[1]胡定华, 邱晗, 李强. 局部沸腾液滴内部气泡动态行为研究[J]. 工程热物理学报, 2021, 42(4):1026-1031.
HU Dinghua, QIU Han, LI Qiang. Study on Bubble Dynamics Inside Droplets under Local Boiling[J]. Journal of Engineering Thermophysics, 2021, 42(4):1026-1031.
[2]张涛, 阮金锴, 程巍. 切削液废水处理技术研究进展[J]. 环境工程学报, 2020, 14(9):2362-2377.
ZHANG Tao, RUAN Jinkai, CHENG Wei. Progresses in the Treatment Processes and Techniques for Cutting Fluid Wastewater[J]. Chinese Journal of Environmental Engineering, 2020, 14(9):2362-2377.
[3]袁松梅, 韩文亮, 朱光远, 等. 绿色切削微量润滑增效技术研究进展[J]. 机械工程学报, 2019, 55(5):175-185.
YUAN Songmei, HAN Wenliang, ZHU Guang-yuan, et al. Recent Progress on the Efficiency Increasing Methods of Minimum Quantity Lubrication Technology in Green Cutting[J]. Journal of Mechanical Engineering, 2019, 55(5):175-185.
[4]张高峰, 李景焘, 王志刚, 等. 低温冷风纳米粒子微量润滑磨削轴承钢试验研究[J]. 中国机械工程, 2019, 30(19):2342-2348.
ZHANG Gaofeng, LI Jingtao, WANG Zhigang, et al. Experimental Study on Nano-CMQL Grinding of Bearing Steels[J]. China Mechanical Engineering, 2019, 30(19):2342-2348.
[5]刘大维, 覃孟扬, 罗永顺, 等. 切削参数对碳钢微量润滑切削温度的影响[J]. 机床与液压, 2016, 44(15):133-136.
LIU Dawei, QIN Mengyang, LUO Yongshun, et al. Effect of Cutting Parameters on MQL Cutting Temperature of Carbon Steel [J]. Machine Tool and Hydraulics, 2016, 44(15):133-136.
[6]裴宏杰, 刘成石, 王贵成, 等. MQL高速车削7075铝合金的试验研究[J]. 工具技术, 2018, 52(3):32-34.
PEI Hongjie, LIU Chengshi, WANG Guicheng, et al. Experimental Study on High-speed MQL Turning of 7075 Aluminum Alloy[J]. Tool Engineering, 2018, 52(3):32-34.
[7]VISWANATHAN R, RAMESH S, SUBBURAM V. Measurement and Optimization of Performance Characteristics in Turning of Mg Alloy under Dry and MQL Conditions[J]. Measurement, 2018, 120:107-113.
[8]SADEGHI M H, HADDAD M J, TAWAKOLI T, et al. Minimal Quantity Lubrication-MQL in Grinding of Ti-6Al-4V Titanium Alloy [J]. The International Journal of Advanced Manufacturing Technology, 2009, 44:487-500.
[9]KAYNAK Y. Evaluation of Machining Performance in Cryogenic Machining of Inconel 718 and Comparison with Dry and MQL Machining[J]. International Journal of Advanced Manufacturing Technology, 2014, 72:919-933.
[10]MIA M, BASHIR M A, KHAN M A, et al. Optimization of MQL Flow Rate for Minimum Cutting Force and Surface Roughness in End Milling of Hardened Steel (HRC40) [J]. The International Journal of Advanced Manufacturing Technology, 2017, 89:675-690.
[11]高东强, 曾行军, 何乃如, 等. 低温切削技术在难加工材料加工中的应用[J]. 制造技术与机床, 2020(6):39-43.
GAO Dongqiang, ZENG Hangjun, HE Nairu, et al. Application of Low Temperature Cutting Technology in the Processing of Difficult Materials[J]. Manufacturing Technology and Machine Tool, 2020(6):39-43.
[12]JAMIL M, KHAN A M, HEGAB H, et al. Effects of Hybrid Al2O3-CNT Nanofluids and Cryogenic Cooling on Machining of Ti-6Al-4V[J]. International Journal of Advanced Manufacturing Technology, 2019, 102(9/12):3895-3909.
[13]JAWAHIR I S, ATTIA H, BIERMANN D, et al. Cryogenic Manufacturing Processes[J]. CIRP Annals—Manufacturing Technology, 2016, 65(2):713-736.
