工程前沿

大功率潜水电机冷却系统分析方法与试验研究

  • 张琦1 ,
  • 李增亮1 ,
  • 董祥伟1 ,
  • 刘延鑫1 ,
  • 王雨婷2
展开
  • 1.中国石油大学(华东)机电工程学院,青岛,266580
    2.中国石油海洋工程有限公司青岛分公司,青岛,266580
张琦,男,1988年生,博士研究生。研究方向为水下电机多物理场耦合与冷却系统。E-mail:zqcs123@163.com。

收稿日期: 2020-04-02

  网络出版日期: 2021-02-06

基金资助

工业和信息化部高技术船舶科研项目(2014020024)

Analysis Method and Experimental Research on Cooling System of High Power Submersible Motor

  • ZHANG Qi1 ,
  • LI Zengliang1 ,
  • DONG Xiangwei1 ,
  • LIU Yanxin1 ,
  • WANG Yuting2
Expand
  • 1.College of Mechanical Electronic Engineering,China University of Petroleum,Qingdao,Shandong,266580
    2.CNPC Offshore Engineering(Qingdao) Company Limited,Qingdao,Shandong,266580

Received date: 2020-04-02

  Online published: 2021-02-06

摘要

为了研究大功率潜水电机的温度分布规律,以580 kW潜水电机为例进行分析。依据工作条件建立温度场计算模型,实现流固耦合自动传热并可模拟内外冷却介质的流动;以定转子铁耗定值、油摩损耗和铜耗变量作为热源施加方式,基于冷却系统参数影响关系得到温度场与流场间双向耦合关系,由此提出一种冷却系统分析方法;采用该方法研究冷却系统结构参数影响规律,并对比不同叶轮工作特性下冷却系统计算结果以得到最优叶轮参数。室内空载试验和海边负载试验结果表明:铁耗和温度的试验值与仿真值间相对误差在5%以内,所设计冷却系统在不同负载下可稳定运行。

本文引用格式

张琦1 , 李增亮1 , 董祥伟1 , 刘延鑫1 , 王雨婷2 . 大功率潜水电机冷却系统分析方法与试验研究[J]. 中国机械工程, 2021 , 32(03) : 368 -377 . DOI: 10.3969/j.issn.1004-132X.2021.03.016

Abstract

In order to study the temperature distribution of high power submersible motors, a 580 kW submersible motor was calculated. The temperature field calculation model was established according to the working conditions. The automatic heat transfer was realized through configuring the fluid-structure interaction and the flows of internal and external cooling medium were simulated. The fixed values of iron loss of stator and rotor, the variable of oil friction loss and copper loss were used as heat source. Based on the influences of cooling system parameters, the bidirectional coupling relationship between temperature field and flow field was obtained. A cooling system analysis method was proposed. The proposed method was used to study the influence laws of cooling system structural parameters on temperature distribution. The optimal impeller parameters were obtained by comparing the cooling system calculation results under different impeller working characteristics. Finally, through the indoor no-load test and sea load test, the results show that the relative errors between test values and simulation ones of iron loss and temperature are less than 5%. The designed cooling system may operate stably under different loads.

