[材料绿色成形技术]高强轻质材料绿色智能成形技术与应用

  • 华林1 ,
  • 2 ,
  • 3 ,
  • 魏鹏飞1 ,
  • 2 ,
  • 3 ,
  • 胡志力1 ,
  • 2 ,
  • 3
展开
  • 1.武汉理工大学现代汽车零部件技术湖北省重点实验室,武汉,430070
    2.武汉理工大学汽车零部件技术湖北省协同创新中心, 武汉,430070
    3.武汉理工大学材料绿色精密成形技术与装备湖北省工程中心,武汉,430070
华林,男,1962年生,教授、博士研究生导师。研究方向为快速精密成形与模具技术、现代汽车零部件技术。获国家科技进步二等奖2项、国家技术发明二等奖1项。E-mail:hualin@whut.edu.cn。

收稿日期: 2020-06-30

  网络出版日期: 2020-11-30

基金资助

国家重点研发计划资助项目(2019YFB1704502);中国汽车产业创新发展联合基金资助项目(U1564202);高等学校学科创新引智计划资助项目(B17034);教育部创新团队发展计划资助项目(IRT_17R83)

Green and Intelligent Forming Technology and Its Applications for High Strength Lightweight Materials

  • HUA Lin1 ,
  • 2 ,
  • 3 ,
  • WEI Pengfei1 ,
  • 2 ,
  • 3 ,
  • HU Zhili1 ,
  • 2 ,
  • 3
Expand
  • 1.Hubei Key Laboratory of Advanced Technology of Automobile Parts,WuhanUniversity of Technology,Wuhan,430070
    2.Hubei Collaborative Innovation Center for Automotive Components Technology,Wuhan University of Technology,Wuhan,430070
    3.Hubei Engineering Center of Material Green Precision Forming Technology and Equipment,Wuhan University of Technology,Wuhan,430070

Received date: 2020-06-30

  Online published: 2020-11-30

摘要

对高强轻质材料绿色智能成形技术的研究成果和现状进行综述,重点介绍了近年来高强轻质材料绿色智能成形技术在冷冲压工艺智能设计、热冲压组织性能智能定制、冲压智能系统与装备三方面的重要研究进展。对高强轻质材料复杂构件绿色智能冲压成形技术在高强钢冷冲压工艺设计系统中的应用,铝合金冷冲压成形后的精度控制,高强钢热冲压的性能定制以及铝合金热冲压性能调控方面进行了探讨和展望,旨在为高强轻质材料绿色智能成形技术的发展提供借鉴。

本文引用格式

华林1 , 2 , 3 , 魏鹏飞1 , 2 , 3 , 胡志力1 , 2 , 3 . [材料绿色成形技术]高强轻质材料绿色智能成形技术与应用[J]. 中国机械工程, 2020 , 31(22) : 2753 -2762,2771 . DOI: 10.3969/j.issn.1004-132X.2020.22.013

Abstract

Research achievements and current status of high strength light material green and intelligent forming processes were reviewed. Intelligent processing design of cold stamping, intelligent tailor property of hot stamping and intelligent stamping systems and equipment were mainly introduced. Green intelligent stamping forming technology of complex components made of light and high strength materials was discussed and prospected in the aspects of applications of process design systems of cold stamping with high strength steels, post-form precision control of cold stamping with aluminum alloy, tailor properties of hot stamping with high strength steels and mechanics property control of hot stamping with aluminum alloy, which aimed to give reference for intelligent forming processes of lightweight and high strength alloy.