[14]SHOKRANI A, SAMARRAI A I, NEWMAN S T. Hybrid Cryogenic MQL for Improving Tool Life in Machining of Ti-6Al-4V Titanium Alloy[J]. Journal of Manufacturing Processes, 2019, 43:229-243.
[15]IQBAL A, ZHAO W, ZAINI J. Comparative Analyses of Multi-pass Face-turning of a Titanium Alloy under Various Cryogenic Cooling and Micro-Lubrication Conditions[J]. International Journal of Lightweight Materials and Manufacture, 2019, 2(4):388-396.
[16]RIBEIRO F S F, LOPES J C, GARCIA M V, et al. New Knowledge about Grinding Using MQL Simultaneous to Cooled Air and MQL Combined to Wheel Cleaning Jet Technique[J]. International Journal of Advanced Manufacturing Technology, 2020, 109(3/4):905-917.
[17]PUSAVEC F, DESHPANDE A, YANG S, et al. Sustainable Machining of High Temperature Nickel Alloy-Inconel 718:Part 1—Predictive Performance Models[J]. Journal of Cleaner Production, 2014, 81:255-269.
[18]BIERMANN D, ABRAHAMS H, METZGER M. Experimental Investigation of Tool Wear and Chip Formation in Cryogenic Machining of Titanium Alloys[J]. Advances in Manufacturing, 2015, 3(4):292-299.
[19]KHANAFER K, ELTAGGAZ A, DEIAB I, et al. Toward Sustainable Micro-drilling of Inconel718 Superalloy Using MQL-nanofluid[J]. International Journal of Advanced Manufacturing Technology, 2020, 107(7/8):3459-3469.
[20]ZHANG C L, ZHANG S, YAN X F, et al. Effects of Internal Cooling Channel Structures on Cutting Forces and Tool Life in Side Milling of H13 Steel under Cryogenic Minimum Quantity Lubrication Condition[J]. International Journal of Advanced Manufacturing Technology, 2016, 83(5/8):975-984.
[21]LU T, KUDARAVALLI R, GEORGIOU G. Cryogenic Machining through the Spindle and Tool for Improved Machining Process Performance and Sustainability:Pt. Ⅰ, System Design[J]. Procedia Manufacturing, 2018, 21:266-272.
[22]TAHMASEBI E, ALBERTELLI P, LUCCHINI T, et al. CFD and Experimental Analysis of the Coolant Flow in Cryogenic Milling[J]. International Journal of Machine Tools and Manufacture, 2019, 140:20-33.
[23]GRGURAS D, STERLE L, KRAJNIK P, et al. A Novel Cryogenic Machining Concept Based on a Lubricated Liquid Carbon Dioxide[J]. International Journal of Machine Tools and Manufacture, 2019, 145:103456.
[24]BERGS T, PUAVEC F, KOCH M, et al. Investigation of the Solubility of Liquid CO2 and Liquid Oil to Realize an Internal Single Channel Supply in Milling of Ti-6Al-4V[J]. Procedia Manufacturing, 2015, 33:200-207.
[25]CORDES S, HBNER F, SCHAARSCHMIDT T. Next Generation High Performance Cutting by Use of Carbon Dioxide as Cryogenics[J]. Procedia CIRP, 2014, 14:401-405.
[26]ISLAM A, MIA M, DHAR N R. Effects of Internal Cooling by Cryogenic on the Machinability of Hardened Steel[J]. International Journal of Advanced Manufacturing Technology, 2017, 90(1/4):11-20.
[27]FERNNDEZ D, SAND A, BENGOETXEA I. Cryogenic Milling:Study of the Effect of CO2 Cooling on Tool Wear When Machining Inconel 718, Grade EA1N Steel and Gamma TiAl[J]. Lubricants, 2019, 7(1):7010010.
[28]李宽, 刘海波, 刘阔, 等. 液氮内喷式刀柄温度场仿真分析[J]. 工具技术, 2018, 52(12):67-71.
LI Kuan, LIU Haibo, LIU Kuo, et al. Temperature Field Simulation of Liquid Nitrogen Jet Cooling Tool Holder[J]. Tool Engineering, 2018, 52(12):67-71.
