机械基础工程

多线往复摇摆线锯切割水晶玻璃的试验研究

  • 林志树1 ,
  • 2 ,
  • 黄辉2
展开
  • 1. 厦门理工学院机械与汽车工程学院,厦门,361024
    2. 华侨大学制造工程研究院,厦门,361021
林志树,男,1973年生,副教授。研究方向为精密加工工艺与装备。发表论文10余篇。E-mail:linzs@xmut.edu.cn。

收稿日期: 2020-02-21

  网络出版日期: 2021-02-03

基金资助

国家自然科学基金(51375179,U1805251);福建省高校产学研项目(2017H6014);教育部创新团队滚动计划(IRT_17R41)

Experimental Investigation of Crystal Glass in Multi-wire Saw with Reciprocating and Rocking

  • LIN Zhishu1 ,
  • 2 ,
  • HUANG Hui2
Expand
  • 1. School of Mechanical and Automotive Engineering, Xiamen University of Technology, Xiamen,Fujian, 361024
    2. Institute of Manufacturing Engineering, Huaqiao University, Xiamen, Fujian, 361021

Received date: 2020-02-21

  Online published: 2021-02-03

摘要

利用多线往复摇摆线锯对不同形状的水晶玻璃进行切割试验,测量了不同线速度、不同进给速比条件下的切片表面粗糙度,研究了加工工艺参数对切片表面粗糙度的影响规律。试验结果表明,摇摆运动会有效地降低切片的整体表面粗糙度,线速度的提高有利于减小切片整体表面粗糙度,进给速比的改变对加工表面不同位置的粗糙度影响较大。单位长度材料去除量与切片表面粗糙度之间有较好的对应关系,减小切割过程中单位长度材料去除量可有效地降低切片的表面粗糙度。利用单位长度材料去除量可有效归整多线往复摇摆线锯加工运动中的多个调控参量。

本文引用格式

林志树1 , 2 , 黄辉2 . 多线往复摇摆线锯切割水晶玻璃的试验研究[J]. 中国机械工程, 2021 , 32(02) : 132 -140 . DOI: 10.3969/j.issn.1004-132X.2021.02.002

Abstract

Slicing experiments of crystal glass with different shapes were carried out in multi-wire saw with reciprocating and rocking. Surface roughness of the slicing crystal glass wafers were measured with various wire speeds and feed speed ratios, and the influences of processing parameters on the surface roughness of the slicing wafers were studied. The experimental results show that rocking motion effectively reduces overall surface roughness of the slicing wafers, the increase of wire speed reduces overall surface roughness, feed speed ratio has a greater impact on the roughness of slicing surfaces on different locations. The material removal per unit length of wires has a good correspondence with the surface roughness of the slicing wafers,the decrease of the material removal per unit length of wire may effectively reduce the surface roughness of the slicing wafers. Multiple control parameters in slicing movement in multi-wire saws with reciprocating and rocking may be normalized to the indicator of material removal per unit length of wires.

