John C Lippold, Damian J Kotecki. Welding metallurgy and weldability of stainless steels[M]. Chen Jianhong, trans. Beijing: China Machine Press, 2008.
[7] 王文斌. 单相奥氏体合金激光焊接凝固裂纹敏感性研究[D]. 镇江: 江苏大学, 2021.
Wang Wenbing. Study on solidification cracking susceptibility of single-phase austenitic alloys during laser welding[D]. Zhenjiang: Jiangsu University, 2021.
[8] 彭云, 宋亮, 赵琳, 等. 先进钢铁材料焊接性研究进展[J]. 金属学报, 2020, 56(4): 601 ? 618
Peng Yun, Song Liang, Zhao Lin, et al. Research status of weldability of advanced steel[J]. Acta Metallurgica Sinica, 2020, 56(4): 601 ? 618
