Review

Research and Development of Electro-hydraulic Control Valves Oriented to Industry 4.0: A Review

  • Bing Xu ,
  • Jun Shen ,
  • Shihao Liu ,
  • Qi Su ,
  • Junhui Zhang
展开
  • State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China

收稿日期: 2019-12-04

  修回日期: 2020-03-20

  网络出版日期: 2020-06-17

基金资助

Supported by NSFC-Zhejiang Joint Fund (Grant No. U1509204), and National Natural Science Foundation of China (Grant Nos. 51835009, 51922093)

Research and Development of Electro-hydraulic Control Valves Oriented to Industry 4.0: A Review

  • Bing Xu ,
  • Jun Shen ,
  • Shihao Liu ,
  • Qi Su ,
  • Junhui Zhang
Expand
  • State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China

Received date: 2019-12-04

  Revised date: 2020-03-20

  Online published: 2020-06-17

Supported by

Supported by NSFC-Zhejiang Joint Fund (Grant No. U1509204), and National Natural Science Foundation of China (Grant Nos. 51835009, 51922093)

摘要

Electro-hydraulic control valves are key hydraulic components for industrial applications and aerospace, which controls electro-hydraulic motion. With the development of automation, digital technology, and communication technology, electro-hydraulic control valves are becoming more digital, integrated, and intelligent in order to meet the requirements of Industry 4.0. This paper reviews the state of the art development for electro-hydraulic control valves and their related technologies. This review paper considers three aspects of state acquisition through sensors or indirect acquisition technologies, control strategies along with digital controllers and novel valves, and online maintenance through data interaction and fault diagnosis. The main features and development trends of electro-hydraulic control valves oriented to Industry 4.0 are discussed.

本文引用格式

Bing Xu , Jun Shen , Shihao Liu , Qi Su , Junhui Zhang . Research and Development of Electro-hydraulic Control Valves Oriented to Industry 4.0: A Review[J]. Chinese Journal of Mechanical Engineering, 2020 , 33(2) : 29 -29 . DOI: 10.1186/s10033-020-00446-2

Abstract

Electro-hydraulic control valves are key hydraulic components for industrial applications and aerospace, which controls electro-hydraulic motion. With the development of automation, digital technology, and communication technology, electro-hydraulic control valves are becoming more digital, integrated, and intelligent in order to meet the requirements of Industry 4.0. This paper reviews the state of the art development for electro-hydraulic control valves and their related technologies. This review paper considers three aspects of state acquisition through sensors or indirect acquisition technologies, control strategies along with digital controllers and novel valves, and online maintenance through data interaction and fault diagnosis. The main features and development trends of electro-hydraulic control valves oriented to Industry 4.0 are discussed.

