[1] J Allison, D Backman, L Christodoulou. Integrated computational materials engineering:A new paradigm for the global materials profession.JOM, 2006, 58(11):25-27.
[2] H Danninger. What will be the future of powder metallurgy? Powder Metallurgy Progress, 2018, 18(2):70-79.
[3] B Leupold, V Janzen, G Kotthoff, et al. Validation approach of PM gears for eDrive applications. International Conference on Gears 2017, VDI Verlag, Düsseldorf, 2017, 2:119-131.
[4] V Kruzhanov, V Arnhold. Energy consumption in powder metallurgical manufacturing.Powder Metallurgy, 2012, 55(1):14-21.
[5] E Gräser, M Hajeck, A Bezold, et al. Optimized density profiles for powder metallurgical gears.Production Engineering, 2014, 8(4):461-468.
[6] G A Kotthoff. Neue Verfahren zur Tragfähigkeitssteigerung von gesinterten Zahnrädern. Shaker, Aachen, 2003. (in German)
[7] T Frech, P Scholzen, P Schäflein, et al. Design for PM challenges and opportunities for powder metal components in transmission technology. Procedia CIRP, 2018, 70:186-191.
[8] P Beiss. Pulvermetallurgische Fertigungstechnik. 2nd ed. Springer-Verlag, New York, 2013.
[9] H Altena, H Danninger. Wärmebehandlung von Sinterstahl-Präzisionsteilen:II. Prozess- und Anlagentechnik. BHM Berg- und Hüttenmännische Monatshefte, 2005, 150(5):170-175.
[10] P Kauffmann. Walzen pulvermetallurgisch hergestellter Zahnräder. Apprimus, Aachen, 2013. (in German)
[11] Norm. Zahnschäden an Zahnradgetrieben Bezeichnung. Merkmale, Ursachen, Beuth, Berlin, 1979.
[12] J Sauter, I Schmidt, M Schulz. Einflussgrössen auf die Leistungs-fähigkeit einsatzgehärteter Zahnräder. Traitement Thermique (Paris), 1992, 252:53-62.
[13] D V Doane. Carburized steel-update on a mature composite. Journal of Heat Treating, 1990, 8(1):33-53.
[14] K Feltkamp. Untersuchungen über den Einfluß von Fertigungsfehlern und Zahnfußausrundungen auf die Zahnfußbeanspruchung und die Tragfähigkeit gehärteter Stirnräder. Rheinisch-Westfälische Technische Hochschule Aachen, 1967.
[15] D Zuber. Fußtragfähigkeit einsatzgehärteter Zahnräder unter Berücksichtigung lokaler Materialeigenschaften. Shaker, Aachen, 2008. (in German)
[16] H Strasser. Einflüsse von Verzahnungsgeometrie, Werkstoff und Wärmebehandlung auf die Zahnfußtragfähigkeit. München, 1984. (in German)
[17] M Hajeck. Zahnfußtragfähigkeit pulvermetallurgisch hergestellter Zahnräder. Aachen, 2017. (in German)
[18] P A Cundall, O D L Starck. Discrete numerical model for granular assemblies. Geotechnique, 1979, 29(1):47-65.
[19] T Pöschel, T Schwager. Computational granular dynamics. Springer-Verlag, Berlin/Heidelberg, 2005.
[20] S Luding. Introduction to discrete element methods:Basic of contact force models and how to perform the micro-macro transition to continuum theory. European Journal of Environmental and Civil Engineering, 2008, 12(7-8):785-826.
[21] M Abouaf, J L Chenot, G Raisson, et al. Finite element simulation of hot isostatic pressing of metal powders. International Journal for Numerical Methods in Engineering, 1988, 25(1):191-212.
[22] C van Nguyen, S K Sistla, S van Kempen, et al. A comparative study of different sintering models for Al2O3. Journal of the Ceramic Society of Japan, 2016, 124(4):301-312.
[23] K Shinagawa. Micromechanical modelling of viscous sintering and a constitutive equation with sintering stress. Computational Materials Science, 1999, 13(4):276-285.
[24] M Selecka, V Simkulet. Mechanical properties of Fe-0,85Mo-Mn-C steels. Powder Metallurgy World Congress and Exhibition, Vienna, Austria, 2004.
[25] E Rabald. Thermal properties of thirteen metals. ASTM Special Technical Publication Nr. 227, 29 S. American Society for Testing Materials, Philadelphia, 1958.
[26] P D Desai. Thermodynamic properties of iron and silicon. Journal of Physical and Chemical Reference Data, 1986, 15(3):967-983.
[27] J A Rayne, B S Chandrasekhar. Elastic constants of iron from 4.2 to 300K. Physical Review, 1961, 122(6):1714-1716.
[28] J Tang, X Geng, D Li, et al. Machine learning-based microstructure prediction during laser sintering of alumina:A conditional generative approach. Scientific Reports, 2021, 11(1):1-10.
[29] A Iyer, B Dey, A Dasgupta, et al. A conditional generative model for predicting material microstructures from processing methods, 2019.
[30] M McCartney, M Haeringer, W Polifke. Comparison of machine learning algorithms in the interpolation and extrapolation of flame describing functions. Journal of Engineering for Gas Turbines and Power, 2020, 142(6).
[31] F Raether, G Seifert. Modeling inherently homogeneous sintering processes. Advanced Theory and Simulations, 2018, 1(5):1800022.
[32] E A Olevsky, V Tikare, T Garino. Multi-scale study of sintering:A review. Journal of the American Ceramic Society, 2006, 89(6):1914-1922.
