[1] A Pimpin, W Srituravanich. Review on micro- and nanolithography techniques and their applications. Engineering Journal, 2012, 16(1): 37-56.
[2] H Phan, T Nguyen, T Dinh, et al. Robust free-standing nano-thin sic membranes enable direct photolithography for MEMS sensing applications. Advanced Engineering Materials, 2018, 20(1): 1700858.
[3] D Qin, Y Xia, G M Whitesides. Soft lithography for micro- and nanoscale patterning. Nature Protocols, 2010, 5: 491-502.
[4] S Y Chou, C Keimel, J Gu. Ultrafast and direct imprint of nanostructures in silicon. Nature, 2002, 417(6891): 835-837.
[5] J Deng, J Yan, J Shao, et al. Electron beam lithography on uneven resist for uniform Bragg gratings in Ga-Sb based distributed-feedback laser. Microelectronic Engineering, 2018, 195: 32-35.
[6] L D Menard, J M Ramsey. Fabrication of sub-5 nm nanochannels in insulating substrates using focused ion beam milling. Nano Letters, 2011, 11: 512-517.
[7] Y Xu, N Matsumoto. Flexible and in situ fabrication of nanochannels with high aspect ratios and nanopillar arrays in fused silica substrates utilizing focused ion beam. RSC Advances, 2015, 5: 50638-50643.
[8] Y K Ryu Cho, C D Rawlings, H Wolf, et al. Sub-10 nanometer feature size in silicon using thermal scanning probe lithography. ACS Nano, 2017, 11(26): 11890-11897.
[9] S Chen, S Kim, W Chen, et al. Monolayer MoS2 nanoribbon transistors fabricated by scanning probe lithography. Nano Letters, 2019, 19(3): 2092-2098.
[10] Y Wang, X Hong, J Zeng, et al. AFM tip hammering nanolithography. Small, 2009, 5(4): 477-483.
[11] G Binnig, H Rohrer, Ch Gerber, et al. Surface studies by scanning tunneling microscopy. Physical Review Letters, 1982, 49(1): 31-35.
[12] A A Tseng. Tip-based nanofabrication: fundamentals and applications. Phoenix: Arizona State University, 2011.
[13] A P Malshe, K P Rajurkar, K R Virwani, et al. Tip-based nanomanufacturing by electrical, chemical, mechanical and thermal processes. CIRP Annals - Manufacturing Technology, 2010, 59(2): 628-651.
[14] D M Eigler, E K Schweizer. Positioning single atoms with a scanning tunneling microscope. Nature, 1990, 344(6266): 524-526.
[15] F J Giessibl, C F Quate. Exploring the nanoworld with atomic force microscopy. Physics Today, 2006, 59(12): 44-50.
[16] Y Sugimoto, M Abe, S Hirayama, et al. Atom inlays performed at room temperature using atomic force microscopy. Nature Materials, 2005, 4(2): 156-159.
[17] O Custance, R Perez, S Morita. Atomic force microscopy as a tool for atom manipulation. Nature Nanotechnology, 2009, 4(12): 803-810.
[18] H C Manoharan, C P Lutz, D M Eigler. Quantum mirages formed by coherent projection of electronic structure. Nature, 2000, 403(6769): 512-515.
[19] D Stiévenard, B Legrand. Silicon surface nano-oxidation using scanning probe microscopy. Progress in Surface Science, 2006, 81(2): 112-140.
[20] G Guo, J Li, C Deng, et al. Nondestructive nanofabrication on monocrystalline silicon via site-controlled formation and removal of oxide mask. Applied Physics Express, 2018, 11(11): 116501.
[21] Y Li, B W Maynor, J Liu. Electrochemical AFM "Dip-Pen" nanolithography. Journal of the American Chemical Society, 2001, 123(9): 2105-2106
[22] R D Piner, J Zhu, F Xu, et al. "Dip-Pen" nanolithography. Science, 1999, 283(5402): 661-663.
[23] D Pires, J L Hedrick, A D Silva, et al. Nanoscale three-dimensional patterning of molecular resists by scanning probes. Science, 2010, 328(5979): 732-735.
[24] B Yu, H Dong, L Qian, et al. Friction-induced nanofabrication on monocrystalline silicon. Nanotechnology, 2009, 20(46): 465303.
[25] B Yu, L Qian, H Dong, et al. Friction-induced hillocks on monocrystalline silicon in atmosphere and in vacuum. Wear, 2010, 268(9): 1095-1102.
[26] B Yu, X Li, H Dong, et al. Towards a deeper understanding of the formation of friction-induced hillocks on monocrystalline silicon. Journal of Physics D: Applied Physics, 2012, 45(14): 145301.