参考文献

[1] H Kagermann, W Lukas, W Wahlster. Industrie 4.0: Mit dem Internet der Dinge auf dem Weg zur 4. industriellen Revolution. VDI Nachrichten, 2011, 13(11): 2.
[2] M F Rahman, N C Cheung, K W Lim. Position estimation in solenoid actuators. IEEE Transactions on Industry Applications, 1996, 32(3): 552-559.
[3] A C Yudell, J D Van de Ven. Predicting solenoid valve spool displacement through current analysis. International Journal of Fluid Power, Taylor & Francis, 2015, 16(3): 133-140.
[4] P Proost. Sensorless position estimation on a proportional electrically adjustable hydraulic valve. Ghent: Ghent University, 2015.
[5] T Braun, J Reuter, J Rudolph. Position observation for proportional solenoid valves by signal injection. IFAC-PapersOnLine, 2016, 49(21): 74-79.
[6] T Kramer, J Weber, G Pflug, et al. Smart realisation of energy savings during switching operation at bi-stable process valves. Actuator 2018; 16th International Conference on New Actuators, 2018: 1-4.
[7] H E Merritt. Hydraulic control systems. John Wiley & Sons, 1991.
[8] D Wu, R Burton, G Schoenau. An empirical discharge coefficient model for orifice flow. International Journal of Fluid Power, 2002, 3(3): 13-19.
[9] D Wu, R Burton, G Schoenau, et al. Modelling of orifice flow rate at very small openings. International Journal of Fluid Power, 2003, 4(1): 31-39.
[10] J Dobchuk, R Burton, P Nikiforuk. A modified turbulent orifice equation approach for modelling valves of unknown configuration. International Journal of Fluid Power, 2007, 8(3): 25-30.
[11] J R Valdes, J M Rodriguez, J Saumell, et al. A methodology for the parametric modelling of the flow coefficients and flow rate in hydraulic valves. Energy Conversion and Management, 2014, 88: 598-611.
[12] S Dimitrov, S Simeonov, S Cvetkov. Static characteristics of the orifices in a pilot operated pressure relief valve. Hydraulica, Magazine of Hydraulics, Pneumatics, Tribology, Ecology, Sensorics, Mechatronics, 2015(2/2015): 34-38.
[13] J Das, S K Mishra, R Paswan, et al. Characterization and tracking control of a nonlinear electrohydraulic valve-cylinder system. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2016, 230(5): 371-384.
[14] M Borghi, M Milani, R Paoluzzi. Influence of notch shape and number of notches on the metering characteristics of hydraulic spool valves. International Journal of Fluid Power, 2005, 6(2): 5-18.
[15] R Åman, H Handroos, T Eskola. Computationally efficient two-regime flow orifice model for real-time simulation. Simulation Modelling Practice and Theory, 2008, 16(8): 945-961.
[16] B Xu, J Ma, J Lin. Computational flow rate feedback and control method in hydraulic elevators. Chinese Journal of Mechanical Engineering, 2005, 18(4): 490-493.
[17] J Chen. Research on flow feedback hydraulic elevator speed control system based on software calculation. Hangzhou: Zhejiang University, 2003. (in Chinese)
[18] B Xu, P Dong, J Zhang, et al. Research on a novel flow rate inferential measurement method and its application in hydraulic elevators. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(2): 372-386.
[19] J Zhang, D Wang, B Xu, et al. Flow control of a proportional directional valve without the flow meter. Flow Measurement and Instrumentation, Elsevier, 2019, 67: 131-141.
[20] J Jones. Developments in design of electrohydraulic control valves from their initial concept to present day design and applications. Melbourne: Workshop on Proportional and Servovalves, 1997.
[21] L Kelly, H-J Haas. Hydraulic proportional valves with digital controllers. International Fluid Power Exposition and Technical Conference, 1996: I96-11.5.
[22] C Boes. The advantages of new proportional and servo valves with integrated digital electronics. Moog Technical Paper, 2003.
[23] China Hydraulics Pneumatics & Seals Association. Fluid power transmission and control technology roadmap. Beijing: Science and Technology of China Press, 2012.
[24] H Heinken, K Krivenkov, S Ulrich, et al. High-pressure electrorheological valve with full pQ-functionality for servohydraulic applications. Journal of Intelligent Material Systems and Structures, 2015, 26(14): 1959-1967.
[25] J Y Yang. Direct type pressure and flow rate multiple control valve. Hangzhou: Zhejiang University of Technology, 2006. (in Chinese)
