Special Issue on Processing of Biological Tissue

3D Cohesive Finite Element Minimum Invasive Surgery Simulation Based on Kelvin-Voigt Model

  • Yonghang Jiang ,
  • Qinghua Song ,
  • Xichun Luo
Expand
  • 1. Centre for Precision Manufacturing, Department of Design Manufacturing & Engineering Management, University of Strathclyde, Glasgow, G1 1XJ, UK;
    2. Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, 250013, China

Received date: 2021-06-01

  Revised date: 2022-04-22

  Online published: 2022-10-24

Supported by

Supported by Natural Science Foundation of Shandong Province (Grant No. ZR2019JQ19), Interdisciplinary Research Project of Shandong University (Grant No. 2017JC027), and China Scholarship Council (CSC)

Abstract

Minimally invasive surgery is an important technique used for cytopathological examination. Recently, multiple studies have been conducted on a three-dimensional (3D) puncture simulation model as it can reveal the internal deformation state of the tissue at the micro level. In this study, a viscoelastic constitutive equation suitable for muscle tissue was derived. Additionally, a method was developed to define the fracture characteristics of muscle tissue material during the simulation process. The fracture of the muscle tissue in contact with the puncture needle was simulated using the cohesive zone model and a 3D puncture finite element model was established to analyze the deformation of the muscle tissue. The stress nephogram and reaction force under different parameters were compared and analyzed to study the deformation of the biological soft tissue and guide the actual operation process and reduce pain.

Cite this article

Yonghang Jiang , Qinghua Song , Xichun Luo . 3D Cohesive Finite Element Minimum Invasive Surgery Simulation Based on Kelvin-Voigt Model[J]. Chinese Journal of Mechanical Engineering, 2022 , 35(3) : 65 -65 . DOI: 10.1186/s10033-022-00743-y

