Chinese Journal of Mechanical Engineering >

2022 , Vol. 35 >Issue 3: 40 - 40

DOI: https://doi.org/10.1186/s10033-022-00719-y

Special Issue on Processing of Biological Tissue

Three-dimensional Modeling and Simulation of Muscle Tissue Puncture Process

  • Zongkai Lv ,
  • Qinghua Song ,
  • Fan Gao ,
  • Zhanqiang Liu ,
  • Yi Wan ,
  • Yonghang Jiang
展开
  • 1. School of Mechanical Engineering, Shandong University, Jinan, 250061, China;
    2. Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan, 250061, China;
    3. National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;
    4. Centre for Precision Manufacturing, Department of Design, Manufacturing and Engineering Management, University of Strathclyde, Glasgow, G4 0NT, UK

收稿日期: 2021-05-16

  修回日期: 2022-03-13

  网络出版日期: 2022-10-24

基金资助

Supported by the Natural Science Foundation of Shandong Province (Grant No. ZR2019JQ19) and the interdisciplinary research project of Shandong University (Grant No. 2017JC027)

收起

Three-dimensional Modeling and Simulation of Muscle Tissue Puncture Process

  • Zongkai Lv ,
  • Qinghua Song ,
  • Fan Gao ,
  • Zhanqiang Liu ,
  • Yi Wan ,
  • Yonghang Jiang
Expand
  • 1. School of Mechanical Engineering, Shandong University, Jinan, 250061, China;
    2. Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, Shandong University, Jinan, 250061, China;
    3. National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, 250061, China;
    4. Centre for Precision Manufacturing, Department of Design, Manufacturing and Engineering Management, University of Strathclyde, Glasgow, G4 0NT, UK

Received date: 2021-05-16

  Revised date: 2022-03-13

  Online published: 2022-10-24

Supported by

Supported by the Natural Science Foundation of Shandong Province (Grant No. ZR2019JQ19) and the interdisciplinary research project of Shandong University (Grant No. 2017JC027)

Fold

摘要

Needle biopsy is an essential part of modern clinical medicine. The puncture accuracy and sampling success rate of puncture surgery can be effectively improved through virtual surgery. There are few three-dimensional puncture (3D) models, which have little significance for surgical guidance under complicated conditions and restrict the development of virtual surgery. In this paper, a 3D simulation of the muscle tissue puncture process is studied. Firstly, the mechanical properties of muscle tissue are measured. The Mooney-Rivlin (M-R) model is selected by considering the fitting accuracy and calculation speed. Subsequently, an accurate 3D dynamic puncture model is established. The failure criterion is used to define the breaking characteristics of the muscle, and the bilinear cohesion model defines the breaking process. Experiments with different puncture speeds are carried out through the built in vitro puncture platform. The experimental results are compared with the simulation results. The experimental and simulated reaction force curves are highly consistent, which verifies the accuracy of the model. Finally, the model under different parameters is studied. The simulation results of varying puncture depths and puncture speeds are analyzed. The 3D puncture model can provide more accurate model support for virtual surgery and help improve the success rate of puncture surgery.

关键词： Puncture biopsy; Muscle soft tissue; 3D Puncture Simulation

本文引用格式

Zongkai Lv , Qinghua Song , Fan Gao , Zhanqiang Liu , Yi Wan , Yonghang Jiang . Three-dimensional Modeling and Simulation of Muscle Tissue Puncture Process[J]. Chinese Journal of Mechanical Engineering, 2022 , 35(3) : 40 -40 . DOI: 10.1186/s10033-022-00719-y

Abstract

Needle biopsy is an essential part of modern clinical medicine. The puncture accuracy and sampling success rate of puncture surgery can be effectively improved through virtual surgery. There are few three-dimensional puncture (3D) models, which have little significance for surgical guidance under complicated conditions and restrict the development of virtual surgery. In this paper, a 3D simulation of the muscle tissue puncture process is studied. Firstly, the mechanical properties of muscle tissue are measured. The Mooney-Rivlin (M-R) model is selected by considering the fitting accuracy and calculation speed. Subsequently, an accurate 3D dynamic puncture model is established. The failure criterion is used to define the breaking characteristics of the muscle, and the bilinear cohesion model defines the breaking process. Experiments with different puncture speeds are carried out through the built in vitro puncture platform. The experimental results are compared with the simulation results. The experimental and simulated reaction force curves are highly consistent, which verifies the accuracy of the model. Finally, the model under different parameters is studied. The simulation results of varying puncture depths and puncture speeds are analyzed. The 3D puncture model can provide more accurate model support for virtual surgery and help improve the success rate of puncture surgery.

