Chinese Journal of Mechanical Engineering >

2021 , Vol. 34 >Issue 6: 120 - 120

DOI: https://doi.org/10.1186/s10033-021-00649-1

Original Article

Investigation on the Flow Behavior of Side Channel Pumps Based on Vortex Identification

  • Fan Zhang ,
  • Desmond Appiah ,
  • Ke Chen ,
  • Shouqi Yuan ,
  • Kofi Asamoah Adu-Poku ,
  • Lufeng Zhu
Expand
  • 1 National Research Center of Pumps, Jiangsu University, Zhenjiang, 212013, China;
    2 Department of Physics Education, University of Education, Winneba, Ghana

Received date: 2020-12-04

  Revised date: 2021-09-30

  Online published: 2022-04-03

Supported by

Supported by National Natural Science Foundation of China (Grant Nos. 51809121, 51879121), China Postdoctoral Science Foundation (Grant No. 2021M701535).

Fold

Abstract

The momentum flow exchange between the impeller and side channel produces highly turbulent flows in side channel pumps. The turbulent flows feature complex patterns of vortex structures that are partly responsible for the dissipation of energy losses and unsteady pressure pulsations. The concept of turbulent flows in side channel pumps requires a reliable vortex identification criterion to capture and predict the effects of the vortex structures on the performance. For this reason, the current study presents the application of the new Ω-criterion to a side channel pump model in comparison with other traditional methods such as Q and λ2 criteria. The 3D flow fields of the pump were obtained through unsteady Reynolds-averaged Navier-Stokes (RANS) simulations. Comparative studies showed that the Ω-criterion identifies the vortex of different intensities with a standard threshold, Ω=0.52. The Q and λ2 criteria required different thresholds to capture vortex of different intensities thus leads to subjective errors. Comparing the Ω-criterion intensity on different planes with the entropy losses and pressure pulsation, the longitudinal vortex plays an important role in the momentum exchange development which increases the head performance of the pump. However, the rate of exchange is impeded by the axial and radial vortices restricted in the impeller. Therefore, the impeller generates the highest entropy loss and pressure pulsation intensities which lower the output efficiency. Finally, the findings provide a fundamental background to the morphology of the vortex structures in the turbulent flows which can be dependent upon for efficiency improvement of side channel pumps.

Key words： Side channel pumps; Ω-criterion; Vortex; Entropy loss

Cite this article

Fan Zhang , Desmond Appiah , Ke Chen , Shouqi Yuan , Kofi Asamoah Adu-Poku , Lufeng Zhu . Investigation on the Flow Behavior of Side Channel Pumps Based on Vortex Identification[J]. Chinese Journal of Mechanical Engineering, 2021 , 34(6) : 120 -120 . DOI: 10.1186/s10033-021-00649-1