[26] R B Walters. Hydraulic and electric-hydraulic control systems. Dordrecht, The Netherlands: Kluwer academic publishers, 2000.
[27] Tinsley (Industrial Instruments) Ltd., D C Gall, F L Steghart. Improvements in or relating to servo systems: UK, GB14702/46A. 1949-03-29. https://patents.google.com/patent/GB620688A/en.
[28] P Tamburrano, A R Plummer, E Distaso, et al. A review of electro-hydraulic servovalve research and development. International Journal of Fluid Power, 2018: 1-23.
[29] Y X Lu. Historical progress and prospects of fluid power transmission and control. Chinese Journal of Chemical Engineering, 2010, 10(46): 1-9.
[30] G M Wu, M X Qiu, Q F Wang. Electrohydraulic proportional technique in theory and application. Hangzhou: Zhejiang University Press, 2006.
[31] M Goldfarb, E J Barth, K B Fite, et al. High bandwidth rotary servo valves. Patent 7, 322, 375. 2008-1-29.
[32] F T Brown, I S CTentarell, S Ramachandran. A hydraulic rotary switched inertance servo-transformer. Journal of Dynamic Systems, Measurement, and Control, 1988, 110(2): 144-150.
[33] M Pan, N Johnston, J Robertson, et al. Experimental investigation of a switched inertance hydraulic system with a high-speed rotary valve. Journal of Dynamic Systems, Measurement, and Control, 2015, 137(12), https://doi.org/10.1115/1.4031325.
[34] D T Branson, D N Johnston, D G Tilley, et al. Piezoelectric actuation in a high bandwidth valve. Ferroelectrics, 2010, 408: 32-40.
[35] C Han, S-B B Choi, Y-M M Han. A piezoelectric actuator-based direct-drive valve for fast motion control at high operating temperatures. Applied Sciences, 2018, 8(10): 1806.
[36] P A Sente, F M Labrique, P J Alexandre. Efficient control of a piezoelectric linear actuator embedded into a servo-valve for aeronautic applications. IEEE Transactions on Industrial Electronics, 2012, 59(4): 1971-1979.
[37] J Jeon, C Han, J U Chung, et al. Performance evaluation of a piezoactuator-based single-stage valve system subjected to high temperature. Smart Materials and Structures, 2015, 24(1): https://iopscience.iop.org/article/10.1088/0964-1726/24/1/015022.
[38] Z Yang, Z He, F Yang, et al. Design and analysis of a voltage driving method for electro-hydraulic servo valve based on giant magnetostrictive actuato. International Journal of Applied Electromagnetics and Mechanics, 2018, 57(4): 439-456.
[39] Z Yang, Z He, D Li, et al. Hydraulic amplifier design and its application to direct drive valve based on magnetostrictive actuator. Sensors and Actuators A: Physical, 2014, 216: 52-63.
[40] S Karunanidhi, M Singaperumal. Design, analysis and simulation of magnetostrictive actuator and its application to high dynamic servo valve. Sensors and Actuators A: Physical, 2010, 157(2): 185-197.
[41] S Nalbach, P Motzki, S Seelecke. SMA-based hydraulic switching valve. ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2015, 2015, 2(3): 1-9.
[42] A Zhang, F Tu, K Chen, et al. A type of MSMA electro-hydraulic servo valve based on neural network inverse system control. Proceedings of the 32nd Chinese Control Conference, IEEE, 2013: 1013-1016.
[43] N Lucian, R Olivier, M Hubertus. A control approach for fast voice coil actuators for servo valve applications in mobile and industrial hydraulics. Aachen: 11th International Fluid Power Conference, 2018: 318-329.
[44] S Wu, Z Jiao, L Yan, et al. Development of a direct-drive servo valve with high-frequency voice coil motor and advanced digital controller. IEEE/ASME Transactions on Mechatronics, 2013, 19(3): 932-942.
[45] K Abuowda, S Noroozi, M Dupac, et al. A dynamic model and performance analysis of a stepped rotary flow control valve. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2019, 233(9): 1195-1208.
[46] J Lux, C Habegger. New generation of intelligent electromechanical valve actuation. Aachen 11th International Fluid Power Conference, 2018: 394-403.
[47] F Imaduddin, S A Mazlan, M A A Rahman, et al. A high performance magnetorheological valve with a meandering flow path. Smart Materials and Structures, 2014, 23(6), https://doi.org/10.1088/0964-1726/23/6/065017.
[48] B Jin, Y G Zhu, W Li. PID parameters tuning of proportional directional valve based on multiple orthogonal experiments method: Method and experiments. Manufacturing Engineering and Process II. Trans. Tech. Publications Ltd., 2013, 325: 1166-1169.
