[1] J Wei, A Q Zhang, L Shi, et al. Modeling and dynamic characteristics of planetary gear transmission in non-inertial system of aerospace environment. Journal of Mechanical Design, 2019, 142(3): 1–16.
[2] Y Qin, J Q Zou, B P Tang, et al. Transient feature extraction by the improved orthogonal matching pursuit and K-SVD algorithm with adaptive transient dictionary. IEEE Transactions on Industrial Informatics, 2019: 99.
[3] S Y Liu, C S Song, C C Zhu, et al. Investigation on the influence of work holding equipment errors on contact characteristics of face-hobbed hypoid gear. Mechanism and Machine Theory, 2019, 138: 95–111.
[4] Z G Chen, W M Zhai, K Y Wang. Vibration feature evolution of locomotive with tooth root crack propagation of gear transmission system. Mechanical Systems and Signal Processing, 2019, 115: 29–44.
[5] S Mo, T Zhang. Analytical investigation on load sharing characteristics of herringbone planetary gear train with flexible support and floating sun gear. Mechanism and Machine Theory, 2020, 144(2): 1–27.
[6] V Sahoo, R Maiti. Load sharing by tooth pairs in involute toothed harmonic drive with conventional wave generator cam. Meccanica, 2017, 53(1): 1–22.
[7] M Y S Member, M I S Member, H H S Member, et al. Modeling and compensation for angular transmission error in harmonic drive gearings. IEEJ Transactions on Electrical and Electronic Engineering, 2010, 4(2): 158–165.
[8] X X Chen, Y S Liu, J Z Xing, et al. The parametric design of double-circular-arc tooth profile and its influence on the functional backlash of harmonic drive. Mechanism and Machine Theory, 2014, 73: 1–24.
[9] R Dhaouadi, F H Ghorbel. Modelling and analysis of nonlinear stiffness, hysteresis and friction in harmonic drive gears. International Journal of Modelling and Simulation, 2008, 28(3): 329–336.
[10] X X Chen, S Z Lin, J Z Xing. Modeling of flexspline and contact analyses of harmonic drive. Key Engineering Materials, 2009, 419–420: 597–600.
[11] W D He, Z B Jiang, J H Bao, et al. Crank shaft modal analysis of RV reducer. Journal of Dalian Jiaotong University, 2011, 32(2): 28–32. (in Chinese)
[12] Y H Zhang, X Y Wang, W D He, et al. The precise measurement technology for manufacturing error of cycloidal gear used in RV reducer. Applied Mechanics and Materials, 2017, 868: 334–339.
[13] H Yu, G Liu, Y Wang, et al. The impact of gap on meshing force in two-stage cycloidal gear drive. 2017 IEEE International Conference on Information and Automation (ICIA), 18–20 July 2017, Macao, China: IEEE, 2017: 760–763.
[14] X X Sun, L Han, K Ma, et al. Lost motion analysis of CBR reducer. Mechanism and Machine Theory, 2018, 120: 89–106.
[15] J F Wu, X C Zhu, W Gao, et al. The dynamics analysis of rolling movable teeth reducer. Advanced Materials Research, 2011, 221: 429–435.
[16] Y F Wang, L N Liu, B Yang. Virtual prototype modeling and dynamical simulation of swing movable teeth reducer. Advanced Materials Research, 2011: 531–534.
[17] S M Liang, W Luo, J G Xu, et al. Modal analysis of swing movable teeth reducer by using finite element method. Journal of Sichuan University (Engineering Science Edition), 2004, 36(2): 77–80. (in Chinese)
[18] Y Song, Q Liao, S Wei, et al. A novel approach to design a pure rolling cycloid reducer with involute teeth superimposed. 2012 Proceedings of International Conference on Modelling, Identification and Control, 24–26 June 2012, Wuhan, China: IEEE, 2012: 998–1003.
[19] J F Li, L Y Zhou, X R Dong. The influence of configuration parameters on contact ratio and teeth profile character of cam shock wave rolling movable teeth transmission. Journal of Beijing University of Technology, 2009, 35(8): 1021–1020. (in Chinese)
[20] Y L Yi, Z J An. Research on digital design and manufacture technology of rolling swing movable teeth transmission. Applied Mechanics and Materials, 2011, 86: 370–373.
[21] B Routh. Design aspects of harmonic drive gear and performance improvement of its by problems identification: A review. AIP conference proceedings, 2018: 020016.
[22] A D Pham, H J Ahn. High precision reducers for industrial robots driving 4th industrial revolution: state of arts, analysis, design, performance evaluation and perspective. International Journal of Precision Engineering and Manufacturing-Green Technology, 2018, 5(4): 519–533.
[23] P L Garcia, S Crispel, E Saerens, et al. Compact Gearboxes for Modern Robotics: A Review. Frontiers in Robotics and AI, 2020, 7: 103.
[24] X Z Li, C C Song, Y Yang, et al. Optimal design of wave generator profile for harmonic gear drive using support function. Mechanism and machine theory, 2020, 152: 103941.
[25] G D Jiang, S Wang, X S M, et al. Bidirectional conjugate design method of double-circular–arc tooth profile of harmonic drives. Journal of Xi'an Jiaotong University, 2019, 53(8): 8–14. (in Chinese)
[26] Y B He, S M Liang, Y Yang. Contact mechanics of two-tooth-difference oscillating-disc movable teeth transmission. Journal of Central South University (Science and Technology), 2020, 51(1): 49–58.
[27] J A Yang, L Z Xu. Efficiency calculation and test for a two-step sine movable tooth transmission. China Mechanical Engineering, 2019, 30(21): 2577–2582, 2589. (in Chinese)
[28] F L Cao, X F Shi, L Z Xu. Stress analysis of micro movable teeth transmission systems considering van der Waals forces. China Mechanical Engineering, 2019, 30(7): 831–839. (in Chinese)
[29] J F Li, H W Zhao, L Y Zhang, et al. Transmission and tooth profile equation of swing output movable teeth cam mechanism. Journal of Mechanical Engineering, 2018, 54(23): 23–31. (in Chinese)
[30] Y L Yi, P P Liu, Z J An, et al. Tooth profile design and meshing characteristics analysis of any tooth-difference pure rolling movable tooth transmission. Journal of Mechanical Engineering, 2016, 52(11): 50–56. (in Chinese)
[31] J F Li, X R Dong. Method of meshing force analysis for the movable rolling teeth transmission with cam actuating. Journal of Mechanical Engineering, 2008(05): 39–44. (in Chinese)
