先进材料加工工程

超大型环件径轴向轧制过程稳定性与圆度自适应控制方法研究

展开
  • 1.武汉理工大学现代汽车零部件技术湖北省重点实验室,武汉,430070
    2.武汉理工大学汽车零部件技术湖北省协同创新中心,武汉,430070
    3.武汉理工大学材料绿色精密成形技术与装备湖北省工程中心,武汉,430070
宁湘锦,男,1997年生,硕士研究生。研究方向为环件塑性成形及控制。E-mail:541128080@qq.com。

收稿日期: 2021-04-28

  网络出版日期: 2022-06-30

基金资助

国家重点研发计划(2019YFB1704502);国家自然科学基金(U2037204,52175362);湖北省杰出青年基金(2019CFA041)

Research on Stability and Roundness Adaptive Control Method of Radial and Axial Ring Rolling Processes of Super Large Rings

Expand
  • 1.Hubei Key Laboratory of Advanced Technology of Automobile Parts,Wuhan University of Technology,Wuhan,430070
    2.Hubei Collaborative Innovation Center of Automotive Components Technology,Wuhan University of Technology,Wuhan,430070
    3.Hubei Engineering Center of Material Green Precision Forming Technology and Equipment,Wuhan University of Technology,Wuhan,430070

Received date: 2021-04-28

  Online published: 2022-06-30

摘要

超大型环件径轴向轧制过程失稳、失圆等异常状态常导致轧环终止和产品质量波动。提出了轧环过程稳定性和圆度自适应控制方法,从历史数据中归纳人工控制经验知识,建立了基于锥辊转速模糊调节的轧制稳定性控制方法,制定了基于导向力反馈的轧制圆度控制策略。运用ABAQUS有限元软件和子程序二次开发,设计了轧环过程稳定性和圆度自适应控制子程序,建立了16 m超大型环件轧制过程控制有限元模型,仿真分析了锥辊转速模糊调节、导向力反馈以及基于限幅滤波的锥辊转速模糊调节+导向力反馈综合控制下的轧环过程偏移量和圆度误差变化规律,结果表明该方法与常规规划控制相比,环件偏移量减小了48.3%,圆度误差减小了61.8%。

本文引用格式

宁湘锦, 汪小凯, 华林, 韩星会, 张科, . 超大型环件径轴向轧制过程稳定性与圆度自适应控制方法研究[J]. 中国机械工程, 2022 , 33(11) : 1353 -1360 . DOI: 10.3969/j.issn.1004-132X.2022.11.012

Abstract

In the radial and axial rolling processes of super large rings, such abnormal conditions as instability and loss of roundness often led to rolling termination and quality fluctuation. An adaptive control method of stability and roundness of ring rolling processes was proposed, and the experience of manual control was summarized from historical data. The stability control method of ring rolling was established based on fuzzy adjustment of cone roll revolution speed, and the roundness control strategy of ring rolling was developed based on the guide force feedback. Using ABAQUS software and subroutines, the adaptive control subroutines of ring rolling processes were designed, and finite element models of adaptive control of 16 m super large ring rolling processes were established. The rings offset and roundness error change rules were analyzed during ring rolling processes in different methods of cone roller revolution speed fuzzy adjustment, guide force feedback and cone roller revolution speed fuzzy adjusting integrated guidance force feedback comprehensive control. The results show that, with regard to the control method, the rings offset is reduced by 48.3% and the roundness errors are reduced by 61.8% compared with the conventional control methods.

参考文献

[1]华林, 钱东升. 轴承环轧制成形理论和技术[J]. 机械工程学报, 2014, 50(16):70-76.
HUA Lin, QIAN Dongsheng. Bearing Ring Rolling Forming Theory and Technology[J]. Journal of Mechanical Engineering, 2014, 50(16):70-76.
[2]胡正寰,华林. 零件轧制成形技术[M]. 北京:化学工业出版社, 2010.
HU Zhenghuan, HUA Lin. Rolling Technology of Parts[M]. Beijing:Chemical Industry Press, 2010.
[3]ZHOU G, HUA L, QIAN D, et al. Effects of Axial Rolls Motions on Radia-axial Rolling Process for Large-scale Alloy Steel Ring with 3D Coupled Thermo-mechanical FEA[J]. International Journal of Mechanical Sciences, 2012, 59:1-7.
[4]CLEAVER C, ALLWOOD J M. Curvature Development in Ring Rolling[J]. Journal of Materials Processing Technology, 2019, 267:316-337.
[5]HENKE T, HIRT G, BAMBACH M. Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process[J]. Materials Science Forum, 2013, 762:354-359.
[6]徐坤和, 张文学, 阳代军, 等. 9 m级超大直径2219铝合金整体环件的研制[J]. 锻压技术, 2016, 41(10):92-97.
XU Kunhe, ZHANG Wenxue, YANG Daijun, et al. Development of 9 m Grade Super Large Diameter 2219 Aluminum Alloy Integral Ring[J]. Forging Technology, 2016, 41(10):92-97.
[7]LIANG L, GUO L, WANG Y, et al. Towards an Intelligent FE Simulation for Real-time Temperature-controlled Radial-axial Ring Rolling Process[J]. Journal of Manufacturing Processes, 2019, 48:1-11.
[8]QIAN D, PAN Y. 3D Coupled Macro-microscopic Finite Element Modelling and Simulation for Combined Blank-forging and Rolling Process of Alloy Steel Large Ring[J]. Computational Materials Science, 2013, 70:24-36.
[9]ALLWOOD J, DUNCAN S, CAO J, et al. Closed-loop Control of Product Properties in Metal Forming[J]. CIRP Annals:Manufacturing Technology, 2016, 65:573-596.
[10]LIEH J, LI W. On-line Fuzzy Logic Control of Tube Bending[J]. Proceedings of SPIE:the International Society for Optical Engineering, 2005, 5999:130-141.
[11]MANABE K. Advanced In-process Control System for Sheet Stamping and Tube Hydroforming Processes[J]. Key Engineering Materials, 2014, 622/623:3-14.
[12]JENKOUK V, HIRT G, FRANZKE M, et al. Finite Element Analysis of the Ring Rolling Process with Integrated Closed-loop Control[J]. CIRP Annals:Manufacturing Technology, 2012, 61:267-270.
[13]HUA L, PAN L B, LAN J. Researches on the Ring Stiffness Condition in Radial-axial Ring Rolling[J]. Journal of Materials Processing Technology, 2009, 209:2570-2575.
[14]郭良刚, 邸伟佳, 杨合, 等. 难变形材料环件双向辗轧过程轧制曲线设计方法[J]. 机械工程学报, 2014, 50(16):83-88.
GUO Lianggang, DI Weijia, YANG He, et al. Design Method of Rolling Curve in Two-way Rolling Process of Ring for Difficult to Deform Materials [J]. Journal of Mechanical Engineering, 2014, 50 (16):83-88
[15]LIANG L, GUO L, LI X C, et al. Intelligent Simulation for Real-timely Force-controlled Radial-axial Rolling Process of Supersized Aluminium Alloy Rings[J]. Procedia Manufacturing, 2018, 15:105-112.
文章导航

/

〈 〉