为满足楔横轧工艺研究的需要,推动板式楔横轧机在我国的应用与发展,中国科学院金属研究所与白俄罗斯科学院物理技术研究所共同开展了高精度板式楔横轧机(IM500)的研制工作。IM500轧机采用卧式水平结构和液压驱动的单板可动设计方案,由主体机械结构、液压站、电控柜三部分组成。在主体机械结构方案设计过程中,采用有限元模拟方法进行同步校核优化。在IM500轧机上,分别采用45钢、GH4169、TC11三种材料进行楔横轧实验。结果表明该轧机具有轧件尺寸精度高、维护和更换零部件方便、自动化程度高等突出优点。
In order to meet the needs of CWR technology research and to promote the applications and development of the flat CWR mill in China, a high precision flat CWR mill(IM500) was developed by the cooperation of Institute of Metal Research, Chinese Academy of Sciences(IMR, CAS) and Physical-Technical Institute of the National Academy of Sciences of Belarus(PhTI NAS B). IM500 was designed with horizontal structure. Single movable plate was drive by hydraulic. Three sections including the body structure, hydraulic station and electric control subsystem were integrated in IM500 mill. The finite element simulation method was used simultaneously to check and optimize during design of the body structure. The billets of 45 steel, GH4169 and TC11 were used for CWR experiments with IM500 mill. The experimental results show that the high dimensional accuracy of rolled parts may be manufactured by the mill. It may be operated and repaired easily and more automation technologies may be used widely.
[1]胡正寰, 张康生, 王宝雨, 等. 楔横轧零件成形技术与模拟仿真[M]. 北京:冶金工业出版社, 2004.
HU Zhenghuan, ZHANG Kangsheng, WANG Baoyu, et al. Technology and Simulation of Part Rolling by Cross Wedge Rolling[M]. Beijing:Metallurgical Industry Press, 2004.
[2]张庆生. 国外楔横轧情况及工艺参数[J]. 锻压技术, 1979, 4(3):3-24.
ZHANG Qingsheng. Situation and Process Parameters of Cross Wedge Rolling Abroad[J]. Forging & Stamping Technology, 1979, 4(3):3-24.
[3]胡正寰. 斜轧与楔横轧在我国的发展与应用[J]. 锻压技术, 1979, 4(5):38-47.
HU Zhenghuan. Development and Application of Cross Rolling and Cross Wedge Rolling in China[J]. Forging & Stamping Technology, 1979, 4(5):38-47.
[4]魏伊伦, 束学道, 王雨, 等. 模具参数对闭开联合轧制汽车油泵轴力能参数的影响[J]. 中国机械工程, 2017, 28(10):1238-1244.
WEI Yilun, SHU Xuedao, WANG Yu, et al. Influences of Mold Parameters on Mechanics Parameters in Closed-open Type Cross Wedge Rolling of Automobile Oil Pump Shaft Part[J]. China Mechanical Engineering, 2017, 28(10):1238-1244.
[5]束学道, VALERY Y S, 孙宝寿, 等. 楔横轧理论与成形技术[M]. 北京:科学出版社, 2014.
SHU Xuedao, VALERY Y S, SUN Baoshou, et al. Cross Wedge Rolling Theory and Forming Technology[M]. Beijing:Science Press, 2014.
[6]张士宏, 程明, 宋鸿武, 等. 航空航天复杂曲面构件精密成形技术的研究进展[J]. 南京航空航天大学学报, 2020, 52(1):1-11.
ZHANG Shihong, CHENG Ming, SONG Hongwu, et al. Research Progress on Precision Forming Technology for Complex Curved Surface Components in Aerospace[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2020, 52(1):1-11.
[7]袁文生, 马洪芳, 段辉, 等. 楔横轧设备的发展与应用[J]. 山东建筑大学学报, 2005, 20(3):80-85.
YUAN Wensheng, MA Hongfang, DUAN Hui, et al. Advanced and Application of Cross Wedge Rolling Equipment[J]. Journal of Shandong Institute of Architecture and Engineering, 2005, 20(3):80-85.
[8]瓦列里·雅科夫列维奇·休金, 格拉日娜·瓦列里耶夫娜·科热夫尼娃. 板式楔横轧工艺及装备[J]. 锻压技术, 2009, 34(6):1-7.
SHCHUKIN V Y, KOZHEVNIKOVA G V. Technics and Equipment of Flat Wedge Cross-wedge Rolling[J]. Forging & Stamping Technology, 2009, 34(6):1-7.
[9]王光泽, 房希臣, 王光旭, 等. 平板楔横轧机:中国, CN94110650. 0[P]. 1995-06-14.
WANG Guangze, FANG Xichen, WANG Guangxu, et al. A Plate Cross Wedge Rolling Mill:China, CN94110650. 0[P]. 1995-06-14.
[10]宋明正. 卧式平板楔横轧机[J]. 锻压装备与制造技术, 2000, 35(5):26.
SONG Mingzheng. Horizontal Plate Cross Wedge Rolling Mill[J]. China Metal Foring Equipment & Manufacturing Technology, 2000, 35(5):26.
[11]姜守厚. 埃尔福特公司和板式楔横轧机简介[J]. 锻压技术, 1979, 4(2):57-60.
