Chinese Journal of Mechanical Engineering >

2020 , Vol. 33 >Issue 6: 91 - 91

DOI: https://doi.org/10.1186/s10033-020-00506-7

Smart Materials

Efficient Preparation of Nanoparticle-Reinforced Nickel-based Composite Coating with Highly Preferred (220) Orientation

  • Renjie Ji ,
  • Hui Jin ,
  • Yonghong Liu ,
  • Tiancong Dong ,
  • Fan Zhang ,
  • Lilong Zhao ,
  • Xinlei Wu ,
  • Qiang Sun ,
  • Peng Liu ,
  • Hang Dong ,
  • Chi Ma ,
  • Dege Li ,
  • Baoping Cai
Expand
  • 1. College of Mechanical and Electronic Engineering, China University of Petroleum (East China), Qingdao, 266580, China;
    2. Key Laboratory of Unconventional Oil & Gas Development, Ministry of Education, China University of Petroleum (East China), Qingdao, 266580, China

Received date: 2020-04-25

  Revised date: 2020-09-16

  Online published: 2021-03-12

Supported by

Supported by National Natural Science Foundation of China (Grant No. 51675535), Major Research Project of Shandong Province of China (Grant No. 2019GGX104068), Key Pre-Research Foundation of Military Equipment of China (Grant No. 6140923030702), National Science and Technology Major Project of China (Grant No. 2017ZX05072), Graduate Innovation Protect of China University of Petroleum (East China) (Grant No. YCX2020059) and Science and Technology Support Plan for Youth Innovation of Universities in Shandong Province of China (Grant No. 2019KJB016)

Fold

Abstract

Nanoparticle-reinforced metal matrix composite coatings have significant potential in mechanical part surface strengthening owing their excellent mechanical properties. This paper reports a phenomenon in which the grain orientation gradually evolves to (220) as the deposition current density increases when preparing nanoparticle-reinforced nickel-based composite coatings through jet electrodeposition (JED). During the preparation of the Ni-SiC composite coatings, the deposition current density increased from 180 A/dm2 to 220 A/dm2, and TC(220) gradually increase from 41.4% to 97.7%. With an increase of TC(220), the self-corrosion potential increases from-0.575 to-0.477 V, the corrosion current density decreases from 9.52 μA/cm2 to 2.76 μA/cm2, the diameter of the corrosion pits that after 10 days of immersion in a 3.5 wt% NaCl solution decreases from 278-944 nm to 153-260 nm, and the adhesion of the coating increases from 24.9 N to 61.6 N. Compared a conventional electrodeposition (CED), the Ni-SiC composite coating using JED has the advantages of a smooth surface morphology, high corrosion resistance, and strong adhesion, which are more obvious with an increase in TC(220).

Key words： Jet electrodeposition; Composite coating; Preferred orientation; Adhesion force; Corrosion resistance

Cite this article

Renjie Ji , Hui Jin , Yonghong Liu , Tiancong Dong , Fan Zhang , Lilong Zhao , Xinlei Wu , Qiang Sun , Peng Liu , Hang Dong , Chi Ma , Dege Li , Baoping Cai . Efficient Preparation of Nanoparticle-Reinforced Nickel-based Composite Coating with Highly Preferred (220) Orientation[J]. Chinese Journal of Mechanical Engineering, 2020 , 33(6) : 91 -91 . DOI: 10.1186/s10033-020-00506-7

