[1] G Ren, G Auger. Water film stiffness and damping analysis of water lubricated bearings with multiple axial grooves for hydro turbines. International Conference Hydro, 2016. Montreux, Switzerland, 10-12 Oct. 2016.
[2] Andreas Z. Szeri. Fluid film lubrication, theory and design. 1st ed. Cambridge: Cambridge University Press, 1998.
[3] George B DuBois, Fred W Ocvirk. Analytical derivation and experimental evaluation of short-bearing approximation for full journal bearings. NACA Report 1157.
[4] Mircea Rades. Dynamics of Machinery Ⅱ. Editura Printech, 2009: 99-102.
[5] D Childs, H Moes, H Van Leeuwen. Journal bearing impedance descriptions for rotor dynamic applications. Transactions of ASME, 1977:198.
[6] G Capone, V Agostino, D Guida. A finite length plain journal bearing theory. Transaction of ASME, 1994, 116: 648-653.
[7] R S Pai, R Pai. Stability of four-axial and six-axial grooved water-lubricated journal bearings under dynamic load. Proc. IMechE Part J: J. Engineering Tribology, 2008, 222: 683-691.
[8] G Ren. Calculation of load capacity and water film thickness for fully grooved water lubricated main guide bearings for hydro turbines. Hydro Vision Russia, Moscow, March 3-5, 2015.
[9] Lahmar Mustapha, Ellagoune Salah, Sou-Said Benyebka. Elastohydrodynamic lubrication analysis of a compliant journal bearing considering static and dynamic deformations of the bearing liner. Tribology Transactions, 2010, 53: 349-368.
[10] C Liu, B Yao, G Cao, et al. Numerical calculation of composite water lubricated bearing considering effect of elastic deformation. IOP Conf. Series: Materials Science and Engineering, 2020, 772: 012114.
[11] Edward H Smith. On the design and lubrication of water-lubricated rubber, cutlass bearings operating in the soft EHL regime. Lubricants, 2020, 8: 75.
[12] G Zhou, J Wang, Y Han, et al. Study on the stiffness and damping coefficients of water lubricated rubber bearings with multiple grooves. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2016, 230(3): 323-335.
[13] Q Li, S Zhang, L Ma, et al. Stiffness and damping coefficients for journal bearing using the 3D transient flow calculation. Journal of Mechanical Science and Technology, 2017, 31(5): 2082-2091.
[14] X Liang, X Yan, Z Liu, et al. Effect of perturbation amplitudes on water film stiffness coefficients of water-lubricated plain journal bearings based on CFD-FSI methods. Proc. IMechE Part J. Journal of Tribology, 2018: 1-13.
[15] M V S Babu, A Rama Krishna, K N S Suman. Review of journal bearing material and current trends. American Journal of Material Science and Technology, 2015, 4(2): 72-83.
[16] Y Chen, Y Sun, Q He, et al. Elastohydodynamic behavior analysis of journal bearing using fluid-structure interaction considering cavitation. Arabian Journal for Science and Engineering, 2019, 44: 1305-1320.
[17] Elsayed K Elsayed, Alaa M A EL-Butch. A study on hydrodynamic water lubricated journal bearing. Engineering Research Journal, 2017, 153: M1-M15.
[18] Saeid Dousti, Paul Allaire, Timothy Dimond, et al. An extended Reynold equation applicable to high reduced Reynolds number of journal bearings. Tribology International, 2016, 102: 182-197.
[19] R Mallya, B S Shenoy, R S Pai, et al. Stability of water lubricated bearing using linear perturbation method under turbulent conditions. Pertanika J. Science and Technology, 2017, 25(3): 995-1008.
[20] K Wu, G Zhou, X Mi, et al. Tribological and vibration properties of three different polymer material for water-lubricated bearings. Materials, 2020, 13: 3154.
[21] J Yang, Z Liu, X Liang, et al. Research on friction vibration of marine water lubricated rubber bearing. Tribology Online, Japanese Society of Tribologists, 2018, 13(3): 108-118.
[22] Wojciech Litwin. Properties comparison of rubber and three layer PTFE-NBR-Bronze water lubricated bearings with lubricating grooves along entire bush circumference based on experimental tests. Tribology International, 2015, 90: 404-411.
[23] X Ye, J Wang, D Zhang, et al. Experimental research of journal orbit for water-lubricated bearing. Mathematical Problems in Engineering, 2016, 2016: 8361596.
[24] T L Daugherty. Frictional characteristics of water-lubricated compliant surface stave bearings. ASLE, Transactions, 2008, 24(3): 293-301.
[25] C Chen, S Li, Z Lu, et al. Experimental study on material properties of bearing bush of water lubricated bearing. IOP Conf. Series: Materials Science and Engineering, 2020, 740: 012067.
[26] G C Brito Jr, R D Machado, A C Neto. Experimental estimation of journal bearing stiffness for damage detection in large hydrogenerators. Shock and Vibration, 2017: Article ID 4647868.
[27] N Wang, Q Meng, P Wang, et al. Experimental research on film pressure distribution of water-lubricated rubber bearing with multi-axial grooves. Journal of Fluids Engineering, Transactions of the ASME, 2013, 135.
[28] Wojciech Litwin. Experimental research on water lubricated three layer sliding bearing with lubrication grooves in the upper part of the bush and its comparison with a rubber bearing. Tribology International, 2015, 82: 153-161.
[29] Wojciech Litwin, Czeslaw Dymarski. Experimental research on water-lubricated marine stern tube bearings in conditions of improper lubrication and cooling causing rapid bush wear. Tribology International, 2016, 95: 449-455.
[30] T A Snyder, M J Braun. On the static and dynamic performance of compliant, water-lubricated sliding bearings; perturbed Reynolds equation vs. CFD-FSI based analysis methods. 18th EDF/Pprime Workshop, EDF Lab Paris – Saclay, October 10-11, 2019.
[31] P Varpasuo, J Ahtiainen. Modeling of water lubricated bearing in hydro unit dynamic stability. HYDRO 2019, International Conference and Exhibition, Porto, Portugal, Allandega Porto Congress Center, 14-16 October, 2019.