[49] K J Åström, T Hägglund. PID controllers: theory, design, and tuning. Instrument society of America Research Triangle Park, NC, 1995, 2.
[50] G P Liu, S Daley. Optimal-tuning nonlinear PID control of hydraulic systems. Control Engineering Practice, 2000, 8(9): 1045-1053.
[51] J B Gamble. Sliding mode control system. U.S. Patents, 1994.
[52] J B Gamble. Robust sliding mode control of hydraulic valves. IEE Colloquium on Advances in the Application of Robust Controllers, 1993: 1-4.
[53] J B Gamble, N D Vaughan. Comparison of sliding mode control with state feedback and PID control applied to a proportional solenoid valve. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 1996, 118(3): 434-438.
[54] J H Fang, Z Chen, J H Wei. Some practical improvements of sliding-mode control for servo-solenoid valve. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 2016, 230(7): 591-609.
[55] Y Xiong, J Wei, R Feng. Adaptive robust control of a high-response dual proportional solenoid valve with flow force compensation. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 2015, 229(1): 3-26.
[56] W Shi, J Wei, J Fang. Desired compensation nonlinear cascade control of high-response proportional solenoid valve based on reduced-order extended state observer. IEEE Access, 2018, 6: 64503-64514.
[57] J Zhang, Z Lu, B Xu, et al. Investigation into the nonlinear characteristics of a high-speed drive circuit for a proportional solenoid controlled by a PWM signal. IEEE Access, 2018, 6: 61665-61676.
[58] Z Lu, J Zhang, B Xu, et al. Deadzone compensation control based on detection of micro flow rate in pilot stage of proportional directional valve. ISA Transactions, 2019, 94: 234-245.
[59] M Choux, G Hovland. Adaptive backstepping control of nonlinear hydraulic-mechanical system including valve dynamics. Mic: Modeling Identification and Control, Div. Eng. Cybernetics, 2010, 31(1): 35-44.
[60] W Gu, J Yao, Z Yao, et al. Robust adaptive control of hydraulic system with input saturation and valve dead-zone. IEEE Access, 2018, 6: 53521-53532.
[61] C Krimpmann, T Beryram, G Schoppel, et al. Adaptive sliding mode control of a pressure relief valve. e & i Elektrotechnik und Informationstechnik, 2016, 133(6): 261-265.
[62] Z Xie. Effect of flow forces on a flow control variable force solenoid. SAE International, 2011.
[63] M-H H Yoon, Y-Y Y Choi, J-P P Hong. Improvement in thrust force estimation of solenoid valve considering minor hysteresis loop. AIP Advances, 2017, 7(5): 056607.
[64] E Canuto, W Acuna-bravo, M Agostani, et al. Proportional electro-Hydraulic valves: From analogue to digital control. International Journal of Mechatronics and Automation, 2014, 4(2): 93-103.
[65] A Makarow, M Keller, C Rosmann, et al. Model predictive trajectory set control for a proportional directional control valve. 2017 IEEE Conference on Control Technology and Applications (CCTA), IEEE, 2017: 1229-1234.
[66] J Nurmi, M M Aref, J Mattila. A neural network strategy for learning of nonlinearities toward feed-forward control of pressure-compensated hydraulic valves with a significant dead zone. BATH/ASME 2018 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers Digital Collection, 2018.
[67] A Jansson, J-O Palmberg. Separate controls of meter-in and meter-out orifices in mobile hyraulic systems. SAE Transactions, 1990: 377-383.
[68] B Eriksson. Mobile fluid power systems design: with a focus on energy efficiency. Linköping University Electronic Press, 2010.
[69] A Hansen, H Pedersen, T Andersen, et al. Investigation of energy saving separate meter-in separate meter-out control strategies. 12th Scandinavian International Conference on Fluid Power, SICFP'11, Tampere University Press, 2011.
[70] B Yao, S Liu. Energy-saving control of hydraulic systems with novel programmable valves. Proceedings of the 4th World Congress on Intelligent Control and Automation (Cat. No.02EX527), 2002, 4: 3219-3223.
[71] M Vukovic, H Murrenhoff. Single edge meter out control for mobile machinery, 2014, ASME/BATH.
[72] Z Y Lu, J H Zhang, B Xu, et al. A novel proportional directional valve with independently controlled pilot stage. The 10th JFPS International Symposium on Fluid Power, Fukuoka, 2017.
[73] J H Zhang, Z Y Lu, B Xu, et al. Investigation on the dynamic characteristics and control accuracy of a novel proportional directional valve with independently controlled pilot stage. ISA Transactions, 2019, 93: 218-230.