References

[1] R Li, Y Hou, B Liu, et al. Electrodeposition of homogenous Ni/SiO2 nanocomposite coatings from deep eutectic solvent with in-situ synthesized SiO2 nanoparticles. Electrochimica Acta, 2016, 222: 1272-1280.
[2] B Li, D Li, W Chen, et al. Effect of current density and deposition time on microstructure and corrosion resistance of Ni-W/TiN nanocomposite coating. Ceramics International, 2019, 45(4): 4870-4879.
[3] Y Tao, F Ma, M Teng, et al. Designed fabrication of super high hardness Ni-B-Sc nanocomposite coating for anti-wear application. Applied Surface Science, 2019, 492: 426-434.
[4] M Alizadeh, A Cheshmpish. Electrodeposition of Ni-Mo/Al2O3 nano-composite coatings at various deposition current densities. Applied Surface Science, 2019, 466: 433-440.
[5] S Banthia, S Sengupta, S Das, et al. Synthesis and characterization of novel Cu, Cu-SiC functionally graded coating by pulse reverse electrodeposition. Applied Surface Science, 2019, 467-468: 567-579.
[6] C Wang, L Shen, M Qiu, et al. Characterizations of Ni-CeO2 nanocomposite coating by interlaced jet electrodeposition. Journal of Alloys and Compounds, 2017, 727: 269-277.
[7] C Ma, W Yu, M Jiang, et al. Jet pulse electrodeposition and characterization of Ni–AlN nanocoatings in presence of ultrasound. Ceramics International, 2018, 44(5): 5163-5170.
[8] W Jiang, L Shen, M Qiu, et al. Preparation of Ni-SiC composite coatings by magnetic field-enhanced jet electrodeposition. Journal of Alloys and Compounds, 2018, 762: 115-124.
[9] W Cui, K Wang, F Xia, et al. Simulation and characterization of Ni–doped SiC nanocoatings prepared by jet electrodeposition. Ceramics International, 2018, 44(5): 5500-5505.
[10] F F Xia, W C Jia, C Y Ma, et al. Synthesis and characterization of Ni-doped TiN thin films deposited by jet electrodeposition. Applied Surface Science, 2018, 434: 228-233.
[11] H Gao, W Zhen, J Ma, et al. High efficient solar hydrogen generation by modulation of Co-Ni sulfide (220) surface structure and adjusting adsorption hydrogen energy. Applied Catalysis B: Environmental, 2017, 206: 353-363.
[12] A Ponrouch, S Garbarino, E Bertin, et al. Highly porous and preferentially oriented {100} platinum nanowires and thin films. Advanced Functional Materials, 2012, 22(19): 4172-4181.
[13] J Kim, K H Lee, S W Kim, et al. Potential-current co-adjusted pulse electrodeposition for highly (110)-oriented Bi2Te3-xSex films. Journal of Alloys and Compounds, 2019, 787: 767-771.
[14] J A Calderón, J E Henao, M A Gómez. Erosion–corrosion resistance of Ni composite coatings with embedded SiC nanoparticles. Electrochimica Acta, 2014, 124: 190-198.
[15] Y Zhao, L Wang, Y Sun, et al. Influences of Al and Ti particles on microstructure, internal stress and property of Ni composite coatings. Journal of Alloys and Compounds, 2019, 793: 314-325.
[16] M Alizadeh, H Safaei. Characterization of Ni-Cu matrix, Al2O3 reinforced nano-composite coatings prepared by electrodeposition. Applied Surface Science, 2018, 456: 195-203.
[17] J Deng, J Zhang, Y Tu, et al. Effect of BEO in the electrodeposition process of Ni/diamond composite coatings for preparation of ultra-thin dicing blades: Experiments and theoretical calculations. Ceramics International, 2018, 44(14): 16828-16836.
[18] R Ji, K Han, H Jin, et al. Preparation of Ni-SiC nano-composite coating by rotating magnetic field-assisted electrodeposition. Journal of Manufacturing Processes, 2020, 57: 787-797.
[19] N Guglielmi. Kinetics of the deposition of inert particles from electrolytic baths. Journal of the Electrochemical Society, 1972, 119(8): 1009.
[20] J P Celis, J R Roos, C Buelens. A mathematical model for the electrolytic codeposition of particles with a metallic matrix. Journal of the Electrochemical Society, 2019, 134(6): 1402-1408.
[21] S Xie, M Dai, S Lin, et al. Effect of bias voltage on the oxidation resistance of NiCoCrAlYTa coatings prepared by arc ion plating. Corrosion Science, 2019, 147: 330-341.
[22] X Chen, X Qin, Z Zhu, et al. Microstructural evolution and wear properties of the continual local induction cladding NiCrBSi coatings. Journal of Materials Processing Technology, 2018, 262: 257-268.
[23] Y E Sknar, O O Savchuk, I V Sknar. Characteristics of electrodeposition of Ni and Ni-P alloys from methanesulfonate electrolytes. Applied Surface Science, 2017, 423: 340-348.
[24] S Kumaraguru, G G Kumar, S Shanmugan, et al. Enhanced texture and microhardness of the nickel surface using Bi2O3 particles via electrodeposition technique for engineering application. Journal of Alloys and Compounds, 2018, 753: 740-747.
[25] B Li, W Zhang, W Zhang, et al. Preparation of Ni-W/SiC nanocomposite coatings by electrochemical deposition. Journal of Alloys and Compounds, 2017, 702: 38-50.
[26] Y Lv, Y Ding, H Cui, et al. Investigation of microscopic residual stress and its effects on stress corrosion behavior of NiAl bronze alloy using in situ neutron diffraction/EBSD/tensile corrosion experiment. Materials Characterization, 2020, 164: 110351.
[27] F Zhang, R Ji, Y Liu, et al. Defect-rich engineering and F dopant co-modulated NiO hollow dendritic skeleton as a self-supported electrode for high-current density hydrogen evolution reaction. Chemical Engineering Journal, 2020: 126037.
[28] F Zhang, R Ji, Y Liu, et al. A novel nickel-based honeycomb electrode with microtapered holes and abundant multivacancies for highly efficient overall water splitting. Applied Catalysis B: Environmental, 2020, 276: 119141.
[29] R Ji, F Zhang, Y Liu, et al. Simple synthesis of a vacancy-rich NiO 2D/3D dendritic self-supported electrode for efficient overall water splitting. Nanoscale, 2019, 11.
[30] Q Liu, X Cao, A Du, et al. Investigation on adhesion strength and corrosion resistance of Ti-Zr aminotrimethylene phosphonic acid composite conversion coating on 7A52 aluminum alloy. Applied Surface Science, 2018, 458: 350-359.
[31] H J M Soares, O S Campos, D F Dias, et al. Chemical, morphological and corrosion characterisations of electrodeposited Ni-Fe-P coatings. Electrochimica Acta, 2018, 284: 18-23.
[32] Z Chai, C Jiang. Corrosion behavior and product film formation of Ni-Co-Cu nanocrystalline coatings in neutral salt environments. Electrochimica Acta, 2019, 298: 616-629.
[33] Z Mei, S Bhattacharya, A M Yacout. Adhesion of ZrN and Al2O3 coatings on U metal from first-principles. Applied Surface Science, 2019, 473: 121-126.
[34] D Yin, X Peng, Y Qin, et al. Quantifying adhesion energy of mechanical coatings at atomistic scale. Applied Surface Science, 2011, 258(4): 1451-1455.
Options
Outlines

/

〈 〉

　 Copyright © Chinese Journal of Mechanical Engineering, All Rights Reserved.
Powered by Beijing Magtech Co. Ltd,.