机械基础工程

基于子结构法的多层级结构拓扑优化

展开
  • 1.三峡大学机械与动力学院,宜昌,443002 
    2.华中科技大学数字制造装备与技术国家重点实验室,武汉,430074
付君健,男,1987年生,讲师。研究方向为结构拓扑优化。E-mail:fjj@ctgu.edu.cn。

收稿日期: 2020-08-21

  网络出版日期: 2021-08-26

基金资助

国家自然科学基金(51775308)

Hierarchical Structure Topology Optimization Based on Substructure Method

Expand
  • 1.College of Mechanical & Power Engineering,China Three Gorges University,Yichang,Hubei,443002
    2.State Key Laboratory of Digital Manufacturing Equipment and Technology,Huazhong University of Science and Technology,Wuhan,430074

Received date: 2020-08-21

  Online published: 2021-08-26

摘要

为避免多层级结构拓扑优化中的尺度分离问题,保证不同多孔结构之间的连接性,提出了一种基于子结构法的多层级结构拓扑优化方法。采用参数化水平集方法,将多孔结构拓扑优化分为两个层级,在细观层级优化多孔结构拓扑构型,在宏观层级优化多孔结构最优空间分布。采用子结构法建立宏细观结构之间的联系,将细观结构凝聚为超单元,凝聚的超单元又作为宏观结构分析和优化的基本单元。数值算例表明:所提方法可有效实现二维、三维多层级结构的拓扑优化;在多层级结构设计中考虑多种类型的多孔结构时,所提方法能有效保证不同多孔结构之间的连接性。

本文引用格式

付君健, 孙鹏飞, 杜义贤, 田启华, 高亮 . 基于子结构法的多层级结构拓扑优化[J]. 中国机械工程, 2021 , 32(16) : 1937 -1944,1951 . DOI: 10.3969/j.issn.1004-132X.2021.16.006

Abstract

To avoid the separation of scales in the hierarchical structures topology optimization, and to maintain the connection between different cellular structures, a hierarchical structure topology optimization method was proposed based on the substructure method.  The topology optimization of cellular structures was divided into two hierarchies with the parametric level set method. The topology configuration of the cellular structure was optimized in meso-hierarchy. The spatial distribution of the cellular structure was optimized in macro-hierarchy. The relationship between macro-structure and meso-structure was established using the substructure method. The meso-structures was condensed into a super element, which was then used as the basic element of macro-structures for the structural analysis and optimization. Numerical examples show that the proposed method is effective for the 2D and 3D hierarchical structure topology optimization. The proposed method may effectively guarantee the connection between different cellular structures when considering multiple types of cellular structures in the hierarchical structure design.

参考文献

[1]XIA L. Multiscale Structural Topology Optimization[M].Oxford:Elsevier, 2016.

[2]LIU L, YAN J, CHENG G. Optimum Structure with Homogeneous Optimum Truss-like Material[J]. Computers & Structures, 2008, 86(13/14):1417-1425.

[3]NIU B, YAN J, CHENG G. Optimum Structure with Homogeneous Optimum Cellular Material for Maximum Fundamental Frequency[J]. Structural and Multidisciplinary Optimization, 2009, 39(2):115-132.

[4]YAN J, CHENG G, LIU L. A Uniform Optimum Material Based Model for Concurrent Optimization of Thermoelastic Structures and Materials[J]. International Journal for Simulation and Multidisciplinary Design Optimization, 2008, 2(4):259-266.

[5]VICENTE W, ZUO Z, PAVANELLO R, et al. Concurrent Topology Optimization for Minimizing Frequency Responses of Two-level Hierarchical Structures[J]. Computer Methods in Applied Mechanics and Engineering, 2016, 301:116-136.

[6]ZHANG W, SUN S. Scale-related Topology Optimization of Cellular Materials and Structures[J]. International Journal for Numerical Methods in Engineering, 2006, 68(9):993-1011.

[7]孙士平. 材料和结构的拓扑优化关键理论与方法研究[D]. 西安:西北工业大学, 2006.

SUN Shiping.Investigation on the Key Theory and Methods of Topology Optimization of Materials and Structures[D]. Xi'an:Northwestern Polytechnical University, 2006.

[8]LI H, LUO Z, ZHANG N, et al. Integrated Design of Cellular Composites Using a Level-set Topology Optimization Method[J]. Computer Methods in Applied Mechanics and Engineering, 2016, 309:453-475.