[29]王永青, 韩灵生, 刘阔, 等. 超低温加工机床的液氮冷却介质可靠传输与精准调控[J]. 机械工程学报, 2020, 56(1):187-195.
WANG Yongqing, HAN Lingsheng, LIU Kuo, et al. Reliable Transmission and Precise Regulation of Liquid Nitrogen as the Coolant of Cryogenic Machine Tool[J]. Journal of Mechanical Engineering, 2020, 56(1):187-195.
[30]王永青, 郭东明, 郭立杰, 等. 超低温加工技术的研究现状及发展趋势[J]. 上海航天, 2020, 37(3):11-21.
WANG Yongqing, GUO Dongming, GUO Lijie,et al. Research Status and Development Trend of Cryogenic Machining Technology[J]. Aerospace Shanghai, 2020, 37(3):11-21.
[31]王永青, 班仔优, 韩灵生, 等. 液氮内喷式主轴迷宫密封结构变形对泄漏特性的影响[J]. 机械工程学报, 2021, 57(3):129-136.
WANG Yongqing, BAN Zaiyou, HAN Lingsheng, et al. Influence of Structure Deformation on Leakage Characteristics in Labyrinth Seal Inside the Cryogenic Internal-cooling Spindle[J]. Journal of Mechanical Engineering, 2021, 57(3):129-136.
[32]熊伟强, 王成勇. 一种用于金属加工的超临界二氧化碳复合雾化喷嘴:CN207205987U[P].2018-04-10.
XIONG Weiqiang, WANG Chengyong. The Utility Model Relates to a Supercritical Carbon Dioxide Composite Atomizing Nozzle for Metal Processing:CN207205987U [P].2018-04-10.
[33]LIU M Z, LI C H, ZHANG Y B, et al. Cryogenic Minimum Quantity Lubrication Machining:from Mechanism to Application[J].Frontiers of Mechanical Engineering, 2021, 16(4): 649-697.
[34]SANCHEZ J A, POMBO I, ALBERDI R, et al. Machining Evaluation of a Hybrid MQL-CO2 Grinding Technology[J]. Journal of Cleaner Production, 2010, 18(18):1840-1849.
[35]权国政, 温志航, 沈力, 等. 镍基高温合金热塑性变形晶粒细化与粗化的博弈关系及演进[J]. 材料导报, 2021, 35(18):18124-18130.
QUAN Guozheng, WEN Zhihang, SHEN Li, et al. Game Relation between Grain Refinement and Grain Coarsening in Thermoplastic Deformation of Nickel-based Superalloy and Its Evolution[J]. Material Report, 2021, 35(18):18124-18130.
[36]HUANG P, LI H C, ZHU W L, et al. Effects of Eco-friendly Cooling Strategy on Machining Performance in Micro-scale Diamond Turning of Ti-6Al-4V[J]. Journal of Cleaner Production, 2020, 243:118526.
[37]毛聪, 邹洪富, 黄勇, 等. 微量润滑平面磨削接触区换热机理的研究[J]. 中国机械工程, 2014, 25(6):826-831.
MAO Cong, ZOU Hongfu, HUANG Yong, et al. Research on Heat Transfer Mechanism in Grinding Zone for MQL Surface Grinding[J]. China Mechanical Engineering, 2014, 25(6):826-831.
[38]ZHANG J C, LI C H, ZHANG Y B, et al. Temperature Field Model and Experimental Verification on Cryogenic Air Nanofluid Minimum Quantity Lubrication Grinding[J]. International Journal of Advanced Manufacturing Technology, 2018, 97(1/4):209-228.
[39]KIM D Y, KIM D M, PARK H W. Predictive Cutting Force Model for a Cryogenic Machining Process Incorporating the Phase Transformation of Ti-6Al-4V[J]. International Journal of Advanced Manufacturing Technology, 2018, 96(1/4):1293-1304.
[40]BERMINGHAM M J, KIRSCH J, SUN S, et al. New Observations on Tool Life, Cutting Forces and Chip Morphology in Cryogenic Machining Ti-6Al-4V[J]. International Journal of Machine Tools and Manufacture, 2011, 51(6):500-511.
[41]HONG S Y, DING Y, JEONG W C. Friction and Cutting Forces in Cryogenic Machining of Ti-6Al-4V[J]. International Journal of Machine Tools and Manufacture, 2001, 41(15):2271-2285.