参考文献

[1]刘鹏, 王旺球, 陈刚强, 等. 深海油气增压系统发展现状与展望[J]. 船舶标准化工程师, 2019, 52(6):87-91.
LIU Peng, WANG Wangqiu, CHEN Gangqiang, et al. Development Status and Outlook of Deep Sea Oil & Gas Compression System[J]. Ship Standardization Engineer, 2019, 52(6):87-91.
[2]徐鹏程, 曾庆军, 朱春磊, 等. 水下推进器控制系统设计与实现[J]. 舰船电子工程, 2019, 39(9):37-40.
XU Pengcheng, ZENG Qingjun, ZHU Chunlei, et al. Design and Implementation of Underwater Propeller Control System[J]. Ship Electronic Engineering, 2019, 39(9):37-40.
[3]XU Yongming, AI Mengmeng, YANG Yang. Heat Transfer Characteristic Research Based on Thermal Network Method in Submersible Motor[J]. International Transactions on Electrical Energy Systems, 2017, 28(3):1-16.
[4]IKHLAS B, AHMED M, NICOLA B. Electromagnetic/Thermal Design Procedure of an Aerospace Electric Propeller[J]. IEEE Transactions on Industry Applications, 2015, 51(6):4364-4371.
[5]MAXIMILIAN S, OSZKAR B, ERNST F, et al. Analysis of Temperature Distribution in the Stator of Large Synchronous Machines Considering Heat Conduction and Heat Convection[J]. IEEE Transactions on Magnetic, 2015, 51(3):1-4.
[6]张凤阁, 蒋晓东, 李应光, 等. 新型磁障转子无刷双馈电机热计算[J]. 中国电机工程学报, 2018, 38(9):2745-2752.
ZHANG Fengge, JIANG Xiaodong, LI Yingguang, et al. Thermal Calculation on Brushless Doubly-fed Machines with a Magnetic Barrier Rotor[J]. Proceedings of the CSEE, 2018, 38(9):2745-2752.
[7]谢颖, 郭金鹏, 单雪婷, 等. 油田抽油机用感应电动机三维瞬态温度场计算分析[J]. 电机与控制学报, 2019, 23(10):59-67.
XIE Ying, GUO Jinpeng, SHAN Xueting, et al. Three-dimensional Transient Temperature Field Calculation and Analysis of Induction Motor for Oilfield Pumping Unit[J]. Electric Machines and Control, 2019, 23(10):59-67.
[8]江从喜, 赵兰萍, 杜旭之, 等. 基于整车工况的电动汽车轮毂电机散热分析[J]. 中国机械工程, 2016, 27(13):1839-1845.
JIANG Congxi, ZHAO Lanping, DU Xuzhi, et al. Thermal Analysis on In-wheel Motor under Whole Electric Vehicle Driving Conditions[J]. China Mechanical Engineering, 2016, 27(13):1839-1845.
[9]丁树业, 仵程程. 具有径向通风结构的5兆瓦双馈风力发电机内流热特性[J]. 电机与控制学报, 2019, 23(10):68-76.
DING Shuye, WU Chengcheng. Characteristics of Fluid Flow and Heat Transfer for a 5 Megawatt Wind Generator with Radial Ventilation Structure[J]. Electric Machines and Control, 2019, 23(10):68-76.
[10]刘瑞芳, 朱健, 曹君慈. 定子铁心采用非晶与硅钢的电动汽车用永磁同步电机[J]. 北京交通大学学报, 2019, 43(5):119-125.
LIU Ruifang, ZHU Jian, CAO Junci. Temperature Field Analysis of Silicon Steel and Amorphous on Permanent Magnet Synchronous Motors Used in Electrical Vehicles[J]. Journal of Beijing Jiaotong University, 2019, 43(5):119-125.
[11]DEVI G N, TAPANI J, ANTERO A. Coupled Analytical and 3D Numerical Thermal Analysis of a TEFC Induction Motor[C]∥18th International Conference on Electrical Machines and Systems. Pattaya, Thailand, 2015:103-108.
[12]NIRMAL K B, DEBASIS S. Approximate Analysis of Transient Heat Conduction in the Rotor of an Induction Motor during Star-delta Starting[C]∥ International Conference on Information Communication and Embedded Systems. Chennai, 2015:1-6.
