1. X H Liang, M J Zuo, W H Chen. Dynamics based vibration signal modeling for tooth fault diagnosis of planetary gearboxes, Chapter 7 in:M. Demetgul, M. Ünal (Eds.), Fault Diagnosis and Detection, In Tech, 2017:175-192.
2. M R Hoseini, M J Zuo. Literature review for creating and quantifying faults in planetary gearboxes. Reliability Research Lab, Mechanical Department, University of Alberta, May 2009.
3. ASM Committee. Friction, lubrication, and wear technology. American Society for Microbiology (ASM) International, 1992.
4. L Gelman, R Zimroz, J Birkel, et al. Adaptive vibration condition monitoring technology for local tooth damage in gearboxes. Insight-Non-Destructive Testing & Condition Monitoring, 2005, 47:461-464.
5. S K Lee, J S Shim, B O Cho. Damage detection of a gear with initial pitting using the zoomed phase map of continuous wavelet transform. Key Engineering Materials, 2006, 306-308:223-228.
6. F Combet, L Gelman. Optimal filtering of gear signals for early damage detection based on the spectral kurtosis. Mechanical Systems and Signal Processing, 2009, 23:652-668.
7. H Öztürk, M Sabuncu, I Yesilyurt. Early detection of pitting damage in gears using mean frequency of scalogram. Journal of Vibration and Control, 2008, 14:469-484.
8. M R Hoseini, Y G Lei, D V Tuan, et al. Experiment design of four types of experiments:pitting experiments, run-tofailure experiments, various load and speed experiments, and crack experiments. Reliability Research Lab, Mechanical Department, University of Alberta, January 2011.
9. Z P Feng, M J Zuo. Vibration signal models for fault diagnosis of planetary gearboxes. Journal of Sound and Vibration, 2012, 331:4919-4939.
10. X H Liang, M J Zuo, T H Patel. Evaluating the time-varying mesh stiffness of a planetary gear set using the potential energy method. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 2014, 228(3):535-547.
11. X H Liang, M J Zuo, M R Hoseini. Vibration signal modeling of a planetary gear set for tooth crack detection. Engineering Failure Analysis, 2015, 48:185-200.
12. F Chaari, W Baccar, M S Abbes, et al. Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a onestage spur gear transmission. European Journal of Mechanics-A/Solids, 2008, 27:691-705.
13. Z Cheng, N Q Hu, F S Gu, et al. Pitting damage levels estimation for planetary gear sets based on model simulation and grey relational analysis. Transactions of the Canadian Society for Mechanical Engineering, 2011, 35:403-417.
14. S A Abouel-seoud, E S Dyab, M S Elmorsy. Influence of tooth pitting and cracking on gear meshing stiffness and dynamic response of wind turbine gearbox. International Journal of Science and Advanced Technology, 2012, 2:151-165.
15. A F Rincon, F Viadero, M Iglesias, et al. Effect of cracks and pitting defects on gear meshing. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 2012, 226:2805-2815.
16. H Ma, Z W Li, M J Feng, et al. Time-varying mesh stiffness calculation of spur gears with spalling defect. Engineering Failure Analysis, 2016, 66:166-176.
17. A Saxena, A Parey, M Chouksey. Time varying mesh stiffness calculation of spur gear pair considering sliding friction and spalling defects. Engineering Failure Analysis, 2016, 70:200-211.
18. X H Liang, H S Zhang, L B Liu, et al. The influence of tooth pitting on the mesh stiffness of a pair of external spur gears. Mechanism and Machine Theory, 2016, 106:1-15.
19. C K Tan, P Irving, D Mba. A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears. Mechanical Systems and Signal Processing, 2007, 21:208-233.
20. X H Liang, M J Zuo, Z P Feng. Dynamic modeling of gearbox faults:A review. Mechanical Systems and Signal Processing, 2018, 98:852-876.
21. T H Patel, A K Darpe. Experimental investigations on vibration response of misaligned rotors. Mechanical Systems and Signal Processing, 2009, 23:2236-2252.
22. T H Patel, A K Darpe. Coupled bending-torsional vibration analysis of rotor with rub and crack. Journal of Sound and Vibration, 2009, 326:740-752.
