为提高翅片区域的换热效率、改善板翅式换热器的整体换热性能,提出了一种新型微凸翅片结构。基于结构参数多采样点处的热力学性能仿真结果构建近似模型,以翅片热功率最高为优化目标、压降为约束,使用序列二次规划法确定了微凸体结构参数(微凸高度、微凸夹角、微凸开口长度)的最优值;对微凸体排列间距、排列方式进行优化,确定了改进微凸翅片结构的具体参数值。通过对翅片流道内温度场、压力场分析,以及与相同尺寸的平直翅片的换热性能对比,验证了所提出的新型微凸翅片结构的有效性。
In order to improve heat transfer efficiency in fin regions and the overall heat transfer performance of plate-fin heat exchangers, a new micro convex fin structure was proposed. An approximate model was constructed based on the simulation results of thermodynamic performance at multiple sampling points of the structure parameters. With the total heat transfer rate as optimization objective and the pressure drop as the constraint, the optimum structure parameters (micro convex height, micro convex angle, micro convex opening length) of micro convex were determined by using sequential quadratic programming algorithm. And the arrangement spaces and arrangement type of micro convex were optimized to determine the specific parameters of improved micro convex fin structures. Through the temperature and pressure field analysis of fin channels, and the comparison of heat transfer performance with the same size of straight fin, the effectiveness of the new micro convex fin structure was verified.
[1]RAO R A, SAROJ A, OCLON' P, et al. Design Optimization of Heat Exchangers with Advanced Optimization Techniques:a Review[J]. Archives of Computational Methods in Engineering, 2020, 27:517-548.
[2]崔娜,孙文超,谭春青,等. 基于燃气轮机的板翅式换热器特性分析及结构优化[J]. 动力工程学报,2019,39(11):884-892.
CUI Na, SUN Wenchao, TAN Chunqing, et al. Characteristic Analysis and Strucuture Optimization of the Plate-fin Heat Exchanger in a Gas Turbine[J]. Journal of Chinese Society of Power Engineering, 2019, 39(11):884-892.
[3]LIU C, BU W, XU D. Multi-objective Shape Optimization of a Plate-fin Heat Exchanger Using CFD and Multi-objective Genetic Algorithm[J]. International Journal of Heat and Mass Transfer, 2017, 111:65-82.
[4]王伟,陈亮,何富均. 板翅式换热器封头强度的分析设计研究[J]. 中国机械工程,2011,22(16):1988-1992.
WANG Wei, CHEN Liang, HE Fujun. Research on DBA of Strength for a Plate-fin Heat Exchanger Header[J]. China Mechanical Engineering, 2011, 22(16):1988-1992.
[5]HUANG C H, YUAN I C, AY H. An Experimental Study in Determining the Local Heat Transfer Coefficients for the Plate Finned-tube Heat Exchangers[J]. International Journal of Heat and Mass Transfer, 2009, 52(21/22):4883-4893.
[6]彭波涛,罗来勤,王秋旺,等. 多股流板翅式换热器的微分与优化数值研究[J]. 化工学报, 2004, 55(6):876-881.
PENG Botao, LUO Laiqin, WANG Qiuwang, et al. Numerical Study of Differential and Optimal Design for Multi-stream Plate-fin Heat Exchanger[J]. Journal of Chemical Industry and Engineering (China), 2004, 55(6):876-881.
[7]SAHA P, BISWAS G, SARKAR S. Comparison of Winglet-type Vortex Generators Periodically Deployed in a Plate-fin Heat Exchanger:a Synergy Based Analysis[J]. International Journal of Heat and Mass Transfer, 2014, 74:292-305.
[8]王威. 板翅式换热器双尺度锯齿翅片流动与传热性能研究[D]. 南京:东南大学,2014.
WANG Wei. Study on the Flow and Heat Transfer Performances of Double Scale Offset Fins of Plate-fin Heat Exchangers[D]. Nanjing:Southeast University, 2014.
[9]刘景成,张树有,周智勇. 板翅换热器流道结构改进与流体流动性能分析[J]. 机械工程学报,2014,50(18):167-176.
LIU Jingcheng, ZHANG Shuyou, ZHOU Zhiyong. Analysis of Channel Structure Improvement and Its Influence on Fluid Flow in Plate-fin Heat Exchanger[J]. Journal of Mechanical Engineering, 2014, 50(18):167-176.
[10]LI P, LUO Y, ZHANG D, et al. Flow and Heat Transfer Characteristics and Optimization Study on the Water-cooled Microchannel Heat Sinks with Dimple and Pin-fin[J]. International Journal of Heat and Mass Transfer, 2018, 119:152-162.
[11]ZENG S, KANARGI B, LEE P S. Experimental and Numerical Investigation of a Mini Channel Forced Air Heat Sink Designed by Topology Optimization[J]. International Journal of Heat and Mass Transfer, 2018, 121:663-679.
[12]邹中妃,何林,李家春,等. 传热结构摄动敏度分析及动态拓扑优化[J]. 中国机械工程,2017,28(10):1183-1190.
ZOU Zhongfei, HE Lin, LI Jiachun, et al. Perturbation Sensitivity Analysis and Dynamic Topology Optimization for Heat Transfer Structures[J]. China Mechanical Engineering, 2017,28(10):1183-1190.
[13]IBRAHIM T K, MOHAMMED M N, MOHAMMED M K, et al. Experimental Study on the Effect of Perforations Shapes on Vertical Heated Fins Performance under Forced Convection Heat Transfer[J]. International Journal of Heat and Mass Transfer, 2018, 118:832-846.
[14]刘景成,张树有,周智勇. 一种新型仿生翅片及其对流体流动与传热影响[J]. 机械工程学报,2015,51(12):161-169.
LIU Jingcheng, ZHANG Shuyou, ZHOU Zhi-yong. Influence on Fluid Flow and Heat Transfer of a Bionic Fin in Plate-fin Heat Exchanger[J]. Journal of Mechanical Engineering, 2015, 51(12):161-169.
[15]申锦荣. 三边安装三角形涡产生器矩形截面通道内流动与传热特性的数值研究[D]. 兰州:兰州交通大学,2016.
SHEN Jinrong. Numerical Study on the Flow and Heat Transfer Characteristics of Channel in Rectangular Cross Section with Triangular Vortex Generators Mounted on Three Sides[D]. Lanzhou:Lanzhou Jiaotong University, 2016.
[16]ANEESH A M, SHARMA A, SRIVASTAVA A, et al. Effects of Wavy Channel Configurations on Thermal-hydraulic Characteristics of Printed Circuit Heat Exchanger (PCHE)[J]. International Journal of Heat and Mass Transfer, 2018, 118:304-15.
[17]LI K, XU X, LI Z, et al. Air-side Heat Transfer Enhancement in Plate-fin Channel with an Airfoil-based Self-agitator [J]. International Journal of Heat and Mass Transfer, 2019, 128:715-27.
[18]WANG L, WANG S, WEN F, et al. Effects of Continuous Wavy Ribs on Heat Transfer and Cooling Air Flow in a Square Single-pass Channel of Turbine Blade[J]. International Journal of Heat and Mass Transfer, 2018, 121:514-33.
[19]喻茹. 规整填料及锯齿型错列翅片的优化研究[D]. 天津:天津大学, 2016.
YU Ru. Optimization Research on Structured Packing and Offset Strip Fin[D]. Tianjin:Tianjin University, 2016.