[13]刘蕾, 刘光复, 刘马林, 等. 车用永磁同步电机三维温度场分析[J]. 中国机械工程, 2015, 26(11):1438-1444.
LIU Lei, LIU Guangfu, LIU Malin, et al. Analysis on Three-dimensional Temperature Field of Permanent Magnet Synchron Motor in Vehicles[J]. China Mechanical Engineering, 2015, 26(11):1438-1444.
[14]刘畅, 朱孝勇, 杜怿, 等. 基于电-热双向耦合的磁场调制型磁通切换电机设计与性能分析[J]. 中国电机工程学报, 2017, 37(21):6237-6245.
LIU Chang, ZHU Xiaoyong, DU Yi, et al. Design and Performance Analysis of Magnetic Field Modulated Flux-switching Permanent Magnet Machine Based on Electrical-thermal Bi-directional Coupling Design Method[J]. Proceedings of the CSEE, 2017, 37(21):6237-6245.
[15]李昂, 邓承浩, 尹福利, 等. 基于磁-热耦合的永磁同步电机冷却系统优化[J]. 微特电机, 2019, 47(5):12-16.
LI Ang, DENG Chenghao, YIN Fuli, et al. Optimization of Cooling System of Permanent Magnet Synchronous Motor Based on Magneto-thermal Coupling Method[J]. Small & Special Electrical Machines, 2019, 47(5):12-16.
[16]刘美扬. 考虑多物理场因素的高速永磁电机铁耗模型研究[D]. 沈阳:沈阳工业大学, 2019.
LIU Meiyang. Research on Iron Loss Model of High-speed Permanent Magnet Motor Considering Multiphysics Factors[D]. Shenyang:Shenyang University of Technology, 2019.
[17]SIAVASH S, ARASH H I, KOUROSH S. Iron Loss Calculation and 3-D Thermal Analysis of Halbach Array Permanent Magnet Synchronous Motor[C]∥International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles. Aachen, 2015:1-6.
[18]SHIN K, HONG K, CHOK H. Core Loss Calculation of Permanent Magnet Machines Using Analytical Method[J]. IEEE Transactions on Applied Superconductivity, 2018, 28(3):1-5.
[19]韩雪岩, 张华伟, 徐昕, 等. 基于计算流体力学的非晶合金轴向磁通永磁电机冷却系统设计[J]. 电工技术学报, 2017, 32(20):189-197.
HAN Xueyan, ZHANG Huawei, XU Xin, et al. Design of Cooling System for Amorphous Alloy Axial Flux Permanent Magnet Motor Based on Computational Fluid Dynamics[J]. Transactions of China Electrotechnical Society, 2017, 32(20):189-197.
[20]刘冬冬, 张涛, 李连波, 等. 水下油气多相混输增压系统的发展与应用[J]. 中国石油和化工标准与质量, 2011(4):1-6.
LIU Dongdong, ZHANG Tao, LI Lianbo, et al. Development and Application of Subsea Oil-gas Multiphase Boosting System[J]. China Petroleum and Chemical Standard and Quality, 2011(4):1-6.
[21]纪兵兵, 陈金瓶. ANSYS ICEM CFD网格划分技术实例详解[M]. 北京:中国水利水电出版社, 2012.
JI Bingbing, CHEN Jinping. Detailed Explanation of Grid Generation Technology of ANSYS ICEM CFD[M]. Beijing:China Water Conservancy and Hydropower Press, 2012.
[22]孟大伟, 刘宇蕾, 张庆军, 等. 潜油电机整体三维温度场耦合计算与分析[J]. 电机与控制学报, 2010, 14(1):52-55.
MENG Dawei, LIU Yulei, ZHANG Qingjun,et al. Calculation and Analysis of 3D Temperature of the Submersible Motor Based on Coupled Field[J]. Electric Machines and Control, 2010, 14(1):52-55.
[23]陈伟. 离心泵工作范围的确定[J]. 流体机械, 2005, 33(7):60-62.
CHEN Wei. Sizing Operating Region of Centrifugal Pump[J]. Fluid Machinery, 2005, 33(7):60-62.
[24]范鹏飞, 石晓兵, 杨火海, 等. 海洋深水钻井隔水管浮力系统分析[J]. 西部探矿工程, 2017(1):43-47.
FAN Pengfei, SHI Xiaobin, YANG Huohai, et al. Buoyancy System Analysis of Marine Deepwater Drilling Riser[J]. West-China Exploration Engineering, 2017(1):43-47.
文章导航

/

〈 〉