针对现有工艺尺寸标注方法存在无法精确描述零件加工前后特征变化的问题,提出面向三维工艺智能设计的工艺尺寸快速标注方法。首先,建立去除体的参数化快速建模方法,构建去除特征与定形尺寸之间的组织与管理机制;其次,在工艺模型逆向创建过程中,分析工序特征、去除体与工艺尺寸三者之间的关联关系,构建“特征-尺寸-去除体”约束机制以快速生成工艺模型的工艺尺寸;然后,根据工艺尺寸标注元素优先级和尺寸间的约束关系,构建工艺尺寸的完备性检查与规范化处理方法;最后,基于三维零件工艺设计系统,集成开发工艺尺寸标注模块,选用两个典型板腔类复杂加工零件工艺设计为对象,验证工艺尺寸快速标注方法的可行性与有效性。
Aiming at the problems that the existing technological dimension marking methods could not accurately describe the feature changes of parts before and after machining, a fast technological dimension marking method oriented to 3D technological intelligent design was proposed. Firstly, a parameterized fast modeling method for the removal body was established, and the organization and management mechanism between the removal feature and the dimension was established. Secondly, in the processes of reverse creation of technological model, the relationship among technological characteristics, removal volume and technological dimension was analyzed, and the constraint mechanism of “feature-dimension-removal volume” was established to quickly generate technological dimension of technological model. Then, the completeness check and standardized processing method of technological dimensions were constructed according to the constraint relationship between the priority of process dimensions marking elements and dimensions. Finally, based on the 3D part technological design system, the technological dimension marking module was integrated and developed. Two typical complex mached parts were selected as the objects to verify the feasibility and effectiveness of the rapid technological dimension marking method.
[1]刘世民, 王海超, 鲍劲松, 等. 面向工序建模的特征MBD设计信息提取方法[J]. 东华大学学报(自然科学版), 2018, 44(4):532-540.
LIU Shimin, WANG Haichao, BAO Jinsong, et al. Method of Extracting MBD Design Information in Feature for Process Modeling[J]. Journal of Donghua University(Natural Science Edition),2018,44(4):532-540.
[2]乔立红, 张金. 三维数字化工艺设计中的关键问题及其研究[J]. 航天制造技术, 2012, 171(1):29-32.
QIAO Lihong, ZHANG Jin. Some Key Issues in Three-dimensional Digital Process Planning and Their Research[J]. Aerospace Manufacturing Technology, 2012, 171(1):29-32.
[3]万能, 常智勇, 莫蓉. 机加工艺设计的三维新模式研究[J]. 计算机集成制造系统, 2011, 17(9):1873-1879.
WAN Neng, CHANG Zhiyong, MO Rong. Three-dimensional New Mode of Machining Process Planning[J]. Computer Integrated Manufacturing Systems, 2011, 17(9):1873-1879.
[4]刘检华, 孙清超, 程晖, 等. 产品装配技术的研究现状技术内涵及发展趋势[J]. 机械工程学报, 2018, 54(11):2-28.
LIU Jianhua, SUN Qingchao, CHENG Hui, et al. The State-of-the-art Connotation and Developing Trends of the Products Assembly Technology[J]. Journal of Mechanical Engineering, 2018, 54(11):2-28.
[5]刘晓军, 刘金锋, 倪中华, 等. 基于三维模型的机加工艺设计关键技术[J]. 机械制造与自动化, 2019, 48(6):1-6.
LIU Xiaojun, LIU Jinfeng, NI Zhonghua, et al. Review and Prospect of Machining Process Planning Technology Based on 3D Model[J]. Mechanical Manufacturing and Automation, 2019, 48(6):1-6.
[6]刘检华, 孙连胜, 张旭, 等. 三维数字化设计制造技术内涵及关键问题[J]. 计算机集成制造系统, 2014, 20(3):494-504.
LIU Jianhua, SUN Liansheng, ZHANG Xu, et al. Connotation and Key Problem of Three-dimensional Digital Design and Manufacturing Technology[J]. Computer Integrated Manufacturing Systems, 2014, 20(3):494-504.
[7]刘金锋, 周宏根, 刘晓军. 面向三维机加工艺重用的加工特征匹配方法[J]. 计算机辅助设计与图形学学报, 2017, 29(4):768-775.
LIU Jinfeng, ZHOU Honggen, LIU Xiaojun. Study on Machining Features Matching for 3D Machining Process Reuse[J]. Journal of Computer-Aided Design & Computer Graphics, 2017, 29(4):768-775.
[8]刘金锋, 周宏根, 刘晓军. 面向三维机加工艺设计的倾斜平面映射去除体的方法研究[J]. 计算机集成制造系统, 2017, 23(2):236-242.
LIU Jinfeng, ZHOU Honggen, LIU Xiaojun. Method of Mapping Slanting Face to Its Removal Volume in 3D Machining Process Planning[J]. Computer Integrated Manufacturing Systems, 2017, 23(2):236-242.
[9]刘金锋, 倪中华, 刘晓军, 等. 三维机加工工艺工序间模型快速创建方法[J]. 计算机集成制造系统, 2014, 20(7):1546-1552.
LIU Jinfeng, NI Zhonghua, LIU Xiaojun, et al. Rapidly Create Method for Inter-process Model of 3D Machining Process[J]. Computer Integrated Manufacturing Systems, 2014, 20(7):1546-1552.
[10]张宝源, 席平. 三维标注技术发展概况[J]. 工程图学学报, 2011, 32(4):74-79.
ZHANG Baoyuan, XI Ping. The State of the Art of 3D Annotating Technology[J]. Journal of Engineering Graphics, 2011, 32(4):74-79.
