A combined welding technology of "TIG cold welding + UNGW" in this paper was proposed, in order to effectively solve the problem of welding heat affected zone(HAZ) grain coarsening in ferritic stainless steel, and the problem of forming vermicular δ ferrite in the part of fusion zone of the welded joint and near welding HAZ for welding of austenitic stainless steel, which significantly reduces corrosion resistance in this areas. Welding between 1Cr17/1Cr18Ni9Ti thick wall dissimilar stainless steels was conducted, meanwhile the microstructure, mechanical properties and corrosion resistance of the welded joint were tested and analyzed. The result shows that the HAZ grains of 1Cr17 base metal of combined welded joint are not coarsened, moreover, there is no vermicular δ ferrite in the part of fusion zone and near heat affected zone of 1Cr18Ni9Ti base metal. The tensile strength of combined welded joint is better than that of 1Cr17 base metal, and the impact absorption energy of HAZ of 1Cr17 base metal is equivalent to that of the 1Cr17 base metal. It shows a downward trend of corrosion resistance from the cladding layer of combined welded joint, the 1Cr18Ni9Ti base metal, 1Cr17 base metal, UNGW weld zone to the welded joint.
ZHENG Shaoxian
,
WANG Junping
,
ZHAO Xilong
,
SHI Wei
. Microstructure and mechanical property of the thick-walled dissimilar steel joint of FSS/ASS with the combined "TIG cold welding + UNGW"[J]. Transactions of The China Welding Institution, 2022
, 43(7)
: 28
-35
.
DOI: 10.12073/j.hjxb.20210720001
[1] 郑淮北, 叶晓宁, 张雪峰, 等. 12%Cr铁素体不锈钢粗晶区组织转变和晶粒长大及析出相分析[J]. 焊接学报, 2011, 32(6): 37 ? 40
Zheng Huaibei, Ye Xiaoning, Zhang Xuefeng, et al. Microstructure transformation, grain growth and precipitated phase of 12%Cr ferritic stainless steel in coarse grain zone[J]. Transactions of the China Welding Institution, 2011, 32(6): 37 ? 40
[2] Lippold J C, Kotecki D J. 不锈钢焊接冶金学及焊接性[M]. 陈剑虹, 译. 北京: 机械工业出版社, 2008.
Lippold J C, Kotecki D J. Welding metallurgy and weldability of stainless steel[M]. Chen Jianhong, trans. Beijing: China Machine Press, 2008.
[3] 郑韶先, 徐龙强, 杜宝峰, 等. 1Cr18Ni9Ti不锈钢脉冲超窄间隙焊接头的组织及耐腐蚀性能[J]. 机械工程材料, 2021, 45(4): 13 ? 18
Zheng Shaoxian, Xu Longqiang, Du Baofeng, et al. Microstructures and corrosion resistance of 1Cr18Ni9Ti stainless steel pulsed ultra-narrow-gap welded joint[J]. Materials for Mechanical Engineering, 2021, 45(4): 13 ? 18
[4] 尚文娟. 430铁素体不锈钢焊接接头脆化及低热输入焊接工艺研究[D]. 兰州: 兰州理工大学, 2013.
Shang Wenjuan. Study on welded joint embrittlement and low heat input welding technology of 430 ferritic stainless steel[D]. Lanzhou: Lanzhou University of Technology, 2013.
[5] 贺舒榕, 王文先, 张婷婷, 等. 铁素体不锈钢CMT焊接接头HAZ组织性能研究[J]. 机械工程与自动化, 2014(5): 97 ? 98
He Shurong, Wang Wenxian, Zhang Tingting, et al. Microstructures and properties of ferritic stainless steel CMT welding HAZ[J]. Mechanical Engineering & Automation, 2014(5): 97 ? 98
[6] 刘腊腊, 胡绳荪, 申俊琦, 等. 激光焊接热输入对26Cr-3.5Mo铁素体不锈钢组织性能的影响[J]. 中国激光, 2015, 42(2): 101 ? 107
Liu Lala, Hu Shengsun, Shen Junqi, et al. Effect of laser welding heat input on microstructure and properties of 26Cr-3.5Mo ferritic stainless steel[J]. Chinese Journal of Lasers, 2015, 42(2): 101 ? 107
[7] Reddy G M, Mohandas T, Rao A S, et al. Influence of welding processes on microstructure and mechanical properties of dissimilar austenitic-ferritic stainless steel welds[J]. Materials and Manufacturing Processes, 2007, 20(2): 147 ? 173.
[8] 郑韶先, 汪军平, 杨妹娟, 等. 1Cr17不锈钢表面TIG冷焊重熔和丝材熔敷工艺及改性层的组织和性能[J]. 机械工程材料, 2021, 45(12): 42 ? 48
Zheng Shaoxian, Wang Junping, Yang Meijuan, et al. Remelting and wire cladding process by TIG cold welding on surface of 1Cr17 stainless steel and microstructures and properties of modified layers[J]. Materials for Mechanical Engineering, 2021, 45(12): 42 ? 48
[9] 郑韶先, 时哲, 韩峰, 等. 超细颗粒焊剂约束电弧超窄间隙焊接1Cr18Ni9Ti不锈钢的焊缝成形分析[J]. 焊接学报, 2015, 36(2): 67 ? 70
Zheng shaoxian, Shi Zhe, Han Feng, et al. Ultra-narrow-gap weld of 1Cr18Ni9Ti stainless steel with constricted arc by ultra-fine granular flux[J]. Transactions of the China Welding Institution, 2015, 36(2): 67 ? 70
[10] 张勇, 覃作祥, 许鸿吉, 等. 经济型铁素体不锈钢焊接接头组织与耐蚀性能[J]. 焊接学报, 2012, 33(12): 18 ? 22
Zhang Yong, Qin Zuoxiang, Xu Hongji, et al. Microstructure and corrosion resistance of welding joints of economic ferritic stainless steel[J]. Transactions of the China Welding Institution, 2012, 33(12): 18 ? 22