[27] J Guo, C Song, X Li, et al. Fabrication mechanism of friction-induced selective etching on Si (100) surface. Nanoscale Research Letters, 2012, 7(1): 152.
[28] Y D Yan, Z J Hu, X S Zhao, et al. Top-down nanomechanical machining of three-dimensional nanostructures by atomic force microscopy. Small, 2010, 6(6): 724-728.
[29] J Deng, J Y Dong, Paul Cohen. High rate 3D nanofabrication by AFM-based ultrasonic vibration assisted nanomachining. Procedia Manufacturing, 2016, 5: 1283-1294.
[30] U Kunze. Nanoscale devices fabricated by dynamic ploughing with an atomic force microscope. Superlattices and Microstructures, 2002, 31(1): 3-17.
[31] Y He, Y D Yan, Y Q Geng, et al. Fabrication of periodic nanostructures using dynamic plowing lithography with the tip of an atomic force microscope. Applied Surface Science, 2018, 427: 1076-1083.
[32] B Vasic, M Kratzer, A Matkovic, et al. Atomic force microscopy based manipulation of graphene using dynamic plowing lithography. Nanotechnology, 2013, 24: 015303.
[33] R Kaneko, T Miyamoto, Y Andoh, et al. Microwear. Thin Solid Films, 1996, 273(1): 105-111.
[34] E Hamada, R Kaneko. Micro-distortion of polymer surfaces by friction. Journal of Physical D: Applied Physics, 1992, 25: A53.
[35] R Kaneko, E Hamada. Microwear processes of polymer surfaces. Wear, 1993, 162-164: 370-377.
[36] J Yu, L Qian, B Yu, et al. Nanofretting behaviors of monocrystalline silicon (100) against diamond tips in atmosphere and vacuum. Wear, 2009, 267(1): 322-329.
[37] T Fang, C Weng, J Chang. Machining characterization of the nano-lithography process using atomic force microscopy. Nanotechnology, 2000, 11(3): 181-187.
[38] Y Q Wu, H Huang, J Zou, et al. Nanoscratch-induced phase transformation of monocrystalline Si. Scripta Materialia, 2010, 63(8): 847-850.
[39] K L Johnson. Contact mechanics. Cambridge: Cambridge University Press, 1985.
[40] L Qian, M Li, Z Zhou, et al. Comparison of nano-indentation hardness and micro hardness. Surface & Coatings Technology, 2005, 195(2): 264-271.
[41] F Ebrahimi, L Kalwani. Fracture anisotropy in silicon single crystal. Materials Science and Engineering A-structural Materials Properties Microstructure and Processing, 1999, 268(1): 116-126.
[42] B Bhushan. Nano to microscale wear and mechanical characterization using scanning probe microscopy. Wear, 2001, 251(1): 1105-1123.
[43] B Yu, L Qian. Effect of crystal plane orientation on the friction-induced nanofabrication on monocrystalline silicon. Nanoscale Research Letters, 2013, 8(1): 137.
[44] P J Hesketh, C Ju, S Gowda, et al. Surface free energy model of silicon anisotropic etching. Journal of the Electrochemical Society, 1993, 140(4): 1080-1085.
[45] P Stempflé, J Takadoum. Multi-asperity nanotribological behavior of single-crystal silicon: crystallography-induced anisotropy in friction and wear. Tribology International, 2012, 48: 35-43.
[46] M C Elwenspoek. On the mechanism of anisotropic etching of silicon. Journal of the Electrochemical Society, 1993, 140(7): 2075-2080.
[47] B Yu. Study on the formation, mechanism and application of friction-induced hillock on monocrystalline silicon. Chengdu: Southwest Jiaotong University, 2012. (in Chinese)
[48] B Yu, X Li, H Dong, et al. Mechanical performance of friction-induced protrusive nanostructures on monocrystalline silicon and quartz. Micro & Nano Letters, 2012, 7(12): 1270-1273.
[49] N Satyanarayana, S K Sinha. Tribology of PFPE overcoated self-assembled monolayers deposited on Si surface. Journal of Physics D: Applied Physics, 2005, 38: 3512-3522.
[50] R Kaneko, S Umemura, M Hirana, et al. Recent progress in microtribology. Wear, 1996, 200(1): 296-304.
[51] S Miyake, J Kim. Fabrication of silicon utilizing mechanochemical local oxidation by diamond tip sliding. Japanese Journal of Applied Physics, 2001, 40(11): 1247-1249.
[52] S Miyake, J Kim. Nanoprocessing of silicon by mechanochemical reaction using atomic force microscopy and additional potassium hydroxide solution etching. Nanotechnology, 2005, 16(1): 149-157.