References

[1] D S Keller, R N Tahilramani, J R Flores-Gonzalez, et al. Transanal minimally invasive surgery: review of indications and outcomes from 75 consecutive patients. Journal of the American College of Surgeons, 2016, 222(5): 814-822.
[2] N Hansen-Algenstaedt, M K Kwan, P Algenstaedt, et al. Comparison between minimally invasive surgery and conventional open surgery for patients with spinal metastasis: a prospective propensity score-matched study. Spine, 2017, 42(10): 789-797.
[3] G Gandaglia, K R Ghani, A Sood, et al. Effect of minimally invasive surgery on the risk for surgical site infections: results from the national surgical quality improvement program (NSQIP) database. Jama Surgery, 2016, 149(10): 1039.
[4] G Dieberg, N A Smart, N King. Minimally invasive cardiac surgery: a systematic review and meta-analysis. International Journal of Cardiology, 2016, 223: 554-560.
[5] W Henry, J Haslach. Nonlinear viscoelastic, thermodynamically consistent, models for biological soft tissue. Biomechanics Modeling in Mechanobiology, 2005; 3: 172-189.
[6] R Eduard. Modeling large-deformation-induced microflow in soft biological tissues. Theoretical and Computational Fluid Dynamics, 2006, 20: 251-276.
[7] X Jia, S Liao, X Duan, et al. Anisotropic finite element modeling based on a harmonic field for patient-specific sclera. BioMed Research International, 2017: 1-10.
[8] B R Chintada, R Rau, O Goksel. Nonlinear characterization of tissue viscoelasticity with acoustoelastic attenuation of shear waves. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2021, 69(1): 38-53.
[9] Y Zhang, Y Guo, X Long, et al. Analysis of the main soft tissue stress associated with flexible flatfoot deformity: a finite element study. Biomechanics and Modeling in Mechanobiology, 2021, 20(6): 2169-2177.
[10] P J Sung, W P Tae, S C Won. Dynamic analysis of rubber-like material using absolute nodal coordinate formulation based on the non-linear constitutive law. Nonlinear Dynamics, 2011, 63(1): 149-157.
[11] D R Nolan, A L Gower, M Destrade, et al. A robust anisotropic hyperelastic formulation for the modelling of soft tissue. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 39: 48-60.
[12] X G Fang, J S Xu, X Chen. A visco-hyperelastic constitutive model for EPDM soft PSD of dual-pulse motors. Acta Aeronautica et Astronautica Sinica, 2018, 39(11): 115-123.
[13] A Chanda, S Chatterjee, V Gupta. Soft composite based hyperelastic model for anisotropic tissue characterization. Journal of Composite Materials, 2020, 54(28): 4525-4534.
[14] M Eto, H Tsukihara, E Kobayashi, et al. In-Vivo and In-Vitro mechanical properties of pig liver during needle puncture for needle insertion. 2019 IEEE 1st Global Conference on Life Sciences and Technologies (Life Tech), 2019: 155-159.
[15] A M Okamura, C Simone, M D O'leary. Force modeling for needle insertion into soft tissue. IEEE Transactions on Biomedical Engineering, 2004, 51(10): 1707-1716.
[16] L Tan, X Qin, Q Zhang, et al. Effect of vibration frequency on biopsy needle insertion force. Medical Engineering & Physics, 2017, 43: 71.
[17] X Yu, H Wang, X Ning, et al. Needle-shaped ultrathin piezoelectric microsystem for guided tissue targeting via mechanical sensing. Nature Biomedical Engineering, 2018, 2(3): 165-172.
[18] W Y Liu, Z Y Yang, P Li, et al. Mechanics of tissue rupture during needle insertion in transverse isotropic soft tissue. Medical and Biological Engineering and Computing, 2019, 57(6): 1353-1366.
[19] Z Liao, D A Axinte. On chip formation mechanism in orthogonal cutting of bone. International Journal of Machine Tools & Manufacture, 2016, 102: 41-55.
[20] Y H Jiang, Q H Song, F Gao, et al. Needle deformation in the process of puncture surgery: experiment and simulation. Procedia CIRP, 2020, 89: 270-276.
[21] C Noble, O Van der Sluis, R M J Voncken, et al. Simulation of arterial dissection by a penetrating external body using cohesive zone modelling. Journal of the Mechanical Behavior of Biomedical Materials, 2017, 71: 95-105.
[22] K Tagawa, T Yamada, H T Tanaka. A study on corotated nonlinear deformation model for simulating soft tissue under large deformation. Innovation in Medicine and Healthcare 2015. Springer International Publishing, 2016: 333-343.
[23] F Gao, Q H Song, Z Q Liu, et al. Influence of a biocompatible hydrophilic needle surface coating on a puncture biopsy process for biomedical applications. Coatings, 2020, 10(2): 178.
[24] H Xie, J Song, Y Zhong, et al. Kalman Filter Finite Element Method for Real-time Soft Tissue Modeling. IEEE Access, 2020, 8: 53471-53483.
[25] A Mendizabal, P Márquez-Neila, S Cotin. Simulation of hyperelastic materials in real-time using deep learning. Medical Image Analysis, 2020, 59: 101569.
[26] D Ratovoson, V Huon, F Jourdan. A 3D finite element model for hyperthermia injury of blood-perfused skin. Computer Methods in Biomechanics and Biomedical Engineering, 2015, 18(3): 233-242.
[27] A V Goncharsky, S Y Romanov, S Y Seryozhnikov. A computer simulation study of soft tissue characterization using low-frequency ultrasonic tomography. Ultrasonics, 2016, 67: 136-150.
[28] C L Lin, G J Lan. A computational approach to investigate optimal cutting speed configurations in rotational needle biopsy cutting soft tissue. Computer Methods in Biomechanics and Biomedical Engineering, 2019, 22(1): 84-93.
[29] L Wang, D Gao, J Fu, et al. Simulation of coupling process of flexible needle insertion into soft tissue based on ABAQUS. Computers, Materials and Continua, 2020, 64(2): 1153-1169.
[30] Y H Xiang, D M Zhong, S Rudykh, et al. A review of physically-based and thermodynamically-based constitutive models for soft materials. Journal of Applied Mechanics, 2020: 1-47.
Outlines

/