[74] R Q Ding. The multi-mode control method of the independent metering system and its application in mobile machinery. Hangzhou: College of Mechanical Engineering, Zhejiang University, 2015.
[75] M Linjama. Digital fluid power - state of the art. The Twelfth Scandinavian International Conference on Fluid Power, 2011, 2(4): 18-20.
[76] D Fan, J D Yang, D Jing, et al. Advances on high-speed on-off valves. Chinese Journal of Construction Machinery, 2011, 9(3): 351-358.
[77] H Y Yang, S Wang, B Zhang, et al. Development and prospect of digital hydraulic valve and valve control system. Journal of Jilin University (Engineering and Technology Edition), 2016, 46(5): 1494-1505.
[78] Y Chen, M Pan, A Plummer. A review of switched inertance hydraulic converter technology. BATH/ASME 2018 Symposium on Fluid Power and Motion Control, American Society of Mechanical Engineers Digital Collection, 2018.
[79] J H Zhang, M S Yang, B Xu. Design and experimental research of a miniature digital hydraulic valve. Micromachines, 2018, 9(6), DOI: https://doi.org/10.3390/mi9060283.
[80] M S Yang, J H Zhang, B Xu. Experimental study and simulation analysis on electromagnetic characteristics and dynamic response of a new miniature digital valve. Advances in Materials Science and Engineering, 2018: 1-8.
[81] M Linjama, M Vilenius. Digital hydraulic control of a mobile machine joint actuator mockup. Power Transmission and Motion Control: PTMC, PTMC 2004, 2007, 7: 145.
[82] M Linjama, M Vilemius, P O Box, et al. Energy-efficient motion control of a digital hydraulic joint actuator. Proceedings of the JFPS International Symposium on Fluid Power. The Japan Fluid Power System Society, 2005, 2005(6): 640-645.
[83] T Lantela, M Pietola. High-flow rate miniature digital valve system. International Journal of Fluid Power, 2017, 18(3): 188-195.
[84] M Paloniitty, M Linjama, K Huhtala. Concept of digital microhydraulic valve system utilising lamination technology. Proceedings of the 9th International Fluid Power Conference, 2014, 1: 303-313.
[85] H Murrenhoff. Trends in valve development. Ölhydraulik und Pneumatik, 2003, 46(4): 1-36.
[86] G Keuper, R Romes, H Sandau. New valve concepts and CAN based data link for tractor hydraulics. VDI Berichte, 1996, 1297: 61-64.
[87] L Weibo. Study on intelligent valve and its signal extraction and two-line transmission mode based on field bus. Hangzhou: Zhejiang University, 2002.
[88] G W Li, L L Jin, Y Lin, et al. The development and prospect of electro-hydraulic proportional directional valve. Hydraulics Pneumatics & Seals, 2018, 38(3): 1-4.
[89] R Isermann. Fault-diagnosis applications: model-based condition monitoring: actuators, drives, machinery, plants, sensors, and fault-tolerant systems. Springer Science & Business Media, 2011.
[90] J Watton. Modelling, monitoring and diagnostic techniques for fluid power systems. Springer Science & Business Media, 2007.
[91] B Beck, J Weber. Enhancing safety of independent metering systems for mobile machines by means of fault detection. Linköping: Linköping University Electronic Press, 2017.
[92] H Raduenz, F J Souza. Evaluation of an on-line fault detection method for proportional hydraulic valves. 9th FPNI Ph.D. Symposium on Fluid Power. American Society of Mechanical Engineers Digital Collection, 2016.
[93] H Raduenz, Y E A Mendoza, D Ferronatto, et al. Online fault detection system for proportional hydraulic valves. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40(7): 331.
[94] S Sharifi, A Tivay, S M Rezaei, et al. Leakage fault detection in electro-hydraulic servo systems using a nonlinear representation learning approach. ISA Transactions, 2018, 73: 154-164.
[95] S Sharifi, S M Rezaei, A Tivay, et al. Multi-class fault detection in electro-hydraulic servo systems using support vector machines. 4th International Conference on Robotics and Mechatronics (ICROM). IEEE, 2016.
[96] X Zhao, S Zhang, C Zhou, et al. Experimental study of hydraulic cylinder leakage and fault feature extraction based on wavelet packet analysis. Computers and Fluids, Elsevier Ltd, 2015, 106: 33-40.
[97] F Chao. Study on fault diagnosis method of solenoid valve. Wuhan: Huazhong University of Science and Technology, 2017.