References

[1] C Q Liu, J M Liu. Modified normalized Rortex/vortex identification method. Physics of Fluids, 2019, 31(6):061704.
[2] J Hunt, A A Wray, P Moin. Eddies, streams, and convergence zones in turbulent flows. Studying Turbulence Using Numerical Simulation Databases-I1, 1988:193.
[3] J Jeong, F Hussain. On the identification of a vortex. Journal of Fluid Mechanics, 1995, 285:69-94.
[4] Y F Wang, F Zhang, S Q Yuan, et al. Effect of URANS and hybrid RANS-large eddy simulation turbulence models on unsteady turbulent flows inside a side channel pump. Journal of Fluids Engineering, 2020, 142(6):061503.
[5] A V Minakov, D V Platonov, A A Dekterev, et al. The analysis of unsteady flow structure and low frequency pressure pulsations in the high-head Francis turbines. International Journal of Heat and Fluid Flow, 2015, 53:183-194.
[6] T Asim, R Mishra, B Nsom. Visualisation of turbulent structures in a centrifugal pump's volute using large eddy simulation. 24th Congrès Français de Mécanique, Brest, France, August 26-230, 2019.
[7] T Mihalić, Z Guzović, A Predin, et al. Performances and flow analysis in the centrifugal vortex pump. Journal of Fluids Engineering, 2013, 135(1):011002-1.
[8] Y Liu, L Tan. Tip clearance on pressure fluctuation intensity and vortex characteristic of a mixed flow pump as turbine at pump mode. Renewable energy, 2018, 129:606-615.
[9] T Günther, M Schulze, H Theisel, et al. Rotation invariant vortices for flow visualization. IEEE transactions on visualization and computer graphics, 2015, 22(1):817-826.
[10] H Chang, R K Agarwal, W Li, et al. Numerical and experimental study of a vortex structure and energy loss in a novel self-priming pump. Processes, 2019, 7(10):701.
[11] Y Liu, L Tan. Spatial-temporal evolution of tip leakage vortex in a mixed-flow pump with tip clearance. Journal of Fluids Engineering, 2019, 141(8):081302.
[12] Y Liu, L Tan. Theoretical prediction model of tip leakage vortex in a mixed flow pump with tip clearance. Journal of Fluids Engineering, 2020, 142(2):021203.
[13] C Q Liu, Y Q Wang, Y Yang, et al., New omega vortex identification method. Science China Physics, Mechanics & Astronomy, 2016, 59(8):684711.
[14] Y Zhang, K Liu, J Li, et al. Analysis of the vortices in the inner flow of reversible pump turbine with the new omega vortex identification method. Journal of Hydrodynamics, 2018, 30(3):463-469.
[15] Y Wang, W Zhang, X Cao, et al. The applicability of vortex identification methods for complex vortex structures in axial turbine rotor passages. Journal of Hydrodynamics, 2019, 31(4):700-707.
[16] C T Tran, X Long, B Ji. Vortical structures in the cavitating flow in the Francis-99 draft tube cone under off-design conditions with the new omega vortex identification method. Journal of Physics:Conference Series. IOP Publishing,, NTNU, Trondheim, Norway, May 28-29, 2019, 1296(1):012011.
[17] Y S Gao, C Q Liu. Rortex based velocity gradient tensor decomposition. Physics of Fluids, 2019, 31(1):011704.
[18] Y Q Wang, Y S Gao, C Q Liu. Galilean invariance of Rortex. Physics of Fluids, 2018, 30(11):111701.
[19] Y Q Wang, Y Y Yang, G Yang, et al. DNS study on vortex and vorticity in late boundary layer transition. Communications in Computational Physics, 2017, 22(2):441-459.
[20] D Appiah, F Zhang, S Q Yuan, et al. Effects of the geometrical conditions on the performance of a side channel pump:A review. International Journal of Energy Research, 2017, 42(2):416-428.
[21] J Pei, M K Osman, W J Wang, et al. Unsteady flow characteristics and cavitation prediction in the double-suction centrifugal pump using a novel approach. Proceedings of the Institution of Mechanical Engineers, Part A:Journal of Power and Energy, 2020, 234(3):283-299.
[22] A Fleder, M Böhle. A systematical study of the influence of blade length, blade width, and side channel height on the performance of a side channel pump. Journal of Fluids Engineering, 2015, 137(12):121102.
[23] J Pei, F Zhang, D Appiah, et al. Performance prediction based on effects of wrapping angle of a side channel pump. Energies, 2019, 12(1):139.
[24] F Zhang, D Appiah, F Hong, et al. Energy loss evaluation in a side channel pump under different wrapping angles using entropy production method. International Communications in Heat and Mass Transfer, 2020, 113:104526.
[25] F Zhang, D Appiah, J F Zhang, et al. Transient flow characterization in energy conversion of a side channel pump under different blade suction angles. Energy, 2018, 161:635-648.
[26] F Zhang, K Chen, D Appiah, et al. Numerical delineation of 3D unsteady flow fields in side channel pumps for engineering processes. Energies, 2019, 12(7):1287.
[27] X Y Wei, F Zhang, D Appiah, et al. Pressure fluctuation reduction in side channel pumps using a modified impeller blade. Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineer, San Francisco, California, USA, July 28-August 1, 2019, AJKFluids:2019-4932.
[28] F Zhang, A Fleder, M Böhle, et al. Effect of suction side blade profile on the performance of a side channel pump. Proceedings of the Institution of Mechanical Engineers, Part A:Journal of Power and Energy, 2016, 230(6):586-597.
[29] F Menter. Zonal two equation kW turbulence models for aerodynamic flows. 23rd fluid dynamics, plasmadynamics, and lasers conference. Orlando, USA. July 06-09, 1993.. https://doi.org/10.2514/6.1993-2906
[30] F Menter. Two-equation eddy-viscosity turbulence models for engineering applications. AIAA journal, 1994, 32(8):1598-1605.
[31] M Böhle, A Fleder, M Mohr. Study of the losses in fluid machinery with the help of entropy. 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, United States, Apr 2016.
[32] A Fleder, M Böhle. Numerical and experimental investigations on the influence of the blade shape on industrial side channel pumps. International Rotating Equipment Conference, 2012.
[33] M Liu, L Tan, S L Cao. Dynamic mode decomposition of gas-liquid flow in a rotodynamic multiphase pump. Renewable Energy, 2019, 139:1159-1175.
[34] Y Han, L Tan. Dynamic mode decomposition and reconstruction of tip leakage vortex in a mixed flow pump as turbine at pump mode. Renewable Energy, 2020, 155:725-734.
[35] X R Dong, Y Q Wang, X P Chen, et al. Determination of epsilon for Omega vortex identification method. Journal of Hydrodynamics, 2018, 30(4):541-548.
[36] Y L Dong, Y Yang, C Q Liu. DNS study on three vortex identification methods. 55th AIAA Aerospace Sciences Meeting, Grapevine, Texas, January 9-13, 2017, AIAA:2017-0137.
[37] F Zhang, D Appiah, K Chen, et al. Dynamic characterization of vortex structures and their evolution mechanisms in a side channel pump. Journal of Fluids Engineering, 2020, 142(11):111502.
[38] F Kock, H Herwig. Entropy production calculation for turbulent shear flows and their implementation in CFD codes. International Journal of Heat and Fluid Flow, 2005, 26(4):672-680.
[39] F Kock, H Herwig. Local entropy production in turbulent shear flows:a high-Reynolds number model with wall functions. International Journal of Heat and Fluid Flow, 2004, 47(10-11):2205-2215.
Options
Outlines

/

〈 〉

　 Copyright © Chinese Journal of Mechanical Engineering, All Rights Reserved.
Powered by Beijing Magtech Co. Ltd,.