[53] N Kawasegi, N Morita, S Yamada, et al. Etch stop of silicon surface induced by tribo-nanolithography. Nanotechnology, 2005, 16(8): 1411-1414.
[54] K Chung, Y Lee, D Kim. Characteristics of fracture during the approach process and wear mechanism of silicon AFM tip. Ultramicroscopy, 2005, 102(2): 161-171.
[55] S Miyake, M Wang, J Kim. Silicon nanofabrication by atomic force microscopy-based mechanical processing. Journal of Nanotechnology, 2014: 1-19.
[56] S W Youn, C G Kang. Effect of nanoscratch conditions on both deformation behavior and wet-etching characeristics of silicon (100) surface. Wear, 2006, 261(3): 328-337.
[57] I Zarudi, W C D Cheong, J Zou, et al. Atomistic structure of monocrystalline silicon in surface nano-modification. Nanotechnology, 2004, 15(1): 104-107.
[58] A Rota, E Serpini, G C Gazzadi, et al. AFM-based tribological study of nanopatterned surfaces: the influence of contact area instabilities. Journal of Physics: Condensed Matter, 2016, 28(13): 134008.
[59] J W Park, S S Lee, B S So, et al. Characteristics of mask layer on (100) silicon induced by tribo-nanolithography with diamond tip cantilevers based on AFM. Journal of Materials Processing Technology, 2007, 187: 321-325.
[60] I Sung, D Kim. Nano-scale patterning by mechano-chemical scanning probe lithography. Applied Surface Science, 2005, 239: 209-221.
[61] J W Park, N Kawasegi, N Morita. Tribonanolithography of silicon in aqueous solution based on atomic force microscopy. Applied Physics Letters, 2004, 85: 1766-1768.
[62] N Kawasegi, N Morita. High-aspect-ratio structure fabrication on (110)-oriented silicon surfaces using tribo-nanolithography. Journal of Nanoscience and Nanotechnology, 2010, 10: 2394-2400.
[63] J W Park, N Kawasegi, N Morita, et al. Mechanical approach to nanomachining of silicon using oxide characteristics based on tribo nanolithography (TNL) in KOH solution. Journal of Manufacturing Science and Engineering, 2004, 126(4): 801-806.
[64] Y Q Wu, H Huang, J Zou, et al. Nanoscratch-induced deformation of single crystal silicon. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2009, 27(3): 1374-1377.
[65] H Seidel, L Csepregi, A Heuberger, et al. Anisotropic etching of crystalline silicon in alkaline solutions. Journal of the Electrochemical Society, 1990, 137(11): 3612-3626.
[66] DK Biegelsen, M Stutzmann. Hyperfine studies of dangling bonds in amorphous silicon. Physical Review B, 1986, 33(5): 3006-3011.
[67] C Zhou, J Li, L Wu, et al. Friction-induced selective etching on silicon by TMAH solution. RSC advances, 2018, 8(63): 36043-36048.
[68] C Y Chen, C P Wong. Unveiling the shape-diversified silicon nanowires made by HF/HNO3, isotropic etching with the assistance of silver. Nanoscale, 2015, 7(3): 1216-1223.
[69] H Wang, C Deng, C Xiao, et al. Fast and maskless nanofabrication for high-quality nanochannel. Sensors and Actuators B: Chemical, 2019, 288: 383-391.
[70] L Wu, B Yu, P Zhang, et al. Rapid identification of ultrathin amorphous damage on monocrystalline silicon surface. PhysicalChemistry Chemical Physics, 2020, 22: 12987-12995.
[71] C Jin, B Yu, C Xiao, et al. Temperature-dependent nanofabrication on silicon by friction-induced selective etching. Nanoscale Research Letters, 2016, 11(1): 229.
[72] C Jin, B Yu, X Liu, et al. Site-controlled fabrication of silicon nanotips by indentation-induced selective etching. Applied Surface Science, 2017, 425: 227-232.
[73] L Wu, B Yu, Z Fan, et al. Effects of normal load and etching time on current evolution of scratched GaAs surface during selective etching. Materials Science in Semiconductor Processing, 2020, 105: 104744.
[74] J Guo, C Xiao, B Peng, et al. Tribochemistry-induced direct fabrication of nondestructive nanochannels on silicon surface. RSC Advances, 2015, 5(122): 100769-100774.
[75] J Guo, B Yu, L Chen, et al. Nondestructive nanofabrication on Si (100) surface by tribochemistry-induced selective etching. Scientific Reports, 2015, 5: 16472.
[76] H Wang, B Yu, S Jiang, et al. UV/ozone-assisted tribochemistry-induced nanofabrication on Si (100) surfaces. RSC Advances, 2017, 7(63): 39651-39656.