[98] L Wang, W D Qu. Fault diagnosis of servo valve with PCA-SVM. Process Automation Instrumentation, 2013(01): 25-28+31. (in Chinese)
[99] B Pan, J Q Xiong. The application of multi-sensor information fusion in the intelligent fault diagnosis of hydraulic system. Machine Tool & Hydraulics, 2006, 5.
[100] L Lei. Fault diagnosis and analysis of electro-hydraulic servo valve based on genetic optimization BP neural network. Qinhuangdao: Yanshan University, 2015.
[101] C Y Liu, L P Fan. Research on RBF-BP neural network fault diagnosis algorithm of electro-hydraulic servo valve based on genetic optimization. Journal of Shenyang University of Chemical Technology, 2015, 29(1): 49-53. (in Chinese)
[102] C Li. Fault diagnosis of electro-hydraulic servo valve based on BP neural network. Wuhan: Wuhan University of Science and Technology, 2010. (in Chinese)
[103] S Q Hao. Study on on-line fault intelligent diagnosis of hydraulic AGC servo valve. Shanghai: Shanghai Jiaotong University, 2010. (in Chinese)
[104] L D Fu, K S Chen, L C Zeng, et al. Study on improved intelligent fault diagnosis of electro-hydraulic servo valve. Journal of Wuhan University of Science and Technology, 2007, 30(2): 164-167. (in Chinese)
[105] S B Tan, J C Liu. Fault diagnosis of electro-hydraulic servo valve based on neural network. 2011 International Conference on Electric Information and Control Engineering. IEEE, 2011: 3274-3276.
[106] L Fu, K Chen, J Yu, et al. The fault diagnosis for electro-hydraulic servo valve based on the improved genetic neural network algorithm. 2006 International Conference on Machine Learning and Cybernetics. IEEE, 2006: 2995-2999.
[107] H M Liu, S P Wang, P C Ouyang. Fault diagnosis in a hydraulic position servo system using RBF neural network. Chinese Society of Aeronautics and Astronautics, 2006, 19(4): 346-353.
[108] H M Liu, S P Wang, P C Ouyang. Fault diagnosis based on improved Elman neural network for a hydraulic servo system. 2006 IEEE Conference on Robotics, Automation and Mechatronics, 2006.
[109] H M Liu, J C Zhang, C Lu. Performance degradation prediction for a hydraulic servo system based on Elman network observer and GMM-SVR. Applied Mathematical Modelling, Elsevier Inc., 2015, 39(19): 5882-5895.
[110] L Hu, K Cao, H Xu, et al. Fault diagnosis of hydraulic actuator based on least squares support vector machines. IEEE International Conference on Automation and Logistics. IEEE, 2007: 985-989.
[111] L M Hu, K Q Cao, H J Xu. Fault diagnosis of hydraulic steering gear based on regression support vector machine. Journal of System Simulation, 2007, 19(23): 5509-5512.
[112] K Cao, J Zhang, L Hu. Fault diagnosis of electro-hydraulic position servo closed-loop system based on support vector regression. Proceedings of the IEEE International Conference on Automation and Logistics, ICAL 2007, 2007: 3044-3049.
[113] M Muenchhof, M Beck, R Isermann. Fault-tolerant actuators and drives—Structures, fault detection principles and applications. Annual Reviews in Control, 2009, 33(2): 136-148.
[114] M Samadani, C A Kwuimy, C Nataraj. Fault detection and severity analysis of servo valves using recurrence quantification analysis. Villanova University, Villanova, United States, 2014.
[115] L Borello, MDL Dalla Vedova, G Jacazio, et al. A prognostic model for electrohydraulic servovalves. Annual Conference of the Prognostics and Health Management Society. 2009: 1-12.
[116] W Xuanyin, L Xiaoxiao, L Fushang. Analysis on oscillation in electro-hydraulic regulating system of steam turbine and fault diagnosis based on PSOBP. Expert Systems with Applications, 2010, 37(5): 3887-3892.
[117] Z Yao. Study on fault diagnosis technology of hydraulic excavator multi-channel valve group based on model prediction. Xiangtan: Xiangtan University, 2015. (in Chinese)
[118] P Athanasatos, T Costopoulos. Proactive fault finding in a 4/3-way direction control valve of a high pressure hydraulic system using the bond graph method with digital simulation. Mechanism and Machine Theory, 2012, 50: 64-89.
[119] D G Luenberger. Observing the state of a linear system. IEEE Transactions on Military Electronics, 1964, 8(2): 74-80.
[120] D Min, L Cai. Sensor fault diagnosis of HAGC system for strip rolling mill based on wavelet transform. Journal of Iron and Steel Research, 2006, 18(12): 54.