Key words： Puncture biopsy; Muscle soft tissue; 3D Puncture Simulation

参考文献

[1] G Gandaglia, K R Ghani, A Sood, et al. Effect of minimally invasive surgery on the risk for surgical site infections: results from the National Surgical Quality Improvement Program (NSQIP) Database. Jama Surgery, 2016, 149(10): 1039.
[2] N Hansen-Algenstaedt, M K Kwan, P Algenstaedt, et al. Comparison between minimally invasive surgery and conventional open surgery for patients with spinal metastasis: A prospective propensity score-matched study. Spine, 2017, 42(10): 789-797.
[3] G Dieberg, N A Smart, N King. Minimally invasive cardiac surgery: A systematic review and meta-analysis. International Journal of Cardiology, 2016, 223: 554-560.
[4] K Malukhin, K Ehmann. Mathematical modeling and virtual reality simulation of surgical tool interactions with soft tissue: A review and prospective. Journal of Engineering and Science in Medical Diagnostics and Therapy, 2018, 1(2): 020802.
[5] Y H Xiang, D M Zhong, S Rudykh, et al. A review of physically-based and thermodynamically-based constitutive models for soft materials. Journal of Applied Mechanics, 2020: 1-47.
[6] F Gao, Q H Song, Y H Jiang, et al. Influence of a biocompatible hydrophilic needle surface coating on a puncture biopsy process for biomedical applications. Coatings, 2020, 10(2): 178.
[7] M Eto, H Tsukihara, E Kobayashi, et al. In-vivo and in-vitro mechanical properties of pig liver during needle puncture for needle insertion. 2019 IEEE 1st Global Conference on Life Sciences and Technologies (Life Tech), Osaka, Japan, March 12-14, 2019.
[8] K I Jerg, René Phillip Austermühl, K Roth, et al. Diffuse domain method for needle insertion simulations. International Journal for Numerical Methods in Biomedical Engineering, 2020, 36(9): 1-18.
[9] D Q Wang, Q H Song, Z Q Liu, et al. Cutting characteristics of porcine tenderloin tissue along tangential direction of surface. International Journal of Advanced Manufacturing Technology, 2017, 98(5): 1-11.
[10] Y H Jiang, Q H Song, F Gao, et al. Needle deformation in the process of puncture surgery: experiment and simulation. Proceedings of the 4th CIRP Conference on BioManufacturing 2019, Guangdong, China, December 12-15, 2020: 270-276.
[11] L Xu, B L Zhao, L Lei, et al. Needle deflection modeling and verification during insertion into soft tissue. 2019 IEEE International Conference on Cyborg and Bionic Systems (CBS), Munich, Germany, September 18-20, 2019.
[12] J Z Dong, Z Y Tan, X M Jiang, et al. Optimizing of puncture steely needlepoint morphology during the stage of fiber bending and elongation needles. Journal of Harbin Engineering University, 2019, 40(2): 387-392.
[13] D D Gao, Y Lei, B Yao. Dynamic soft tissue deformation estimation based on energy analysis. Chinese Journal of Mechanical Engineering, 2016, 29(6): 1167-1175.
[14] W Y Liu, Z Y Yang, P Li, et al. Mechanics of tissue rupture during needle insertion in transverse isotropic soft tissue. Medical and Biological Engineering and Computing, 2019, 57(6): 1353-1366.
[15] M Gzaiel, E Triki, A Barkaoui, et al. Finite element study of mixed fracture: velocity-dependent insertion of pointed blades into soft material. International Journal of Applied Mechanics, 2020, 13(1): 2150003.1-2150003.19.
[16] M Gzaiel, E Triki, A Barkaoui. Finite element modeling of the puncture-cutting response of soft material by a pointed blade. Mechanics of Materials, 2019, 136(Sep.): 103082.1-103082.10.
[17] M G Jushiddi, J J Mulvihill, D Chovan, et al. Simulation of biopsy bevel-tipped needle insertion into soft-gel. Computers in biology and medicine, 2019, 111: 103337.
[18] W Liu, Z Yang, S Jiang. A mechanics-based model for simulating the needle deflection in transverse isotropic tissue for a percutaneous puncture. Journal of Mechanics in Medicine and Biology, 2019, 19(06): 1950060.
[19] X R Zhang, J D Duan, Z L Kavan, et al. A virtual puncture surgery system based on multi-layer soft tissue and force mesh. Computers, Materials and Continua, 2018, 57(3): 505-519.
[20] L H Wang, D G Gao, J J Fu, et al. Simulation of coupling process of flexible needle insertion into soft tissue based on ABAQUS. Computers, Materials and Continua, 2020, 64(2): 1153-1169.
[21] Y T Cui, Y S Li, J Han, et al. Simulation of liver puncture deformation model based on improved mass-spring model. Chinese Journal of Stereology and Image Analysis, 2018, 23(4): 426-435.
[22] Y D Zhang, K M Shi, Y J Zhao, et al. Study on force modeling and measurement method of soft tissue puncture with oblique tip flexible needle. Chinese Journal of Scientific Instrument, 2018, 39(6): 164-172. (in Chinese)
[23] C L Lin, G J Lan. A computational approach to investigate optimal cutting speed configurations in rotational needle biopsy cutting soft tissue. Computer Methods in Biomechanics and Biomedical Engineering, 2019, 22(1-4): 84-93.
[24] A Wittek, G Bourantas, B F Zwick, et al. Mathematical modeling and computer simulation of needle insertion into soft tissue. Public Library of Science, 2020, 15(12): 1-31.
[25] H Xiao. Explore the application of MLESAC algorithm in needle puncture surgery. China Computer & Communication, 2019 (11): 26-28.
[26] Y Adagolodjo, L Goffin, M D Mathelin, et al. Robotic insertion of flexible needle in deformable structures using inverse finite-element simulation. IEEE Transactions on Robotics, 2019, 35(3): 697-708.
[27] N V Datla, B Konh, M Honarvar, et al. A model to predict deflection of bevel-tipped active needle advancing in soft tissue. Medical Engineering & Physics, 2014, 36(3): 285-293.
[28] M J Oldfield, A Leibinger, T E T Seah, et al. Method to reduce target motion through needle-tissue interactions. Annals of Biomedical Engineering, 2015, 43(11): 2794-2803.
[29] X J Wang, J Shan. Study of the targeting error for percutaneous needle insertion into soft phantom material. Journal of Mechanics in Medicine & Biology, 2016, 16(2): 413-431.
[30] G Chagnon, M Rebouah, D Favier. Hyperelastic energy densities for soft biological tissues: A review. Journal of Elasticity, 2015, 120(2): 129-160.
Options
文章导航

/

〈 〉

版权所有 © 《Chinese Journal of Mechanical Engineering》编辑部

技术支持：北京玛格泰克科技发展有限公司