[33] M R Dudek, J-F Gouyet, M Kolb. Q+1 state Potts model of late stage sintering. Surface Science, 1998, 401(2):220-226.
[34] S Hara, A Ohi, N Shikazono. Sintering analysis of sub-micron-sized nickel powders:Kinetic Monte Carlo simulation verified by FIB-SEM reconstruction. Journal of Power Sources, 2015, 276:105-112.
[35] Markus W Reiterer, Kevin G Ewsuk. An analysis of four different approaches to predict and control sintering. Journal of the American Ceramic Society, 2009, 92(7):1419-1427.
[36] Y Zhang, X Xiao, J Zhang. Kinetic Monte Carlo simulation of sintering behavior of additively manufactured stainless steel powder particles using reconstructed microstructures from synchrotron X-ray microtomography. Results in Physics, 2019, 13:102336.
[37] C G Cardona, V Tikare, B R Patterson, et al. On sintering stress in complex powder compacts. Journal of the American Ceramic Society, 2012, 95(8):2372-2382.
[38] S I Prokofjev. Estimations of grain-boundary surface tension in elemental solids. Journal of Materials Science, 2017, 52(8):4265-4277.
[39] A Takahashi, N Soneda, M Kikuchi. Computer simulation of microstructure evolution of Fe-Cu alloy during thermal ageing. Key Engineering Materials, 2006, 306-308:917-922.
[40] D Blundell, M Reid, N Zapuskalov, et al. Measurements of the surface diffusion coefficient in iron-carbon alloys using focused ion beam milling and high temperature laser scanning confocal microscopy. Microscopy and Microanalysis, 2005, 11(S02).
[41] E Seebauer. Estimating surface diffusion coefficients. Progress in Surface Science, 1995, 49(3):265-330.
[42] R M German. Sintering theory and practice. Wiley, New York, 1996.
[43] C Simsir, Jon L Dosett, George E Totten. Modeling and simulation of steel heat treatment:Prediction of microstructure, distortion, residual stresses and cracking. ASM Handbook 4B, 2014, 2014:409-466.
[44] T Inoue, T Yamaguchi, Z Wang. Stresses and phase transformations occurring in quenching of carburized steel gear wheel. Materials Science and Technology, 1985, 1(10):872-876.
[45] A Diemar. Simulation des Einsatzhärtens und Abschätzung der Dauerfestigkeit einsatzgehärteter Bauteile, 2007.
[46] P Nusskern. Prozesssimulation der Herstellung einsatzgehärteter pulvermetallurgischer Bauteile. KIT-Bibliothek, Karlsruhe, 2013. (in German).
[47] C Şimşir, C H Gür. 3D FEM simulation of steel quenching and investigation of the effect of asymmetric geometry on residual stress distribution. Journal of Materials Processing Technology, 2008, 207(1-3):211-221.
[48] A Eser, C Broeckmann, C Simsir. Multiscale modeling of tempering of AISI H13 hot-work tool steel-Part 2:Coupling predicted mechanical properties with FEM simulations. Computational Materials Science, 2016, 113:292-300.
[49] D P Koistinen, R E Marburger. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels. Acta Metallurgica, 1959, 7(1):59-60.
[50] M Avrami. Kinetics of phase change:I General theory. The Journal of Chemical Physics, 1939, 7(12):1103-1112.
[51] M Avrami. Kinetics of phase change. II Transformation-time relations for random distribution of nuclei. The Journal of Chemical Physics, 1940, 8(2):212-224.
[52] M Avrami. Granulation, phase change, and microstructure kinetics of phase change III. The Journal of Chemical Physics, 1941, 9(2):177-184.
[53] J-B Leblond, J Devaux, J C Devaux. Mathematical modelling of transformation plasticity in steels I:Case of ideal-plastic phases. International Journal of Plasticity, 1989, 5(6):551-572.
[54] F D Fischer, Q P Sun, K Tanaka. Transformation-induced plasticity (TRIP). Applied Mechanics Reviews, 1996, 49(6):317.
[55] R Quey, P R Dawson, F Barbe. Large-scale 3D random polycrystals for the finite element method:Generation, meshing and remeshing. Computer Methods in Applied Mechanics and Engineering, 2011, 200(17):1729-1745.
[56] S Keusemann, M Hajeck, C Broeckmann, et al. Schwingfestigkeitsbewertung von Sinterstählen in Abhängigkeit von Dichte, Mittelspannung und hochbelastetem Volumen. Keramische Zeitschrift, 2015, 67(7):387-398.
[57] C van Nguyen, A Bezold, C Broeckmann. Anisotropic shrinkage during hip of encapsulated powder. Journal of Materials Processing Technology, 2015, 226:134-145.
[58] F Aurenhammer. Voronoi diagrams-A survey of a fundamental geometric data structure. ACM Computing Surveys, 1991, 23(3):345-405.
[59] Y Deng, A Kaletsch, A Bezold, et al. Precise prediction of near-net-shape HIP components through DEM and FEM simulation. Proceedings of 12th International Conference of Hot Isostatic Pressing, 2017.
[60] M Vattur Sundaram, A Khodaee, M Andersson, et al. Experimental and finite element simulation study of capsule-free hot isostatic pressing of sintered gears. The International Journal of Advanced Manufacturing Technology, 2018, 99(5):1725-1733.
[61] P Beiss, M Dalgic. Structure property relationships in porous sintered steels. Materials Chemistry and Physics, 2001, 67(1-3):37-42.
[62] M Steinbacher, F Hoffmann. Abschlussbericht Forschungsvorhaben:Großprobe:Vergleichbarkeit von Couponproben und Großzahnrad beim Einsatzhärten, FVA, 2009.
