基于齐次坐标矩阵变换原理和矢量运算法则,建立了工件坐标系下球头铣刀扫掠面的数学模型,基于Z-MAP法设计了球形表面形貌的生成算法,利用该算法对球头铣刀分别采用3D环绕法和放射加工法这两种典型走刀路线加工凸球面,并对加工后的表面形貌进行了仿真,通过分析对比仿真结果,发现3D环绕法更有利于减小表面粗糙度。同时,仿真结果和试验结果具有较高的吻合度,表明该仿真方法是可靠的,可以用于实际生产中球头铣刀铣削球面表面形貌的预测。
Based on the principles of homogeneous coordinate matrix transformation and the vector algorithm, a mathematical model of the swept surfaces for the ball-end milling cutters was established under the workpiece coordinate system. Based on Z-MAP method, a spherical surface topography generation algorithm was designed. This algorithm was used for machining the convex spheres with the ball-end milling cutters by two typical moving paths of 3D surrounding method and radiation processing method respectively, and the machined surface morphologies were simulated. Through the analysis and comparison of the simulation results, it is found that the 3D surrounding method is more conducive to reduce the surface roughnesses. At the same time, the simulation results and the test results have a high degree of agreement, which indicates that the simulation method is reliable and may be used to predict the spherical milling surface topography with ball-end milling cutters in actual productions.
[1]徐安平, 曲云霞, 张大卫, 等. 考虑刀杆柔性的周铣加工表面创成模型——实验验证[J]. 机械设计, 1999(8):20-23.
XU Anping, QU Yunxia, ZHANG Dawei, et al. Model of Peripheral Milling Surface Creation Considering Tool Bar Flexibility Experimental Verification[J]. Mechanical Design, 1999(8):20-23.
[2]阎兵, 张大卫, 徐安平, 等. 球头铣刀铣削表面形貌建模与仿真[J]. 计算机辅助设计与图形学学报, 2001(2):135-140.
YAN Bing, ZHANG Dawei, XU Anping, et al. Modeling and Simulation of Surface Topography of Ball-end Milling Cutter[J]. Journal of Computer Aided Design & Computer Graphics, 2001(2):135-140.
[3]董永亨, 李淑娟, 李言,等. 球头铣刀余摆线加工表面形貌的建模与仿真研究[J]. 机械工程学报, 2018, 54(19):212-223.
DONG Yongheng, LI Shujuan, LI Yan, et al. Study on Modeling and Simulation of Surface Topography of Ball End Milling Cutter Cycloidal Machining[J]. Journal of Mechanical Engineering, 2018, 54(19):212-223.
[4]MONTGOMERY D,ALTINTAS Y. Mechanism of Cutting Force and Surface Generation in Dynamic Milling[J]. Journal of Manufacturing Science and Engineering, 1991, 113(2):160-168.
[5]JUNG T S, YANG M Y, LEE K J. A New Approach to Analysing Machined Surfaces by Ball-end Milling, Part Ⅱ[J].International Journal of Advanced Manufacturing Technology, 2005, 9/10:841-849.
[6]WANG Z, YUAN J, YIN Z, et al. Surface Topography and Roughness of High-speed Milled AlMn1Cu[J]. Chinese Journal of Mechanical Engineering, 2016, 29(6):1200-1207.
[7]LAVERNHE S, QUINSAT Y, LARTIGUE C. Model for the Prediction of 3D Surface Topography in 5-axis Milling[J]. International Journal of Advanced Manufacturing Technology, 2010, 9/12:915-924.
[8]赵军, 方文勇, 韩式国. 自由曲面数控加工表面形貌仿真[J]. 工具技术, 2007, 41(8):17-19.
ZHAO Jun, FANG Wenyong, HAN Shiguo. Simulation of Surface Topography of Free-form Surface NC machining[J]. Tool Technology, 2007, 41(8):17-19.
[9]翟肖墨. 基于球面铣削的数控编程方法[J]. 机械工程与自动化, 2007(3):146-148.
ZHAI Xiaomo. Numerical Control Programming Method Based on Spherical Milling[J]. Mechanical Engineering and Automation, 2007(3):146-148.
[10]王秋红, 葛胜兰, 陈德华. 利用FANUC宏程序铣削半球零件的3种方法[J]. 机床与液压, 2011, 16(4):41-42.
WANG Qiuhong, GE Shenglan, CHEN Dehua. Three Methods for Milling Hemispherical Parts Using FANUC Macro Program[J]. Machine Tool & Hydraulics, 2011, 16(4):41-42.
[11]于冬梅, 唐臣升, 潘国华. 高效球面数控铣削加工技术研究[J]. 航空制造技术, 2014(5):83-85.
YU Dongmei, TANG Chensheng, PAN Guohua. Research on High-efficiency Spherical CNC Milling Technology[J]. Aviation Manufacturing Technology, 2014(5):83-85.