[1] X Yan, J Yang, L Quan. Co-simulation and experiment of wheel loader during operation process. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(16):102-109.
[2] X Wang, J Yang, L Quan, et al. A novel high-efficiency wheel loader power steering system with fault-tolerant capability. IEEE Transactions on Vehicular Technology, 2018, 67(10):9273-9283.
[3] Z Meng, H Zang. Analysis of hydraulic steering system of tracked all-terrain vehicles' articulated mechanism. AIP Conference Proceedings, 2018, 1955(1):030003-1-030003-7.
[4] T Xu, Y Shen, Y Huang, et al. Study of hydraulic steering process for articulated heavy vehicles based on the principle of the least resistance. IEEE/ASME Transactions on Mechatronics, 2019, 24(4):1662-1673.
[5] Zardin B, Borghi M, Gherardini F, et al. Modelling and simulation of a hydrostatic steering system for agricultural tractors. Energies, 2018, 11(1):230.
[6] D Lei, K Deng, YP Gong. The optimum design for pivot points of steering mechanism on HT25J wheel loader. 2011 International Conference on Consumer Electronics, Communications and Networks (CECNet), Xianning, China, April 16-28, 2011:2760-2763.
[7] T J Wang, J S Chen, F Zhao, et al. Combined simulation and test of hydraulic steering system. Journal of Jilin University (Engineering Science Edition), 2013, 43(3):607-612. (in Chinese)
[8] C Wang, Y Zhang, W Zhao. Multi-objective optimization of a steering system considering steering modality. Advances in Engineering Software, 2018, 126:61-74.
[9] K Kitahara, K Kazama, H Mouri. Design of a new steering system to solve the problem of steering operation during low speed driving. Mechanical Engineering Journal, 2019, 6(3):18-00386.
[10] Y Yin, S Rakheja, J Yang, et al. Design optimization of an articulated frame steering system. Proceedings of the Institution of Mechanical Engineers, Part D:Journal of Automobile Engineering, 2018, 232(10):1339-1352.
[11] B W Cao, X H Liu, W Chen, et al. Depth optimization analysis of articulated steering hinge position based on genetic algorithm. Algorithms, 2019, 12(3):55.
[12] AMICO D A. Pressure control in hydraulic power steering systems:division of fluid and mechatronic systems. Sweden:Linköping University. 2013:14-22.
[13] S Haggag, D Alstrom, S Cetinkunt, et al. Modeling, control, and validation of an electro-hydraulic steer-by-wire system for articulated vehicle applications. IEEE/ASME Transactions on Mechatronics, 2005, 10(6):688-692.
[14] K Heybroek, J Larsson, J O Palmberg. Mode switching and energy recuperation in open-circuit pump control. Tampere, Finland:Tampere Univ. Technol., 2009:197-209.
[15] N A Daher, M Ivantysynova. Energy analysis of a traditional steering technology that saves fuel and boosts efficiency. Energy Conversion and Management, 2014, 86:1059-1068.
[16] N A Daher, M Ivantysynova. Pump controlled steer-by-wire system. SAE Technical Papers, 2013:7.
[17] N A Daher. New steering concept for wheel loaders. The 9th International Fluid Power Conference, Aachen, Germany, March 24-26, 2014:112-117.
[18] G P Massarotti. Hydrostatic steering system and energy saving evaluation in idle regime. 10th JFPS International Symposium on Fluid Power, Fukuoka, Octorber 24-27, 2017:2A11-1-2A11-7.
[19] Y Yang, G Zhang, J Zha, et al. Design of automatic steering system based on direct connection of DC motor and full hydraulic steering gear. Transactions of the Chinese Society for Agricultural Machinery, 2020, 51(8):44-54+61.
[20] J Wang, P Hou, H Cai, et al. Continuous angle steering of an optically-controlled phased array antenna based on differential true time delay constituted by micro-optical components. Optics Express, 2015, 23(7):9432.
[21] L He, B Ma and C Zong. Fault-tolerance control strategy for the steering wheel angle sensor of a steer-by-wire vehicle. Chinese Journal of Automotive Engineering, 2015, 37(3):327-330, 345.
[22] W Z Zhao, Y J Li, C Y Wang. Robust control of hand wheel torque for active front steering system. Science China Technological Sciences, 2015, 58(1):107-116.
[23] M Khristamto, A Praptijanto, S Kaleg. Measuring geometric and kinematic properties to design steering axis to angle turn of the electric golf car. Energy Procedia, 2015, 68(1):463-470.
[24] A Dellamico, P Krus. Modeling, simulation, and experimental investigation of an electrohydraulic closed-center power steering system. IEEE/ASME Transactions on Mechatronics, 2015, 20(5):1-11.
[25] X Y Tian, ZC Yu, H Zhou, et al. The design research of the indigenous steering gear. 2016 Chinese Control and Decision Conference (CCDC)IEEE, 2016:6947-6952.
[26] L H Liang, L Y Wang, J F Wang. Energy-saving nonlinear friction compensation method for direct drive volume control flange-type rotary vane steering gear. IEEE Access, 2019, 7:15851-62.
[27] L Liang, L Wang, J Wang. The compensation for nonlinear friction of DDVC flange-type rotary vane steering gear. PLoS ONE, 2018, 13(11):e0207018.
[28] A DellAmico, P Krus. Modeling, simulation, and experimental investigation of an electrohydraulic closed-center power steering system. IEEE/ASME Transactions on Mechatronics, 2015, 20(5), 2452-2462.
[29] Q Q Lu. Simulation analysis and test of full hydraulic steering system for flow amplification. Hangzhou:Zhejiang University, 2010. (in Chinese)
[30] X H Liu, Q W Li, J S Chen, et al. Mathematical modeling and simulation of load-sensing priority valve. Journal of Jilin University (Engineering & Engineering Edition), 2015, 45(6):1817-1824.
[31] B Hu, C J Zhou, H B Wang, et al. Prediction and validation of dynamic characteristics of a valve train system with flexible components and gyroscopic effect. Mechanism and Machine Theory, 2021, 157:104222.
