通过建立旋转电弧传感器扫描V形坡口焊缝时焊枪空间姿态数学模型，提取焊枪三维信息，根据V形坡口焊缝特点，推导出焊枪纠正偏差后ABB机器人的工具坐标系相对于基坐标系的变换矩阵，结合机器人逆运动学，建立了ABB机器人对V形坡口焊缝跟踪纠偏的数学模型，并针对该模型的求解提出了一种渐进粒子群优化算法，利用LABVIEW并结合该算法对该模型进行仿真分析，得出了左右、高低跟踪偏差. 结果表明，模型具有准确性、有效性以及该算法的高效性，为旋转电弧传感器与ABB机器人相结合对V形坡口焊缝进行自动焊接提供了理论依据.
By establishing the mathematical model of the torch's spatial attitude when the rotary arc sensor scans the V-groove weld seam, extracting three-dimensional information of welding torch, combining the characteristics of V-groove weld, the transformation matrix between tool coordinate system and base coordinate system of ABB robot after correcting deviation of welding torch is derived. Combining the inverse kinematics of the robot, mathematical model of tracking and correcting deviation of V-groove weld by ABB robot is established, an Asymptotic Particle Swarm Optimization algorithm is proposed for solving the model. Last, the model is simulated and analyzed by using LABVIEW and the algorithm, the left and right tracking deviations and the high and low tracking deviations are obtained. The accuracy and validity of the model and the efficiency of the algorithm are verified, it provides a theoretical basis for the automatic welding of V-groove weld by the combination of rotating arc sensor and ABB robot.
[1] 洪波, 姚强, 尹力, 等. 基于Delaunay三角剖分的磁控旋转电弧堆焊自由曲面重建[J]. 焊接学报, 2018, 39(5): 25 - 28
Hong Bo, Yao Qiang, Yin Li, et al. Reconstruction of free-form surface based on Delaunay triangulation for magnetic control arc surfacing[J]. Transactions of the China Welding Institution, 2018, 39(5): 25 - 28
[2] Zhu Y J, Wu Z S, Li K, et al. Welding deviation detection method based on weld pool image contour features[J]. China Welding, 2019, 28(2): 35 - 44.
[3] 石永华, 王国荣, YOO W S, 等. 高速旋转电弧传感器的数学模型[J]. 机械工程学报, 2007, 43(11): 25 - 28
Shi Yonghua, Wang Guorong, YOO W S, et al. Mathematical model of high speed rotating arc sensor[J]. Chinese Journal of Mechanical Engineering, 2007, 43(11): 25 - 28
[4] 陈伟荣, 张华, 郑敏, 等. 旋转电弧传感器的结构优化及散热分析[J]. 热加工工艺, 2018, 47(17): 233 - 235
Chen Weirong, Zhang Hua, Zheng Min, et al. Structure optimization and heat dissipation analysis of rotating arc sensor[J]. Hot Working Technology, 2018, 47(17): 233 - 235
[5] Jeong S K, Lee G Y, Lee W K, et al. Development of high speed rotating arc sensor and seam tracking controller for welding robots[C]//ISIE 2001. 2001 IEEE International Symposium on Industrial Electronics Proceedings (Cat. No. 01TH8570), IEEE, 2001: 845-850.
[6] 李毅, 陈佳洋, 胡圣贤, 等. 基于旋转电弧的机器人角焊缝跟踪建模及仿真[J]. 中国机械工程, 2018, 29(3): 348 - 352
Li Yi, Chen Jiayang, Hu Shengxian, et al. Modeling and simulation of robot fillet weld tracking based on rotating arcs[J]. China Machinery Engineering, 2018, 29(3): 348 - 352
[7] 高延锋, 张华, 肖建华. 旋转电弧传感器焊枪空间姿态识别[J]. 焊接学报, 2009, 30(3): 78 - 81
Gao Yanfeng, Zhang Hua, Xiao Jianhua. Identification of welding torch attitude based on rotational arc sensor[J]. Transactions of the China Welding Institution, 2009, 30(3): 78 - 81
[8] 邢红辉, 王保升, 洪磊, 等. 基于MATLAB的六自由度焊接机器人的运动学仿真与轨迹规划[J]. 机械制造与设计工程, 2018, 47(12): 102 - 125
Xing Honghui, Wang Baosheng, Hong Lei, et al. Kinematics simulation and trajectory panning of 6-dof welding robot based on MATLAB[J]. Machine Design and Manufacturing Engineering, 2018, 47(12): 102 - 125
[9] 陈刚, 闫飞, 龚啸, 等. 基于参数优化的最小二乘支持向量机状态估计方法[J]. 电力系统保护与控制, 2011, 49(19): 125 - 128
Chen Gang, Yan Fei, Gong Xiao, et al. State estimation of least squares support vector machine based on parameter optimization[J]. Power System Protection and Control, 2011, 49(19): 125 - 128
[10] Poddar S, Kumar A. Scale-free PSO for in-run and infield inertial sensor calibration[J]. Measurement, 2019, 14(5): 147 - 153.