[121] S C Abou, M Kulkarni, M Stachowicz. Actuated hydraulic system fault detection: A fuzzy logic approach. Engineering Letters, 2010, 18(1).
[122] H Khan, S C Abou, N Sepehri. Nonlinear observer-based fault detection technique for electro-hydraulic servo-positioning systems. Mechatronics, 2005, 15(9): 1037-1059.
[123] A S Rezazadeh, H R Koofigar, S Hosseinnia. Robust leakage detection for electro hydraulic actuators using an adaptive nonlinear observer. International Journal of Precision Engineering and Manufacturing, 2014, 15(3): 391-397.
[124] Q N Xu, K M Lee, H Zhou, et al. Model-based fault detection and isolation scheme for a rudder servo system. IEEE Transactions on Industrial Electronics, 2014, 62(4): 2384-2396.
[125] Q N Xu. Study on fault diagnosis of electro-hydraulic servo system of Marine steering gear based on uncertain model. Hangzhou: Zhejiang University, 2015.
[126] P Garimella, B Yao. Robust model-based fault detection using adaptive robust observers. Proceedings of the 44th IEEE Conference on Decision and Control, IEEE, 2005: 3073-3078.
[127] P Garimella, B Yao. Model based fault detection of an electro-hydraulic cylinder. Proceedings of the 2005, American Control Conference, 2005: 484-489.
[128] S Gayaka, B Yao, P Meckl. Fault detection for nonlinear systems in presence of input unmodeled dynamics. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, 2007.
[129] S Gayaka, B Yao. Fault detection, identification and accommodation for an electro-hydraulic system: An adaptive robust approach. IFAC Proceedings Volumes, 2008, 41(2): 13815-13820.
[130] H Alwi, C Edwards. Application of second order sliding mode observers for fault reconstruction on the ADDSAFE benchmark. AIAA Guidance, Navigation, and Control Conference 2011, 2011: 1-24.
[131] L Liu. Research on additive fault detection and fault-tolerant control strategy of electromechanical hydraulic servo system based on sliding mode. Nanjing: Nanjing University of Science and Technology, 2016. (in Chinese)
[132] I Arasaratnam, S Haykin. Cubature kalman filters. IEEE Transactions on Automatic Control, 2009, 54(6): 1254-1269.
[133] J Dunik, O Straka, M Šimandl. Stochastic integration filter. IEEE Transactions on Automatic Control, 2013, 58(6): 1561-1566.
[134] X Wang, V L Syrmos. Fault detection, identification and estimation in the electro-hydraulic actuator system using EKF-based multiple-model estimation. 2008 16th Mediterranean Conference on Control and Automation. IEEE, 2008: 1693-1698.
[135] P A Halder. A novel approach for detection and diagnosis of process and sensor faults in electro-hydraulic actuator. Int. J. Engineering Research and Development, 2013, 6(7): 15-22.
[136] P Halder, S Mukhopadhyay, et al. Detection and diagnosis of process and sensor faults in electro-hydraulic actuator using extended Kalman filter (EKF). Proceedings of Advances in Control and Optimization of Dynamic Systems, 2012.
[137] L An, N Sepehri. Hydraulic actuator leakage quantification scheme using extended Kalman filter and sequential test method. 2006 American Control Conference, IEEE, 2006.
[138] L An, N Sepehri. Hydraulic actuator leakage fault detection using extended Kalman filter. International Journal of Fluid Power, 2005, 6(1): 41-51.
[139] L An. Actuator leakage fault detection and isolation based on extended Kalman filtering scheme. University of Manitoba, 2007.
[140] S Julier, J Uhlmann, H F Durrant-Whyte. A new method for the nonlinear transformation of means and covariances in filters and estimators. IEEE Transactions on Automatic Control, 2000, 45(3): 477-482.
[141] D Simon. Optimal state estimation: Kalman, H infinity, and nonlinear approaches. John Wiley & Sons, 2006.
[142] M Sepasi, F Sassani. On-line fault diagnosis of hydraulic systems using unscented Kalman filter. International Journal of Control, Automation and Systems, 2010, 8(1): 149-156.
[143] J Nurmi, J Mattila. Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 2: fault detection and isolation scheme. International Journal of Fluid Power, 2012, 13(1): 17-27.
[144] J Nurmi, J Mattila. Detection and isolation of faults in mobile hydraulic valves based on a reduced-order model and adaptive thresholds. ASME/BATH 2013 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers Digital Collection, 2013.
文章导航

/