机械基础工程

制冷线性压缩机弹簧组件的设计与研究

展开
  • 1.辽宁工程技术大学机械工程学院,阜新,123000
    2.中国煤炭工业协会高端综采成套装备动力学测试与大数据分析中心,阜新,123000
    3.矿山液压技术与装备国家工程研究中心,阜新,123000
陈洪月,男,1982年生,教授。研究方向为机械系统结构优化设计。发表论文48篇。E-mail:chyxiaobao@126.com。

收稿日期: 2020-07-27

  网络出版日期: 2021-07-01

基金资助

国家自然科学基金(51874157);国家重点研发计划(2017YFC0804305);辽宁省自然科学基金(2019-MS-161);2019年度辽宁省高等学校创新人才(理)项目(LR2019030);辽宁工程技术大学创新领军团队(LNTU20TD-02)

Design and Research of Refrigeration Linear Compressor Spring Assembly

Expand
  • 1.College of Mechanical Engineering,Liaoning Technical University,Fuxin,Liaoning,123000
    2.Dynamic Research for High-end Complete Integrated Coal Mining Equipment and Big Data Analysis Center,China National Coal Association,Fuxin, Liaoning,123000
    3.Combined Mining Technology and Equipment Engineering National Research Center,Fuxin,Liaoning,123000

Received date: 2020-07-27

  Online published: 2021-07-01

摘要

为减小弹簧组件体积并满足制冷线性压缩机的刚度需求,设计出一种基于阿基米德螺线的圆柱臂盘簧。采用有限元分析方法对涡旋臂板弹簧和新型圆柱臂盘簧的径向与轴向的刚度变化、应力变化特性和等效质量进行了分析对比,对两种弹簧的轴向刚度特性进行了实验验证,并将新型圆柱臂盘簧用于弹簧组件。研究结果表明,圆柱臂盘簧具有较大的径向刚度和轴向刚度,且动态刚度恒定,改进后的弹簧组在提供较大轴向刚度的同时有效减小了弹簧组的体积和质量。

本文引用格式

陈洪月, 张站立, 林青竹 . 制冷线性压缩机弹簧组件的设计与研究[J]. 中国机械工程, 2021 , 32(12) : 1449 -1455 . DOI: 10.3969/j.issn.1004-132X.2021.12.008

Abstract

To reduce volume of spring assembly and meet stiffness requirements of refrigeration linear compressor, a cylindrical arm coil spring was designed based on spiral of Archimedes. Variation of radial and axial stiffness, stress characteristics, and equivalent mass of scroll arm plate spring, and a new type cylindrical arm coil spring were analyzed and compared by finite element analysis method. Axial stiffness characteristics of both type springs were verified experimentally, and the new type of cylindrical arm coil spring was applied to spring assembly. Research results show that the cylindrical arm coil spring has large radial stiffness, axial stiffness, and constant dynamic stiffness. The improved spring assembly provides greater axial stiffness and reduces volume and mass of spring assembly effectively. 

参考文献

[1]LIANG K. A Review of Linear Compressors for Refrigeration[J]. International Journal of Refrigeration, 2017,84: 253-273.
[2]BANSAL P, VINEYARD E, ABDELAZIZ O. Advances in Household Appliances—a Review[J]. Applied Thermal Engineering, 2011, 31:3748-3760.
[3]陈曦, 刘颖, 袁重雨, 等. 基于费马曲线的柔性弹簧的理论与试验研究[J]. 机械工程学报, 2011, 47(18):130-136. 
CHEN Xi,LIU Ying,YUAN Zhongyu,et al.Theory and Experimental Study on Flexure Spring Based Fermat Curve[J].Journal of Mechanical Engineering,2011,47(18):130-136.
[4]LEE C C, PAN R B. Flexure Bearing Analysis Procedures and Design Charts[M]. Boston:Springer, 1997.
[5]RAWLINGS R M, MISKIMINS M. Flexure Springs Applied to Low-cost Linear Drive Cryocoolers[M]∥Cryocoolers 11. Boston:Springer, 2002:103-110.
[6]TROLLIER T, RAVEX A, CRESPI P, et al. High Capacity Flexure Bearing Stirling Cryocooler On-board the ISS[M]∥Cryocoolers 12. Boston:Springer,2003:31-35.
[7]陈楠. 涡旋柔性弹簧型线设计及有限元分析[J]. 中国机械工程,2006, 17(12):1261-1265.
CHEN Nan. Design and Finite Element Analysis of Spiral Flexure Spring[J]. China Mechanical Engineering, 2006, 17(12):1261-1265.
[8]GAUNEKAR A S, GODDENHENRICH T, HEIDEN C. Finite Element Analysis and Testing of Flexure Bearing Elements[J]. Cryogenics, 1996,36:359-364.
[9]WONG T E, PAN R B, JOHNSON A L. Novel Linear Flexure Bearing[C]∥7th International Crycooler Conference. Santa Fe, 1993:675-698. 
[10]MARQUARDT E, RADEBAUGH R. Design Optimization of Linear-arm Flexure Bearing[M]∥Cryocoolers 8. Boston:Springer, 1993:293-304. 
[11]QIU S, ALLEN A, PETERSON. Flexure Design and Testing for STC Stirling Convertors[C]∥The 1st International Energy Conversion Engineering Conference. Portsmouth, Virginia, 2003:1-7. 
[12]陈楠. 大冷量斯特林制冷机用动磁式直线压缩机关键部件及整机性能研究[D]. 上海:上海交通大学, 2007.
CHEN Nan. Theoretical and Experimental Study of the Moving-magnet Linear Compressor Stirling Refrigerator with Large Cooling Capacity [D]. Shanghai:Shanghai Jiao Tong University, 2007.
[13]YAN P, CHEN G, et al. 15K Two-stage Stirling-type Pulse-tube Cryocooler[J]. Cryogenics, 2009,49(2):103-106.
[14]陈楠,陈曦,吴亦农,等. 涡旋柔性弹簧及组件性能实验研究[J]. 低温技术, 2005, 33(4):5-8.
CHEN Nan, CHEN Xi, WU Yinong, et al. Experimental Study on the Performance of Spiral Flexure Spring and Its Subassembly[J].Cryogenic, 2005, 33(4):5-8.
文章导航

/

〈 〉