[42]ELANCHEZHIA N J, KUMAR M P. Effect of Nozzle Angle and Depth of Cut on Grinding Titanium under Cryogenic CO2[J]. Materials and Manufacturing Processes, 2018, 33(13):1466-1470.
[43]SUN S J, BRANDT M, PALANISAMY S, et al. Effect of Cryogenic Compressed Air on the Evolution of Cutting Force and Tool Wear during Machining of Ti-6Al-4V Alloy[J]. Journal of Materials Processing Technology, 2015, 221:243-254.
[44]RAHMAN M, KUMAR A S, SALAM M U, et al. Effect of Chilled Air on Machining Performance in End Milling[J]. International Journal of Advanced Manufacturing Technology, 2003, 21(10/11):787-795.
[45]宋文刚, 刘战强, 吕文军. 工件初始表面几何状态对铣削力及表面形貌的影响[J]. 工具技术, 2021, 55(7):28-32.
SONG Wengang, LIU Zhanqiang, LYU Wenjun. Influence of Initial Surface Geometric States of Workpiece on Milling Force and Surface Topography[J]. Tool Engineering, 2021, 55(7):28-32.
[46]SIVALINGAM V, SUN J, YANG B, et al. Machining Performance and Tool Wear Analysis on Cryogenic Treated Insert during End Milling of Ti-6Al-4V Alloy[J]. Journal of Manufacturing Processes, 2018, 36:188-196.
[47]SARTORI S, GHIOTTI A, BRUSCHI S. Hybrid Lubricating/Cooling Strategies to Reduce the Tool Wear in Finishing Turning of Difficult-to-cut Alloys[J]. Wear, 2017, 376:107-114.
[48]姜增辉, 陈荣葛, 王书利, 等. 切削参数对高强度钢切削温度影响的仿真研究[J]. 工具技术, 2021, 55(8):64-67.
JIANG Zenghui, CHEN Rongge, WANG Shuli, et al. Simulation Study on Influence of Cutting Parameters on Cutting Temperature of High Strength Steel[J]. Tool Engineering, 2021, 55(8):64-67.
[49]YILDIRIM C V. Experimental Comparison of the Performance of Nanofluids, Cryogenic and Hybrid Cooling in Turning of Inconel625[J]. Tribology International, 2019, 137:366-378.
[50]YIN Q A, LI C H, DONG L, et al. Effects of the Physicochemical Properties of Different Nanoparticles on Lubrication Performance and Experimental Evaluation in the NMQL Milling of Ti-6Al-4V[J]. International Journal of Advanced Manufacturing Technology, 2018, 99(9/12):3091-3109.
[51]BAGHERZADEH A, BUDAK E. Investigation of Machinability in Turning of Difficult-to-cut Materials Using a New Cryogenic Cooling Approach[J]. Tribology International, 2018, 119:510-520.
[52]ZOU L, HUANG Y, ZHOU M, et al. Effect of Cryogenic Minimum Quantity Lubrication on Machinability of Diamond Tool in Ultraprecision Turning of 3Cr2NiMo Steel[J]. Materials and Manufacturing Processes, 2018, 33(9):943-949.
[53]关集俱, 刘德利, 王勇, 等. MWCNTs复合物纳米流体的摩擦学性能[J]. 摩擦学学报, 2020, 40(3):289-298.
GUAN Jiju, LIU Deli, WANG Yong, et al. Tribological Properties of Nanofluids in MWCNTs Composites[J]. Tribology, 2020, 40(3):289-298.
[54]DAMIR A, SHI B, ATTIA M H. Flow Characteristics of Optimized Hybrid Cryogenic Minimum Quantity Lubrication Cooling in Machining of Aerospace Materials[J]. CIRP Annals—Manufacturing Technology, 2019, 68(1):77-80.
[55]MEHTA A, HEMAKUMAR S, PATIL A, et al. Influence of Sustainable Cutting Environments on Cutting Forces, Surface Roughness and Tool Wear in Turning of Inconel 718[J]. Materials Today:Proceedings, 2018, 5(2):6746-6754.
[56]PARK K H, SUHAIMI M A, YANG G D, et al. Milling of Titanium Alloy with Cryogenic Cooling and Minimum Quantity Lubrication (MQL)[J]. International Journal of Precision Engineering and Manufacturing, 2017, 18(1):5-14.
