松卷问题是热轧钢卷打捆的常见问题,严重影响钢卷的运输安全和产品质量。分析了钢卷热态打捆的详细过程,指出钢卷和捆扎钢带的温度差是产生松卷问题主要原因,并据此提出了延迟锁扣技术。通过延迟锁扣实现了捆扎带的预加热,通过控制二次收紧最小捆扎力保证了钢卷冷态时不松卷。对预加热时间进行了理论计算,并推导出延迟锁扣时间的计算公式,通过对钢卷与捆扎带相对变形量的分析,在保证捆扎带标准残余捆扎力的前提下,确定了二次收紧最小捆扎力。使用延迟锁扣技术在自动打捆机上进行了实验,结果表明该技术可以有效解决捆扎带松散问题,提高钢卷打捆质量。
The loose coil problem was a common problem in hot steel coil bundling, which seriously affected the transportation safety and product quality of steel coils. The detailed processes of hot steel coil bundling were analyzed, and the temperature difference between steel coils and steel strap was pointed out as the main reason for the problem of loose coil. Therefor a delay locking buckle technology was proposed. The pre-heating of the steel straps was achieved through the delay locking buckle. The steel coil were no longer loose in cold state by controlling the minimum bundling force for secondary tightening. The pre-heating time was calculated, and the calculation formula of the delay locking buckle time was deduced. Based on the analysis of the relative deformation of the steel coil and the steel strap, the minimum bundling force for secondary tightening was determined on the premise of ensuring the standard residual bundling force. Experiments were performed on the automatic bundling machine using the delay locking buckle technology, and the results show that the technology may effectively solve the problem of loose strap and improve the quality of steel coil bundling.
[1]于革刚,刘明利,孙瑞涛. 钢卷包装技术现状与发展趋势浅析[J].冶金设备,2005(2):48-50.
YU Gegang,LIU Mingli,SUN Ruitao.Analysis for Technology Actuality & Development Trend of the Coil Packaging[J].Metallurgical Equipment,2005(2):48-50.
[2]陈聂超,张寅.我国钢质捆带行业的现状及发展[J].轧钢,2008,25(5):39-42.
CHEN Niechao, ZHANG Yin. The Actuality and Development of the Steel Binding Industry in China[J].Steel Rolling,2008, 25(5):39-42.
[3]刘明利,于革刚,孙瑞涛.钢卷包装工艺技术研究[J].冶金设备,2005(3):35-38.
LIU Mingli,YU Gegang,SUN Ruitao.Research for Process of the Coil Packaging[J].Metallurgical Equipment,2005(3):35-38.
[4]王海军,钱承,李麒麟, 等. 热轧钢卷捆带断裂机理及其防治技术[J].中国冶金,2017,27(7):58-61.
WANG Haijun,QIAN Cheng,LI Qilin,et al. Radial Strap Fracture Mechanism and Control Technology of Hot Rolled Coil[J].China Metallurgy,2017, 27(7):58-61.
[5]牛铁. 基于45号钢热变形条件下接触热传导系数的确定[D]. 太原:太原科技大学, 2009.
NIU Tie. Determination of Contact Thermal Conductivity Based on 45# Steel under Thermal Deformation[D]. TaiYuan:Taiyuan University of Science and Technology, 2009.
[6]刘海江, 周呈呈. 钢卷包装中周向内捆带及卷眼捆带的力学性能分析[J]. 包装工程, 2013, 34(15):70-74.
LIU Haijiang,ZHOU Chengcheng. Mechanical Property Analysis of Radial Strap and Inner Circle Strap in Steel Coil Packaging[J]. Packaging Engineering,2013,34(15):70-74.
[7]刘海江, 周浩升. 钢板包装中捆带的力学性能分析[J]. 包装工程,2011,32(17):44-46.
LIU Haijiang, ZHOU Haosheng. Mechanical Property Analysis of Strap in Steel Plate Bundled Packaging[J]. Packaging Engineering, 2011,32(17):44-46.
[8]周晓欢,于革刚,刘明利, 等. 钢卷包装周向捆扎带受力分析及应用[J]. 冶金设备, 2011(5):27-29.
ZHOU Xiaohuan,YU Gegang,LIU Mingli,et al. Forced Analysis of Circle Tied Strap for Steel Coil Packing[J]. Metallurgical Equipment,2011(5):27-29.