23. S Y Wu, M J Zuo, A Parey. Simulation of spur gear dynamics and estimation of fault growth. Journal of Sound and Vibration, 2008, 317:608-624.
24. X M Zhao, M J Zuo, Z L Liu. Diagnosis of pitting damage levels of planet gears based on ordinal ranking. IEEE Conference on Prognostics and Health Management (PHM), Denver, USA, June 20-23, 2011:1-8.
25. Z L Liu, J Qu, M J Zuo, et al. Fault level diagnosis for planetary gearboxes using hybrid kernel feature selection and kernel fisher discriminant analysis. The International Journal of Advanced Manufacturing Technology, 2012, 67:1217-1230.
26. X M Zhao, M J Zuo, Z L Liu, et al. Diagnosis of artificially created surface damage levels of planet gear teeth using ordinal ranking. Measurement, 2013, 46:132-144.
27. P D Samuel, D J Pines. A review of vibration-based techniques for helicopter transmission diagnostics. Journal of Sound and Vibration, 2005, 282:475-508.
28. D CH Yang, J Y Lin. Hertzian damping, tooth friction and bending elasticity in gear impact dynamics. Journal of Mechanical Design, 1987, 109:189-196.
29. X H Liang, M J Zuo, M Pandey. Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set. Mechanism and Machine Theory, 2014, 76:20-38.
30. W Bartelmus. Mathematical modelling and computer simulations as an aid to gearbox diagnostics. Mechanical Systems and Signal Processing, 2001, 15:855-871.
31. X H Tian, M J Zuo, K R Fyfe. Analysis of the vibration response of a gearbox with gear tooth faults. ASME International Mechanical Engineering Congress and Exposition, Anaheim, California, USA, November 13-20, 2004:785-793.
32. Z G Tian, M J Zuo, S Y Wu. Crack propagation assessment for spur gears using model-based analysis and simulation. Journal of Intelligent Manufacturing, 2012, 23:239-253.
33. M Amabili, A Rivola. Dynamic analysis of spur gear pairs:steady-state response and stability of the SDOF model with timevarying meshing damping. Mechanical Systems and Signal Processing, 1997, 11:375-390.
34. P Večeř, M Kreidl, R Šmíd. Condition indicators for gearbox condition monitoring systems. Acta Polytech, 2005, 45(6):35-43.
35. Z L Liu, M J Zuo, H Xu. Fault diagnosis for planetary gearboxes using multi-criterion fusion feature selection framework. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 2013, 227:2064-2076.
36. J Lin, R G Parker. Analytical characterization of the unique properties of planetary gear free vibration. Journal of Vibration and Acoustics, 1999, 121:316-321.
37. A Saxena, A Parey, M Chouksey. Dynamic analysis of multimesh geared rotor system using modal analysis. Prognostics & System Health Management Conference, Chengdu, China, Oct. 16-22, 2016:1-5.
38. X H Liang, M J Zuo, L B Liu. A windowing and mapping strategy for gear tooth fault detection of a planetary gearbox. Mechanical Systems and Signal Processing, 2016, 80:445-459.
39. S Li, A Kahraman. A spur gear mesh interface damping model based on elastohydrodynamic contact behaviour. International Journal of Powertrains, 2011, 1:4-21.
40. A S Kumar, T S Sankar, M O M Osman. On dynamic tooth load and stability of a spur-gear system using the state-space approach. Journal of Mechanism, Transmissions, and Automation in Design, 1985, 107:54-60.
41. Z P Feng, M J Zuo. Fault diagnosis of planetary gearboxes via torsional vibration signal analysis. Mechanical Systems and Signal Processing, 2013, 36:401-421.
42. Y F Li, X H Liang, M J Zuo. Diagonal slice spectrum assisted optimal scale morphological filter for rolling element bearing fault diagnosis. Mechanical Systems and Signal Processing, 2017, 85:146-161.
43. E Bechhoefer, M Kingsley. A review of time synchronous average algorithms. Annual Conference of the Prognostics and Health Management Society, San Diego, CA, September, 2009:24-33.
