The fracture behavior of inclusions in large SA508.Gr3 low alloy steel forgings under welding thermal cycling was studied by simulating tensile test. The results show that the large SA508.Gr3 low alloy steel forgings with circular notches still have good plastic deformation ability under welding thermal cycling conditions, and more than 20% elongation is obtained. Cracks are not easy to occur in high temperature tension. When the micro-metallurgy in the forging base metal has sharp angle and the inclusions exceed the critical size, the base metal will have 0.2% strain loss under thermal cycling, and the cracks are easy to induce at the sharp angle area. In actual production, it is necessary to eliminate the deficiency of sharp angle exceeding critical size in base metal.
WU Yidang
,
ZHANG Bin
,
YANG Zhipeng
,
QIAO Mu
,
ZHANG Maolong
. Fracture behavior analysis of inclusions in large forgings of SA508.Gr3 low alloy steel[J]. Transactions of The China Welding Institution, 2019
, 40(5)
: 54
-59
.
DOI: 10.12073/j.hjxb.2019400127
[1] Corner A, Venables D, Spenec A, et al. Nuclear power, climate change and energy security:exploring British public attitudes[J]. Energy Policy, 2011, 39(9):4823-4833.
[2] 欧阳予,汪达升.国际核能应用及其前景展望与我国核电的发展[J].华北电力大学学报, 2007, 34(5):1-10 Ou Yangyu, Wang Dasheng. International nuclear power application and its prospect forecast and our country nuclear electricity development[J]. Journal of North Electric Power University, 2007, 34(5):1-10
[3] Toth F L, Rogner H H. Oil and nuclear power:Past, present, and future[J]. Energy Economics, 2006, 28(1):1-25.
[4] van der Zwaan B.C.C Nuclear energy:tenfold expansion or phase-out?[J]. Technological Forecasting and Social Change, 2002, 69(3):287-307.
[5] 陈剑辉,杨军,杨巨文,等.焊后热处理时间对奥氏体不锈钢焊缝熔敷金属力学性能的影响[J].焊接, 2014(11):39-44 Chen Jianhui, Yang Jun, Yang Juwen, et al. Influence of PWHT time on mechanical properties of austenitic stainless steel weld metal[J]. Welding&Joining, 2014(11):39-44
[6] 雷中黎,吴义党,乔木,等.核电厂核岛主设备制造焊接质量及其控制[M].北京:中国电力出版社, 2014.
[7] 中国机械工程学会焊接学会.焊接手册(焊接方法及设备)第3版[M].机械工业出版社, 2008.
[8] 王志锋,陈佩寅,吴伟,等.厚板带极埋弧堆焊温度场的有限元模拟[J].焊接学报, 2009, 30(1):89-92 Wang Zhifeng, Chen Peiyin, Wu Wei, et al. Finite element simulation of temperature field for submerged arc strip overlaying on thick plate[J]. Transactions of the China Welding Institution, 2009, 30(1):89-92
[9] Jinya K, Hiroyuki N, Makoto D, et al. Assessments of residual stress due to weld-overlay cladding and structural integrity of reactor pressure vessel[C]//Proceeding of the ASME 2010 pressure vessels&piping division. K-PVP confenence, 2010, Bellevue, Washington, USA. 1-7.
[10] 吴义党,杨志鹏,刘鸣宇,等.核岛主设备带极埋弧堆焊层残余应力研究[J].南昌航空大学学报,自然科学版, 2016, 30(2):103-108 Wu Yidang, Yang Zhipeng, Liu Mingyu, et al. Study on residual stress of submerge arc strip cladding layer of nuclear island main equipment[J]. Journal of Nanchang Hangkong University,Natural Sciences, 2016, 30(2):103-108