[57]PEREIRA O, CELAYA A, URBIKAIN G, et al. CO2 Cryogenic Milling of Inconel718:Cutting Forces and Tool Wear[J]. Journal of Materials Research and Technology, 2020, 9(4):8459-8468.
[58]PUSAVEC F, STERLE L, KALIN M, et al. Tribology of Solid-lubricated Liquid Carbon Dioxide Assisted Machining[J]. CIRP Annals—Manufacturing Technology, 2020, 69(1):69-72.
[59]PAUL S, CHATTOPADHYAY P P, CHATTOPADHYAY A B. Effects of Cryo-cooling in Grinding Steels[J]. Journal of Materials Processing Technology, 1993, 37(1/4):791-800.
[60]FREDJ N B, SIDHOM H. Effects of the Cryogenic Cooling on the Fatigue Strength of the AISI 304 Stainless Steel Ground Components[J]. Cryogenics, 2006, 46(6):439-448.
[61]MANIMARAN G, KUMAR M P, VENKATASAMY R. Influence of Cryogenic Cooling on Surface Grinding of Stainless Steel 316[J]. Cryogenics, 2014, 59:76-83.
[62]REDDY P P, GHOSH A. Some Critical Issues In Cryo-grinding by a Vitrified Bonded Alumina Wheel Using Liquid Nitrogen Jet[J]. Journal of Materials Processing Technology, 2016, 229:329-337.
[63]SONI S K, SINGH V, SAHOO A K, et al. Improvement in Grinding of Composite Ceramic by Using Cryogenic Cooling Technique[J]. International Journal of Manufacturing Technology and Management, 2012, 23(1/3):60-77.
[64]AN Q L, FU Y C, XU J H. Research on Cryogenic Pneumatic Mist Jet Impinging Cooling and Lubricating of Grinding Processes[J]. Key Engineering Materials, 2008, 359/360:460-464.
[65]ZHANG J C, LI C H, ZHANG Y B, et al. Experi-mental Assessment of an Environmentally Friendly Grinding Process Using Nanofluid Minimum Quantity Lubrication with Cryogenic Air[J]. Journal of Cleaner Production, 2018, 193:236-248.
[66]ZHANG J C, WU W T, LI C H, et al. Convective Heat Transfer Coefficient Model under Nanofluid Minimum Quantity Lubrication Coupled with Cryogenic Air Grinding Ti-6Al-4V[J]. International Journal of Precision Engineering and Manufacturing—Green Technology, 2021, 8(4):1113-1135.
[67]WANG Y G, LI C H, ZHANG Y B, et al. Experimental Evaluation on Tribological Performance of the Wheel/Workpiece Interface in Minimum Quantity Lubrication Grinding with Different Concentrations of Al2O3 Nanofluids[J]. Journal of Cleaner Production, 2017, 142:3571-3583.
[68]STACHURSKI W, SAWICKI J, WOJCIK R, et al. Influence of Application of Hybrid MQL-CCA Method of Applying Coolant during Hob Cutter Sharpening on Cutting Blade Surface Condition[J]. Journal of Cleaner Production, 2018, 171:892-910.
[69]张彦彬, 李长河, 贾东洲, 等. MoS2/CNTs混合纳米流体微量润滑磨削加工表面质量试验评价[J]. 机械工程学报, 2018, 54(1):161-170.
ZHANG Yanbin, LI Changhe, JIA Dongzhou, et al. Experimental Evaluation of the Workpiece Surface Quality of MoS2/CNT Nanofluid for Minimal Quantity Lubrication in Grinding[J]. Journal of Mechanical Engineering, 2018, 54(1):161-170.
[70]DONG L, LI C H, ZHOU F M, et al. Temperature of the 45 Steel in the Minimum Quantity Lubricant Milling with Different Biolubricants[J]. International Journal of Advanced Manufacturing Technology, 2021, 113(9/10):2779-2790.
[71]TOUGGUI Y, UYSAL A, EMIROGLU U, et al. Evaluation of MQL Performances Using Various Nanofluids in Turning of AISI 304 Stainless Steel[J]. International Journal of Advanced Manufacturing Technology, 2021, 115(11/12):3983-3997.