[11]孛朝旺, 杨志宏, 王林博, 等. 尺寸工程技术综述与展望[J]. 计算机集成制造系统, 2014, 20(3):464-470.
BO Chaowang, YANG Zhihong, WANG Linbo, et al. Review and Outlook of Dimensional Engineering[J]. Computer Integrated Manufacturing Systems, 2014, 20(3):464-470.
[12]ALAN H, BOND H, SYED Z, et al. Knowledge-based Automatic Dimensioning[J]. Artificial Intelligence in Engineering, 1989, 4(1):32-40.
[13]许璟琳, 郑国磊, 王勃. 基于GB/T24734的三维尺寸快速标注技术[J]. 图学学报, 2013, 34(5):138-142.
XU Jinglin, ZHENG Guolei, WANG Bo. Rapid Three-dimensional Annotation Based on GB/T 24734[J]. Journal of Graphics, 2013, 34(5):138-142.
[14]安恒, 闫光荣, 雷毅. 基于GB/T24734的三维自动标注[J]. 北京航空航天大学学报, 2012, 38(3):416-421.
AN Heng, YAN Guangrong, LEI Yi. Automatic Dimensioning of 3D Model Based on GB / T 24734[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(3):416-421.
[15]SUN Dongyang, HU Yanping. Research on Automatic Dimensioning of the Engineering Drawing Based on CBR[J]. IOP Conference Series:Earth and Environmental Science, 2019, 252(5), 0852118.
[16]余建利, 黄长林, 陆国栋. 基于模式引导的尺寸自动标注方法研究[J]. 浙江工业大学学报, 2000, 28(增刊1):79-84.
YU Jianli, HUANG Changlin, LU Guodong. Researchon Automatic Dimensi on Based on Model Direct[J]. Journal of Zhejiang University of Technology, 2000, 28(S1):79-84.
[17]ZHOU Honggen, SHENG Sushan, LIU Jinfeng, et al. Research on Intelligent Generation Method of Process Dimension Based on Feature Constraint[J]. The International Journal of Advanced Manufacturing Technology, 2021, 116:1003-1021.
[18]王勃, 郑国磊, 段丽华. 轴类零件三维尺寸自动标注算法[J]. 北京航空航天大学学报, 2013, 39(6):829-834.
WANG Bo, ZHENG Guolei, DUAN Lihua. Automatic Dimensioning for 3D Model of Shaft-like Parts[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(6):829-834.
[19]易声耀, 曹玉君, 梁兵. 基于特征尺寸的机械零件图样尺寸标注方法研究[J]. 机械工程师, 2021(6):6-8.
YI Shengyao, CAO Yujun, LIANG Bing. Research on the Dimension Marking Method of Mechanical Parts Drawing Based on Feature Dimensions[J]. Mechanical Engineer, 2021(6):6-8.
[20]申闫春, 刘方鑫, 刘厚泉, 等. 基于模式匹配的参数化尺寸标注机理研究[J]. 计算机辅助设计与图形学学报, 2000, 22(1):23-27.
SHEN Yanchun, LIU Fangxin, LIU Houquan, et al. Study of Parameterized Dimensioning System Basedon Pattern Matching[J]. Journal of Computer-Aided Design & Computer Graphics, 2000, 22(1):23-27.
[21]陆国栋, 黄长林, 彭群生. 基于分治思想的尺寸自动标注方法的研究与实现[J]. 计算机辅助设计与图形学学报, 2001, 21(6):521-526.
LU Guodong, HUANG Changlin, PENG Qunsheng. Research on Automatic Dimensioning Based on Divideand Conquer Strategy[J]. Journal of Computer-Aided Design & Computer Graphics, 2001, 21(6):521-526.
[22]倪健红, 陆国栋. 基于功能语义的三维尺寸模型自动生成[J]. 机械, 2005(1):6-8.
NI Jianhong, LU Guodong. Automatic Generate of 3D Dimension Model Based on the Function Semantics[J]. Machinery, 2005(1):6-8.
[23]侯增选, 李林, 黄磊, 等. 三维工艺模型标注尺寸构造方法研究[J]. 图学学报, 2018, 39(5):843-848.
HOU Zengxuan, LI Lin, HUANG Lei, et al. Research on Dimensional Construction Method of 3D Process Model[J]. Journal of Graphics, 2018, 39(5):843-848.
[24]ZOU H L, LEE Y T. Constraint-based Beautification and Dimensioning of 3D Polyhedral Models Reconstructed from 2D Sketches[J]. Computer-Aided Design, 2007, 39(11):1025-1036.
[25]LIU Xiaojun, XING Jialu, CHENG Yalong, et al. An Inspecting Method of 3D Dimensioning Completeness Based on the Recognition of RBs[J]. Journal of Manufacturing Systems, 2017, 42:271-188.
[26]张树有, 彭群生, 谭建荣. 基于空间基坐标的尺寸可标注性判别研究[J]. 计算机学报, 2000, 23(9):982-986.
ZHANG Shuyou, PENG Qunsheng, TAN Jianrong. Researchon the Check for Dimension Basedon Spatial Basic Coordinates[J]. Chinese Journal Computers, 2000, 23(9):982-986.
[27]罗磊, 刘远, 郑国磊. 三维零件模型工程尺寸完备性检查算法[J]. 计算机辅助设计与图形学学报, 2018, 30(9):1748-1754.
LUO Lei, LIU Yuan, ZHENG Guolei. Algorithm for Inspection of Engineering Dimensioning Completeness on 3D Parts Model[J]. Journal of Computer-Aided Design & Computer Graphics, 2018, 30(9):1748-1754.