参考文献

[1]CLARK W I, SHIH A J, LEMASTER R L, et al. Fixed Abrasive Diamond Wire Machining—Part Ⅱ: Experiment Design and Results[J]. International Journal of Machine Tools and Manufacture, 2003, 43(5):533-542.
[2]CHUNG C. Modeling and Experimental Study of Wafer Manufacturing and Machining Processes[D]. New York: Stony Brook University, 2010.
[3]王强国. KDP晶体精密切割与磨削工艺的研究[D]. 大连: 大连理工大学, 2010.
WANG Qiangguo. Study on Precision Slicing and Grinding Processes of KDP Crystal[D]. Dalian: Dalian University of Technology, 2010.
[4]王金生. 亚固结磨料线锯切割机理与实验研究[D]. 杭州: 浙江工业大学, 2012.
WANG Jinsheng. Sawing Mechanism and Experimental Research for Semi-fixed Abrasive Wire Saw[D]. Hangzhou: Zhejiang University of Technology, 2012.
[5]BAO G, WANG W, ZHANG L. Mechanism of Material Removal in Abrasive Electrochemical Multi-wire Sawing of Multi-crystalline Silicon Ingots into Wafers[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91(1/4):383-388.
[6]郑生龙. 多线摇摆往复式线锯切割蓝宝石表面质量的试验研究[D]. 厦门: 华侨大学, 2016.
ZHENG Shenglong. Experimental Research on Sapphire Surface Quality Sliced by Multi-wire Rocking Sawing with Reciprocating Motion of Diamond Wires[D]. Xiamen: Huaqiao University, 2016.
[7]QIU T, YAO C, ZHANG W, et al. Experimental Study of the Cutting Performance of Free-abrasive Wire Sawing in a Magnetic Field[J]. The International Journal of Advanced Manufacturing Technology, 2016, 87(9/12):3113-3122.
[8]WU H. Wire Sawing Technology: a State-of-the-art Review[J]. Precision Engineering, 2016, 43: 1-9.
[9]高玉飞. 电镀金刚石线锯切割单晶硅技术及机理研究[D]. 济南: 山东大学, 2009.
GAO Yufei. Study on Electroplated Diamond Wire Saw Slicing Single Crystal Silicon Technology and Mechanism[D]. Jinan: Shandong University, 2009.
[10]赵礼刚. 金刚石线锯切割半导体陶瓷的机理与工艺研究[D]. 南京: 南京航空航天大学, 2010.
ZHAO Ligang. Research on Slicing Mechanism and Technology with Fixed Diamond Wire Saw for Semiconductor Ceramics[D]. Nangjing: Nangjing University of Aeronautics and Astronautics, 2010.

[11]HUANG H, ZHANG Y, XU X. Experimental Investigation on the Machining Characteristics of Single-crystal SiC Sawing with the Fixed Diamond Wire[J]. The International Journal of Advanced Manufacturing Technology, 2015, 81(5/8):955-965.
[12]ZHU L, KAO I. Galerkin-based Modal Analysis on the Vibration of Wire-slurry System in Wafer Slicing Using a Wiresaw[J]. Journal of Sound and Vibration, 2005, 283(3/5):589-620.
[13]BHAGAVAT S, KAO I. A Finite Element Analysis of Temperature Variation in Silicon Wafers during Wiresaw Slicing[J]. International Journal of Machine Tools and Manufacture, 2008, 48(1):95-106.
[14]张梦骏,孙玉利,左敦稳,等. 金刚石线锯切割技术研究进展[J]. 金刚石与磨料磨具工程, 2013, 33(6):44-48.
ZHANG Mengjun, SUN Yuli, ZUO Dunwen, et al. Development of the Diamond Wire Saw Cutting Technology[J]. Diamond & Abrasives Engineering, 2013, 33(6):44-48.
[15]WATANABE N, KONDO Y, IDE D, et al. Characterization of Polycrystalline Silicon Wafers for Solar Cells Sliced with Novel Fixed-abrasive Wire[J]. Progress in Photovoltaics: Research and Applications. 2010, 18(7):485-490.
[16]GUPTA A, CHEN C A, HSU H. Study on Diamond Wire Wear, Surface Quality, and Subsurface Damage during Multi-wire Slicing of C-plane Sapphire Wafer[J]. The International Journal of Advanced Manufacturing Technology, 2019,100: 1801-1814.
[17]MALKIN S, GUO C. Grinding Technology: theory and Applications of Machining with Abrasives[J]. International Journal of Machine Tools & Manufacture, 1991, 31(3):435-436.
[18]林志树,黄辉,郑生龙. 多线往复式线锯切割中单位长度材料去除量的理论分析与试验研究[J]. 机械工程学报, 2018, 54(13):208-214.
LIN Zhishu, HUANG Hui, ZHENG Shenglong.Theoretical Analysis and Experimental Study on Material Removal Per unit length of Wire in the Cutting of Multi-wire Saw with Reciprocating[J]. Journal of Mechanical Engineering, 2018, 54(13):208-214.
[19]林志树. 多线往复摇摆线锯运动对脆性材料切片质量的影响研究[D]. 厦门: 华侨大学, 2019.
LIN Zhishu. Study on Sawn Quality of Brittle Material Influenced by Motions in Multi-wire Saw with Reciprocating and Rocking[D]. Xiamen: Huaqiao University, 2019.
文章导航

/

〈 〉