[72]DUAN Z J, LI C H, ZHANG Y B, et al. Milling Surface Roughness for 7050 Aluminum Alloy Cavity Influenced by Nozzle Position of Nanofluid Minimum Quantity Lubrication[J]. Chinese Journal of Aeronautics, 2021, 34(6):33-53.
[73]KARABULUT S, BILGIN M. Friction Drilling of AA7075-T6 and AZ31B Alloys under Dry and Oil Containing Ceramic Particulates[J]. Journal of Manufacturing Processes, 2021, 65:70-79.
[74]SCHOOP J, SALES W F, JAWAHIR I S. High Speed Cryogenic Finish Machining of Ti-6Al-4V with Polycrystalline Diamond Tools[J]. Journal of Materials Processing Technology, 2017, 250:1-8.
[75]GUPTA M K, SONG Q H, LIU Z Q, et al. Experimental Characterisation of the Performance of Hybrid Cryo-lubrication Assisted Turning of Ti-6Al-4V Alloy[J]. Tribology International, 2021, 153:106582.
[76]GAJRANI K K. Assessment of Cryo-MQL Environment for Machining of Ti-6Al-4V[J]. Journal of Manufacturing Processes, 2020, 60:494-502.
[77]GUPTA M K, SONG Q H, LIU Z Q, et al. Ecological, Economical and Technological Perspectives Based Sustainability Assessment in Hybrid-cooling Assisted Machining of Ti-6Al-4V Alloy[J]. Sustainable Materials and Technologies, 2020, 26:e00218.
[78]DANISH M, GUPTA M K, RUBAIEE S, et al. Influence of Hybrid Cryo-MQL Lubri-cooling Strategy on the Machining and Tribological Characteristics of Inconel718[J]. Tribology International, 2021, 163:107178.
[79]CETINDAG H A, CICEK A, UCAK N. The Effects of Cryo-MQL Conditions on Tool Wear and Surface Integrity in Hard Turning of AISI 52100 Bearing Steel[J]. Journal of Manufacturing Processes, 2020, 56:463-473.
[80]PEREIRA O, RODRIGUEZ A, FERNANDEZ A A I, et al. Cryogenic and Minimum Quantity Lubrication for an Eco-efficiency Turning of AISI 304[J]. Journal of Cleaner Production, 2016, 139:440-449.
[81]COURBON C, STERLE L, CICI M, et al. Tribological Effect of Lubricated Liquid Carbon Dioxide on Ti-Al6-4V and AISI 1045 under Extreme Contact Conditions[J]. Procedia Manufacturing, 2020, 47:511-516.
[82]张慧萍, 靳杰, 王尊晶, 等. 低温微量润滑高速车削高强度钢表面质量研究[J]. 哈尔滨理工大学学报, 2019, 24(6):33-40.
ZHANG Huiping, JIN Jie, WANG Zunjing, et al. Study on the Machined Surface Quality in High Speed Turning High Strength Steel under Cryogenic Minimum Quantity Lubrication [J]. Journal of Harbin University of Science and Technology, 2019, 24(6):33-40.
[83]LIN H S, WANG C Y, YUAN Y H, et al. Tool Wear in Ti-6Al-4V Alloy Turning under Oils on Water Cooling Comparing with Cryogenic Air Mixed with Minimal Quantity Lubrication[J]. International Journal of Advanced Manufacturing Technology, 2015, 81(1/4):87-101.
[84]LAI Z W, WANG C Y, ZHENG L J, et al. Effect of Cryogenic Oils-on-water Compared with Cryogenic Minimum Quantity Lubrication in Finishing Turning of 17-4PH Stainless Steel[J]. Machining Science and Technology, 2020, 24(6):1016-1036.
[85]贺爱东, 叶邦彦, 王子媛. 低温微量润滑切削304不锈钢的实验研究[J]. 润滑与密封, 2015, 40(6):100-103.
HE Aidong, YE Bangyan, WANG Ziyuan. Experi-mental Study on Cryogenic Minimal Quantity Lubrication Cutting 304 Stainless Steel[J]. Lubrication Engineering, 2015, 40(6):100-103.
[86]MULYANA T, ABD R E, YAHAYA S N M. The Influence of Cryogenic Supercritical Carbon Dioxide Cooling on Tool Wear during Machining High Thermal Conductivity Steel[J]. Journal of Cleaner Production, 2017, 164:950-962.