[77] E Yilgor, O Kaymakci, M Isik, et al. Effect of UV/ozone irradiation on the surface properties of electrospun webs and films prepared from polydimethylsiloxane-urea copolymers. Applied Surface Science, 2012, 258(10): 4246-4253.
[78] X Liu, B Yu, Y Zou, et al. Revealing silicon crystal defects by conductive atomic force microscope. Applied Physics Letters, 2018, 113: 101601.
[79] J Guo, B Yu, X Wang, et al. Nanofabrication on monocrystalline silicon through friction-induced selective etching of Si3N4 mask. Nanoscale Research Letters, 2014, 9(1): 241.
[80] C Song, X Li, S Cui, et al. Maskless and low-destructive nanofabrication on quartz by friction-induced selective etching. Nanoscale Research Letters, 2013, 8(1): 140.
[81] C Song, B Yu, L Qian. Effect of scan parameters and etching temperature on low-destructive nanofabrication of quartz. Micro & Nano Letters, 2013, 8(10): 735-739.
[82] P Tang, B Yu, J Guo, et al. Maskless micro/nanofabrication on GaAs surface by friction-induced selective etching. Nanoscale Research Letters, 2014, 9(1): 59.
[83] P S Pizani, F Lanciotti, R G Jasinevicius, et al. Raman characterization of structural disorder and residual strains in micromachined GaAs. Journal of Applied Physics, 2000, 87(3): 1280.
[84] C Song, B Yu, M Wang, et al. Rapid and maskless nanopatterning of aluminosilicate glass surface via friction-induced selective etching in HF solution. RSC Advances, 2015, 5(97): 79964-79968.
[85] Y F Niu, K Han, J P Guin. Locally enhanced dissolution rate as a probe for nanocontact-induced densification in oxide glasses. Langmuir, 2012, 28(29): 10733-10740.
[86] C Iliescu, F E H Tay, J Miao. Strategies in deep wet etching of Pyrex glass. Sensors & Actuators A Physical, 2007, 133(2): 395-400.
[87] L Wu, Z Fan, Y Peng, et al. Rapid nanofabrication via UV-assisted selective etching on GaAs without templates. Chemical Physics Letters, 2019, 717: 152-157.
[88] J V D Ven, H J P Nabben. Analysis of determining factors in the kinetics of anisotropic photoetching of GaAs. Journal of Applied Physics, 1990, 67: 7572-7575.
[89] Y Peng, S Jiang, Y Tan, et al. The formation mechanism of nondefective silicon micropatterns fabricated by scratching assisted electrochemical Etching. ECS Journal of Solid State Science and Technology, 2019, 8(9): 464-471.
[90] V Lehmann, S Ronnebeck. The physics of macropore formation in low-doped p-type silicon. Journal of the Electrochemical Society, 1999, 146(8): 2968-2975.
[91] V Lehmann, H Foll. Formation mechanism and properties of electrochemically etched trenches in n-type silicon. Journal of the Electrochemical Society, 1990, 137(2): 653-659.
[92] Q Tang, H Shen, H Yao, et al. Formation mechanism of inverted pyramid from sub-micro to micro scale on c-Si surface by metal assisted chemical etching temperature. Applied Surface Science, 2018, 455: 283-294.
[93] L Wu, P Zhang, C Feng, et al. Scanning probe-based nanolithography: nondestructive structures fabricated on silicon surface via distinctive anisotropic etching in HF/HNO3 mixtures. Journal of Materials Science, 2021, 56: 3887-3899.
[94] Z Wu, C Song, J Guo, et al. A multi-probe micro-fabrication apparatus based on the friction-induced fabrication method. Frontiers of Mechanical Engineering, 2013, 8(4): 333-339.
[95] J Chen, J Liu, B Yu, et al. Preparation of multi-tip arrays on flexible substrates for large-scale microfabrication. Micro & Nano Letters, 2017, 12(2): 104-108.
[96] H Wang, B Yu, S Jiang, et al. Simple and low-cost nanofabrication process of nanoimprint templates for high-quality master gratings: Friction-induced selective etching. Applied Surface Science, 2018, 454: 23-29.
[97] Y Peng, S Jiang, L Xia, et al. Direct ink writing combined with metal-assisted chemical etching of microchannels for the microfluidic system applications. Sensors and Actuators A: Physical, 2020, 315: 112320.
[98] R B Schoch, J Han, P Renaud. Transport phenomena in nanofluidics. Reviews of Modern Physics, 2008, 80(3): 839-883.
[99] C Chang, A Sakdinawat. Ultra-high aspect ratio high-resolution nanofabrication for hard X-ray diffractive optics. Nature Communications, 2014, 5(1): 1-7.