JIANG Shouhou. Introduction to Erfurt Company and Plate Cross Wedge Rolling Mill[J]. Forging & Stamping Technology, 1979, 4(2):57-60.
[12]KOZHEVNIKOVA G V. Cross-wedge Rolling[M]. Minsk:Belorusskaya Nauka, 2012.
[13]胡正寰, 蒋家龙, 朱超甫. 楔横轧机的选型问题[J]. 锻压机械, 1985, 20(5):14-25.
HU Zhenghuan, JIANG Jialong, ZHU Chaofu. Selection of Cross Wedge Rolling Mill[J]. China Metal Foring Equipment & Manufacturing Technology, 1985, 20(5):14-25.
[14]沈瑞宏, 颜华, 薛永贵. 链同步平板式楔横轧机[J]. 锻压机械, 1997, 32(1):30-31.
SHEN Ruihong, YAN Hua, XUE Yonggui. Chain Synchronous Plate Cross Wedge Rolling Mill[J]. China Metal Foring Equipment & Manufacturing Technology, 1997, 32(1):30-31.
[15]宋玉泉, 王明辉, 李志刚. 单向连续板式楔横轧机[J]. 中国科学:技术科学, 2010, 40(1):1-4.
SONG Yuquan, WANG Minghui, LI Zhigang. One-way Successive Plate Cross Wedge Rolling Machine[J]. Sci. China Ser. E—Tech. Sci., 2010, 40(1):1-4.
[16]宋玉泉, 李志刚, 王明辉, 等. 辊压板式复合楔横轧精成形机[J]. 中国科学:技术科学, 2009, 39(10):1631-1634.
SONG Yuquan, LI Zhigang, WANG Minghui, et al. Precision Forming Machine with Rolling Plate Cross Wedge Rolling[J]. Sci. China Ser. E—Tech. Sci., 2009, 39(10):1631-1634.
[17]宋玉泉, 李志刚, 王明辉, 等. 可调板式楔横轧机[J]. 中国机械工程, 2007, 18(1):4-7.
SONG Yuquan, LI Zhigang, WANG Minghui, et al. Adjustable Flat Wedge Cross Rolling Machine[J]. China Mechanical Engineering, 2007, 18(1):4-7.
[18]TOMCZAK J, PATER Z, BULZAK T. The Flat Wedge Rolling Mill for Forming Balls from Heads of Scrap Railway Rails[J]. Arch. Metall. Mater., 2018, 63(1):5-12.
[19]束学道, 程超, 龚文炜, 等. 挤压式楔横轧小料头轧制的微观组织演变分析[J]. 中国机械工程, 2013, 24(15):2109-2113.
SHU Xuedao, CHENG Chao, GONG Wenwei, et al. Analysis of Microstructure Evolution of Extruded Cross Wedge Rolling for Small Remnant Rolling[J]. China Mechanical Engineering, 2013, 24(15):2109-2113.
[20]贾震, 张康生, 胡正寰. 楔横轧一次楔成形汽车中间轴毛坯可行性分析[J]. 中国机械工程, 2008, 19(23):2876-2879.
JIA Zhen, ZHANG Kangsheng, HU Zhenghuan. Feasibility Study on Single Wedge Cross Wedge Rolling of Semifinished Product of Automotive Middle Shaft[J]. China Mechanical Engineering, 2008, 19(23):2876-2879.
[21]BULZAK T, TOMCZAK J, PATER Z, et al. A Comparative Study of Helical and Cross-wedge Rolling Processes for Producing Ball Studs[J]. Materials, 2019, 12(18):ma12182887.
[22]KOZHEVNIKOVA G V, CHENG Ming. Research of the Forming Manufacturing Process Produced from Nickel and Titanium Alloys under the Superplasticity Conditions[C]∥Advanced Methods and Technologies of Materials Development and Processing. Minsk, 2020.
[23]甘洪岩, 程明, 宋鸿武, 等. GH4169 合金楔横轧微观组织演变及动态再结晶机制[J]. 稀有金属材料与工程, 2019, 48(11):144-150.
GAN Hongyan, CHENG Ming, SONG Hongwu, et al. Microstructure Evolution and Dynamic Recrystallization Mechanism of GH4169 Alloy during Cross Wedge Rolling[J]. Journal of Rare Metal Materials and Engineering, 2019, 48(11):144-150.
[24]GAN Hongyan, CHENG Ming, Guo Zhenxing, et al. Spheroidization Mechanism of Lamellar δ Phase in Delta Process of Inconel 718 Alloy[J]. Journal of Materials Engineering and Performance, 2020, 29:3852-3857.
[25]甘洪岩. GH4169合金航空叶片楔横轧制坯心部缺陷及组织调控机理[D]. 合肥:中国科学技术大学, 2020.
GAN Hongyan. Core Defects and Microstructure Control Mechanism for GH4169 Alloy Aero-blade Billet Subjected to Cross Wedge Rolling[D]. Hefei:University of Science and Technology of China, 2020.
[26]CHENG Ming, SHI Mingjie, VLADIMIR P, et al. Novel Evaluation Method for Metal Workability during Cross Wedge Rolling Process[J]. Advances in Manufacturing, 2021,9(1):473-481.