[9]LI H, LUO Z, GAO L, et al. Topology Optimization for Functionally Graded Cellular Composites with Metamaterials by Level Sets[J]. Computer Methods in Applied Mechanics and Engineering, 2018, 328:340-364.

[10]SIVAPURAM R, DUNNING P D, KIM H A. Simultaneous Material and Structural Optimization by Multiscale Topology Optimization[J]. Structural and Multidisciplinary Optimization, 2016, 54(5):1267-1281.

[11]LI H, LUO Z, GAO L, et al. Topology Optimization for Concurrent Design of Structures with Multi-patch Microstructures by Level Sets[J]. Computer Methods in Applied Mechanics and Engineering, 2018, 331:536-561.

[12]GAO J, LUO Z, LI H, et al. Topology Optimization for Multiscale Design of Porous Composites with Multi-domain Microstructures[J]. Computer Methods in Applied Mechanics and Engineering, 2019, 344:451-476.

[13]SCHURY F, STINGL M, WEIN F. Efficient Two-scale Optimization of Manufacturable Graded Structures[J]. SIAM Journal on Scientific Computing, 2012, 34(6):B711-B733.

[14]XIA L, BREITKOPF P. Multiscale Structural Topology Optimization with an Approximate Constitutive Model for Local Material Microstructure[J]. Computer Methods in Applied Mechanics and Engineering, 2015, 286:147-167.

[15]XIA L, BREITKOPF P. Concurrent Topology Optimization Design of Material and Structure within FE2 Nonlinear Multiscale Analysis Framework[J]. Computer Methods in Applied Mechanics and Engineering, 2014, 278:524-542.

[16]WANG Y, CHEN F, WANG M Y. Concurrent Design with Connectable Graded Microstructures[J]. Computer Methods in Applied Mechanics and Engineering, 2017, 317:84-101.

[17]孙士平, 刘宇锋. 周期性圆环结构的拓扑优化设计[J]. 机械设计与制造, 2014(10):12-14.

SUN Shiping, LIU Yufeng. Topology Optimization Design of Periodical Ring Structure[J]. Machinery Design & Manufacture, 2014(10):12-14.

[18]FU J, XIA L, GAO L, et al. Topology Optimization of Periodic Structures with Substructuring[J]. Journal of Mechanical Design, 2019, 141(7):071403.

[19]WU Z, XIA L, WANG S, et al. Topology Optimization of Hierarchical Lattice Structures with Substructuring[J]. Computer Methods in Applied Mechanics and Engineering, 2019, 345:602-617.

[20]OSHER S, FEDKIW R. Level Set Methods and Dynamic Implicit Surfaces[M]. New York:Springer, 2006.

[21]LUO Z, TONG L, KANG Z. A Level Set Method for Structural Shape and Topology Optimization Using Radial Basis Functions[J]. Computers & Structures, 2009, 87(7):425-434.

[22]WANG S, WANG M Y. Radial Basis Functions and Level Set Method for Structural Topology Optimization[J]. International Journal for Numerical Methods in Engineering, 2010, 65(12):2060-2090.

[23]WEI P, LI Z, LI X, et al. An 88-line MATLAB Code for the Parameterized Level Set Method Based Topology Optimization Using Radial Basis Functions[J]. Structural and Multidisciplinary Optimization, 2018, 58(2):831-849.

[24]GUYAN R J. Reduction of Stiffness and Mass Matrices[J]. AIAA Journal, 1965, 3(2):380-389.

[25]SAAD Y. Iterative Methods for Sparse Linear Systems[M].Philadelphia:SIAM, 2003.

[26]李昂, 刘初升. 基于超单元技术的大型复杂结构的拓扑优化设计[J]. 中国机械工程, 2017, 28(20):2467-2474.

LI Ang, LIU Chusheng. Topology Optimization Designs of Large and Complex Structures Based on Super Element Technique [J]. China Mechanical Engineering, 2017, 28(20):2467-2474.

[27]WANG M Y, WANG X, GUO D. A Level Set Method for Structural Topology Optimization[J]. Computer Methods in Applied Mechanics and Engineering, 2003, 192(1/2):227-246.

[28]ALLAIRE G, JOUVE F, TOADER A M. Structural Optimization Using Sensitivity Analysis and a Level-set Method[J]. Journal of Computational Physics, 2004, 194(1):363-393.

[29]ZHOU M, ROZVANY G I N. The COC Algorithm, Part Ⅱ:Topological, Geometry and Generalized Shape Optimization[J]. Computer Methods in Applied Mechanics & Engineering, 2015, 89(1/3):309-336.
文章导航

/

〈 〉