机械基础工程

转向节疲劳性能与减振器阻尼关系研究

  • 董国疆 ,
  • 颜峰 ,
  • 韩杰 ,
  • 周腾
展开
  • 河北省特种运载装备重点实验室(燕山大学),秦皇岛,河北, 066004
董国疆,男,1978年生,教授、博士研究生导师。研究方向为车用高强铝板壳构件成形性能及工艺,底盘构件动力学数值仿真及疲劳损伤分析。E-mail:dgj@ysu.edu.cn。

收稿日期: 2019-07-29

  网络出版日期: 2020-12-31

基金资助

国家自然科学基金资助项目(51775481)

Study on Relationship between Fatigue Life of Steering Knuckles and Shock Absorber Damping

  • DONG Guojiang ,
  • YAN Feng ,
  • HAN Jie ,
  • ZHOU Teng
Expand
  • Hebei Key Laboratory of Special Delivery Equipment(Yanshan University),Qinhuangdao,Hebei,066004

Received date: 2019-07-29

  Online published: 2020-12-31

摘要

为探明减振器阻尼系数对转向节疲劳寿命的影响规律,以某紧凑型SUV为研究对象,通过对转向节模态分析与测试,建立其柔性体模型与疲劳仿真分析模型;以实车参数建立了整车刚柔耦合多体动力学模型,并以试验场强化路实车采集的轮心六分力和转向节监测点应变信号为基础,应用虚拟迭代法仿真获取了转向节载荷时间历程(模态位移);应用模态应力恢复法运算分析了减振器在不同阻尼系数条件下转向节的疲劳寿命,探讨了二者的相互关系。研究表明,在兼顾整车舒适性与安全性的阻尼系数范围内,随减振器阻尼系数增大,转向节疲劳寿命先增后减,即影响其疲劳寿命的主要区域损伤面积先减后增,而影响转向节疲劳寿命的次要区域损伤面积始终随着减振器阻尼系数的增大而增大。

本文引用格式

董国疆 , 颜峰 , 韩杰 , 周腾 . 转向节疲劳性能与减振器阻尼关系研究[J]. 中国机械工程, 2020 , 31(24) : 2950 -2958 . DOI: 10.3969/j.issn.1004-132X.2020.24.008

Abstract

In order to study the influences of shock absorber damping coefficients on fatigue life of steering knuckles, taking a compact SUV(sport utility vehicle) as the research object, through modal analysis and testing of steering knuckles, the flexible body models and the fatigue simulation analysis models of steering knuckle were established. The rigid-flexible coupling multi-body dynamics models of the whole vehicle were established based on the parameters of the real vehicles, and based on the six-component forces of the wheel center and the strain signals of the steering knuckle monitoring points collected by the real vehicles in the testing proving ground, using virtual iteration method simulation the load time history(modal displacement) of steering knuckles was obtained. The fatigue life of steering knuckles in different shock absorber damping coefficients was analyzed by using modal stress recovery method, and the relationship between both of them was discussed. The results show that the fatigue life of steering knuckles increases first and then decreases with the increase of damping coefficients in the range considering both of comfort and safety of the whole vehicle, that is, the damage areas of the main area affecting the fatigue life of steering knuckles decreases first and then increases. The damage areas of the secondary area which affects the fatigue life of steering knuckles always increases with the increase of damping coefficients.