[87]WIKA K K, LITWA P, HITCHENS C. Impact of Supercritical Carbon Dioxide Cooling with Minimum Quantity Lubrication on Tool Wear and Surface Integrity in the Milling of AISI 304L Stainless Steel[J]. Wear, 2019, 426:1691-1701.
[88]CAI C Y, LIANG X, AN Q L, et al. Cooling/Lubrication Performance of Dry and Supercritical CO2-based Minimum Quantity Lubrication in Peripheral Milling Ti-6Al-4V[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, 8(2):405-421.
[89]ZHANG S, LI J F, WANG Y W. Tool Life and Cutting Forces in End Milling Inconel 718 under Dry and Minimum Quantity Cooling Lubrication Cutting Conditions[J]. Journal of Cleaner Production, 2012, 32:81-87.
[90]袁松梅, 刘伟东, 严鲁涛. 低温微量润滑技术铣削高强钢的试验研究[J]. 航空制造技术, 2011(5):43-45.
YUAN Songmei, LIU Weidong, YAN Lutao. Experimental Study on Milling High-strength Steel with CA-MQL Technology[J]. Aeronautical Manu-facturing Technology, 2011(5):43-45.
[91]王晓铭, 张建超, 王绪平, 等. 冷风微量润滑纳米粒子体积分数对钛合金磨削性能的影响[J]. 金刚石与磨料磨具工程, 2020, 40(5):23-29.
WANG Xiaoming, ZHANG Jianchao, WANG Xuping, et al. Effect of Nanoparticle Volume on Grinding Performance of Titanium Alloy in Cryogenic Air Minimum Quantity Lubrication[J]. Diamond and Abrasives Engineering, 2020, 40(5):23-29.
[92]王晓铭, 张建超, 王绪平, 等. 不同冷却工况下的磨削钛合金温度场模型及验证[J]. 中国机械工程, 2021, 32(5):572-578.
WANG Xiaoming, ZHANG Jianchao, WANG Xuping, et al. Temperature Field Model and Verification of Titanium Alloy Grinding under Different Cooling Conditions[J]. China Mechanical Engineering, 2021, 32(5):572-578.
[93]BALAN A S S, VIJAYARAGHAVAN L, KRISHNAMURTHY R, et al. An Experimental Assessment on the Performance of Different Lubrication Techniques in Grinding of Inconel751[J]. Journal of Advanced Research, 2016, 7(5):709-718.
[94]GAO X X, ZENG W D, MA H Y, et al. The Origin of Coarse Macrograin during Thermo-mechanical Processing in a High Temperature Titanium Alloy[J]. Journal of Alloys and Compounds, 2019, 775:589-600.
[95]何朕, 李国和, 孙勇, 等. 钛合金高速切削加工试验研究进展[J]. 工具技术, 2021, 55(8):11-23.
HE Zhen, LI Guohe, SUN Yong, et al. Experimental Research Progress of High Speed Cutting of Titanium Alloy[J]. Tool Engineering, 2021, 55(8):11-23.
[96]UMBRELLO D, MICARI F, JAWAHIR I S. The Effects of Cryogenic Cooling on Surface Integrity in Hard Machining:a Comparison with Dry Machining[J]. CIRP Annals—Manufacturing Technology, 2012, 61(1):103-106.
[97]ROTELLA G, DILLON O W, UMBRELLO D, et al. The Effects of Cooling Conditions on Surface Integrity in Machining of Ti-6Al-4V Alloy[J]. International Journal of Advanced Manufacturing Technology, 2014, 71(1/4):47-55.
[98]李钦奉, 宋霄, 李辉, 等. 镍基高温合金车削热通量模型研究[J]. 机床与液压, 2020, 48(15):166-170.
LI Qinfeng, SONG Xiao, LI Hui, et al. Research on the Turning Heat Flux Model of Nickel-based Superalloy[J]. Machine Tool and Hydraulics, 2020, 48(15):166-170.
[99]狄成宽, 黄树涛, 于晓琳, 等. 刀具材料对切削AF1410高强度钢温度场的影响[J]. 兵器装备工程学报, 2021, 42(6):243-250.
DI Chengkuan, HUANG Shutao, YU Xiaolin, et al. Effect of Cutting Tool Materials on Temperature Field of Cutting AF1410 High Strength Steel[J]. Journal of Ordnance Equipment Engineering, 2021, 42(6):243-250.