参考文献

[1]张运军, 陈天赋, 杨杰, 等. 房车转向节整体模锻关键技术与模具装置研发[J]. 中国机械工程, 2018, 29(17): 2125-2130.
ZHANG Yunjun, CHEN Tianfu, YANG Jie, et al. Development on Key Technologies and Facilities of Integral Die Forging for Motorhomes Steering Knuckles[J]. China Mechanical Engineering, 2018, 29(17): 2125-2130.
[2]杨苍禄, 朱传敏, 刘素, 等. 汽车转向节疲劳寿命分析和试验研究[J]. 机电工程, 2015, 32(7): 950-953.
YANG Canglu, ZHU Chuanmin, LIU Su, et al. Fatigue Life Analysis and Experimental Validation of Automobile Steering Knuckle[J]. Journal of Mechanical & Electrical Engineering, 2015, 32(7): 950-953.
[3]冯金芝, 刘乐, 郑松林. 某轿车悬架系统的载荷仿真分析[J]. 汽车工程, 2012, 34(10): 913-917.
FENG Jinzhi, LIU Le, ZHENG Songlin. Load Simulation Analysis on a Car Suspension System[J]. Automotive Engineering, 2012, 34(10): 913-917.
[4]李飞. 轿车转向节耐久性寿命预测研究[D]. 长春: 吉林大学, 2010: 49-77.
LI Fei. Research on Durability Life Prediction of Passenger Car Steering Knuckle[D]. Changchun: Jinlin University, 2010: 49-77.
[5]方剑光, 高云凯, 徐成民. 车身疲劳载荷谱的位移反求法[J]. 同济大学学报(自然科学版), 2012, 41(6): 895-899.
FANG Jianguang, GAO Yunkai, XU Chengming. Displacement Back-calculation of Body Fatigue Loading Spectrum[J]. Journal of Tongji University(Natural Science), 2012, 41(6): 895-899.
[6]吴道俊. 车辆疲劳耐久性分析、试验与优化关键技术研究[D]. 合肥: 合肥工业大学, 2012: 74-75.
WU Daojun. Research on the Key Technologies of Analysis, Test and Optimization for Vehicle Fatigue Durability[D]. Hefei: Hefei University of Technology, 2012: 74-75.
[7]荣兵, 肖攀, 周建文. 基于实测载荷谱和仿真载荷谱的底盘疲劳分析及对比[J]. 振动与冲击, 2018, 37(12): 179-186.
RONG Bing, XIAO Pan, ZHOU Jianwen. A Fatigue Comparative Analysis of Chassis Based on Simulated Road Load Spectrum and Measured Road load Spectrum[J]. Joural of Viberation and Shock, 2018, 37(12): 179-186.
[8]黄海波, 陈星欣, 翁胜峰. 基于应力场强法的随机载荷作用下转向节疲劳寿命预估[J]. 中国机械工程, 2011, 22(13): 1629-1633.
HUANG Haibo, CHEN Xingxin, WENG Shengfeng. Knuckle Fatigue Prediction Based on Stress Field Intensity Approach under Random Excitation[J]. China Mechanical Engineering, 2011, 22(13): 1629-1633.
[9]周兵, 曾凡沂, 吴晓建, 等. 扭力梁疲劳寿命与减振器阻尼关系的研究[J]. 中南大学学报(自然科学版), 2018, 49(10): 114-121.
ZHOU Bing, ZENG Fanyi, WU Xiaojian, et al. Study of Relationship between Fatigue Life of Torsion Beam and Shock Absorber Damping[J]. Journal of Central South University (Science and Technology), 2018, 49(10): 114-121.
[10]REZA K K, FARRAHI G H, SHARIYAT M , et al. Experimental Accuracy Assessment of Various High-cycle Fatigue Criteria for a Critical Component with a Complicated Geometry and Multi-input Random Non-proportional 3D Stress Components[J]. Engineering Failure Analysis, 2018: S1350630717310099.
[11]门玉琢, 于海涛, 于海波. 重型车辆转向节臂强化路耐久性断裂试验[J]. 振动.测试与诊断, 2018, 38(5): 121-126.
MEN Yuzhuo, YU Haitao, YU Haibo. Durability Fracture Tests for Steering Knuckle Arm of Heavy Truck on Enhancement Roads[J]. Journal of Vibration, Measurement & Diagnosis, 2018, 38(5): 121-126.
[12]田国富, 张晓强. 汽车转向节强度与多轴疲劳寿命分析[J]. 机械设计与制造, 2015(4): 39-43.
TIAN Guofu, ZHANG Xiaoqiang. Strength andMulti-axial Fatigue Life Analysis of Automotive Steering Knuckle[J]. Machinery Design & Manufacture, 2015, (4): 39-43.
[13]蒋国平, 周孔亢. 旅行车独特悬架系统的运动特性[J]. 机械工程学报, 2008, 44(4): 217-221.
JIANG Guoping, ZHOU Kongkang. Kinematic Characteristic of Unique Suspension System for Wagon[J]. Chinese Journal of Mechanical Engineering, 2008, 44(4): 217-221.
[14]钱立军, 吴道俊, 祝安定, 等. 基于模态应力恢复的车架疲劳寿命计算研究[J]. 中国机械工程, 2011, 22(7):780-784.
QIAN Lijun, WU Daojun, ZHU Anding,et al. Fatigue Life Analysis for Anto Frame Based on Modal Stress Recovery[J]. China Mechanical Engineering, 2011, 22(7):780-784.
[15]董国疆, 韩杰, 颜峰, 等. 汽车零部件疲劳分析载荷谱加速编辑法研究[J]. 中国机械工程,2020,31(5):543-552.
DONG Guojiang, HAN Jie, YAN Feng, et al. Research on Load Spectrum Accelerate Editing for Fatigue Test[J]. China Mechanical Engineering,2020,31(5):543-552.
[16]刘俊, 刘亚军, 张少辉. 基于虚拟迭代技术的中型货车驾驶室载荷谱的求取[J]. 中国公路学报, 2018, 31(9):   224-232.
LIU Jun, LIU Yajun, ZHANG Shaohui. Obtaining Load Spectrum of a Truck Cab Based on Vitural Iteration Method[J]. China Journal of Highway and Transport, 2018, 31(9): 224-232.
[17]曹正林, 李骏, 郭孔辉. 基于虚拟试车场的轿车悬架耐久性强化试验仿真研究[J]. 机械工程学报, 2012, 48(10): 122-127.
CAO Zhenglin, LI Jun, GUO Konghui. Research on Passenger Car Suspension Durability Using Virtual Proving Ground[J]. Journal of Mechanical Engineering, 2012, 48(10): 122-127.
[18]周兵, 李宁, 吴晓建, 等. 减振器阻尼对扭力梁疲劳寿命的影响[J]. 中国机械工程, 2017, 28(5): 544-549.
ZHOU Bing, LI Ning, WU Xiaojian, et al. Effects of Shock Absorber Damping on Fatigue Lifes of Torision Beams[J]. China Mechanical Engineering, 2017, 28(5):544-549.
[19]周长城. 汽车平顺性与悬架系统设计[M]. 北京:机械工业出版社, 2011: 79-89.
ZHOU Changcheng. Vehicle Ride Comfort and Suspension System Design[M]. Beijing: China Machine Press, 2011: 79-89. 
文章导航

/

〈 〉