参考文献

[1]SCHNEIDER R, GRANT R J, SCHLOSSER J M, et al. An Investigation of the Deep Drawing Beha-vior of Automotive Aluminum Alloys at Very Low Temperatures[J]. Metallurgical and Materials Transactions A, 2019, 51:1123-1133.
[2]PANDYA K S, ROTH C C, MOHR D. Strain Rate and Temperature Dependent Fracture of Aluminum Alloy 7075:Experiments and Neural Network Mo-deling[J]. International Journal of Plasticity, 2020, 51:102788-102839.
[3]NAKAGAWA Y, MORI K I, SUZUKI Y, et al. Tailored Tempering without Die Heating in Hot Stamping of Ultra-high Strength Steel Parts[J]. Materials & Design, 2020, 192:108704-108715.
[4]AVUOLU O, AVUOLU O, YLMAZOLU A G, et al. Microstructural Features and Mechanical Properties of 22MnB5 Hot Stamping Steel in Different Heat Treatment Conditions[J]. Journal of Materials Research and Technology, 2020, 9(5):10901-10908.
[5]LI Huanhuan, HU Zhili, HUA Lin, et al. Optimization of Hot Forming-quenching Integrated Process Parameters for Complex Aluminum Alloy Automotive Components[J]. Rare Metal Materials and Engineering, 2019, 48(4):1029-1035.
[6]ZHANG Wenpei, HU Zhili, LI Huanhuan, et al. Experimental and Numerical Investigation on Springback of Automotive Aluminum Alloy Sheet[J]. Rare Metal Materials and Engineering, 2019, 48(7):2130-2137.
[7]LI Huanhuan, HU Zhili, HUA Lin, et al. Influence of Thermal Deformation Parameters on Mechanical Properties and Microstructure Evolution of AA7075 Aluminum Alloy during Hot Stamping-Quenching Process[J]. JOM, 2019, 71(12):4778-4788.
[8]LEONG W D, LAM H L, NG W P Q, et al. Lean and Green Manufacturing—a Review on Its Applications and Impacts[J]. Process Integration and Optimization for Sustainability, 2019, 3:5-23.
[9]曹华军,李洪丞,曾丹,等.绿色制造研究现状及未来发展策略[J].中国机械工程, 2020, 31(2):135-144.
CAO Huajun, LI Hongcheng, ZENG Dan, et al. The State-of-art and Future Development Strategies of Green Manufacturing[J]. China Mechanical Engineering, 2020, 31(2):135-144.
[10]XU Zhichao, LIU Yanxiong, HUA Lin, et al. Energy Analysis and Optimization of Main Hydraulic System in 10 000 kN Fine Blanking Press with Simulation and Experimental Methods[J]. Energy Conversion and Management, 2019, 181:143-158.
[11]TAO Wenjin, LAI Zehao, LEU M C, et al. A Self-aware and Active-guiding Training & Assistant System for Worker-centered Intelligent Manufacturing[J]. Manufacturing Letters, 2019, 21:45-49.
[12]WANG Lihui. From Intelligence Science to Intelligent Manufacturing[J]. Engineering, 2019, 5(4):595-812.
[13]KUMAR S P L. State of the Art-intense Review on Artificial Intelligence Systems Application in Process Planning and Manufacturing[J]. Engineering Applications of Artificial Intelligence, 2017, 65:294-329.
[14]JUNG I D, SHIN D S, KIM D, et al. Artificial Intelligence for the Prediction of Tensile Properties by Using Microstructural Parameters in High Strength Steels[J]. Materialia, 2020, 11:100699-100739.
[15]WANG A, ELFAKIR O, LIU J, et al. Multi-objective Finite Element Simulations of a Sheet Metal-forming Process via a Cloud-based Platform[J]. International Journal of Advanced Manufacturing Technology, 2018, 100:2753-2765.
[16]LIAO S H. Expert System Methodologies and Applications: a Decade Review from 1995 to 2004[J]. Expert Systems with Application, 2005, 28(1):93-103.
[17]JIN Z, LUO S, FANG X D. KBS-aided Design of Tube Bending Processes[J]. Engineering Applications of Artificial Intelligence, 2001, 14(5):599-606.
[18]NARANJE V, KUMAR S. A Knowledge-based Systemfor Strip-layout Design for Progressive Deep Drawing Dies[J]. International Journal of Computer Applications in Technology, 2013, 48(3):222-234.
[19]周杰,阳德森,李路,等.基于可控拉深筋的高强度板拉深性能优化及预测[J].同济大学学报(自然科学版), 2010, 38(12):1796-1801.
ZHOU Jie, YANG Desen, LI Lu, et al. Formability Improvement and Prediction of High Strength Steel Based on Controllable Drawbead[J]. Journal of Tongji University(Natural Science), 2010, 38(12):1796-1801.
[20]MA Wenyu, YANG Jianwei, ZHANG jun, et al. Analysis and Multi-objective Optimization on the Stamping of High Strength Steel[C]∥ Atlantis Highlights in Intelligent Systems. Beijing, 2018:218-220.
[21]谢晖, 袁志鹏, 王诗恩,等. 基于KBE的B柱全流程冲压工艺设计及系统开发[J]. 热加工工艺, 2016,45(13):133-138.
XIE Hui, YUAN Zhipeng, WANG Shien, et al. Design and System Development of Whole Flow Path Stamping Process for B-pillar Based on KBE[J]. Hot Working Technology, 2016,45(13):133-138.
[22]左哲. 典型车身超高强钢结构件冷冲压工艺智能设计系统开发[D]. 武汉:武汉理工大学, 2020.
ZUO Zhe. Development of Intelligent Design System for Cold Stamping Process of Typical High-strength Steel Structural Parts[D]. Wuhan:Wuhan University of Technology, 2020.
[23]REN Shengle, LAI Yinan, WU Guangfei, et al. Intelligent Prediction of Process Parameters for Cold Bending[J]. Advanced Materials Research, 2011, 154/155:74-78.
[24]ZHAO Jun, WANG Fengquin. Parameter Identification by Neural Network for Intelligent Deep Drawing of Axisymmetric Workpieces[J]. Journal of Materials Processing Technology, 2005, 166(3):387-391.
[25]段嘉鑫. 3A21铝合金微波天线反射面冲压成形回弹分析及控制[D]. 武汉:武汉理工大学, 2020.
DUAN Jiaxin. Springback Analysis and Control of A3A21 Aluminum Alloy Microwave Antenna Reflective Surface Stamping[D]. Wuhan:Wuhan University of Technology, 2020.
[26]LI Huanhuan, HU Zhili, HU Wenzhi, et al. Forming Quality Control of an AA5182-O Aluminum Alloy Engine Hood Inner Panel[J]. JOM, 2019, 71(5):1687-1695.
[27]WANG Ailing, LIU Jun, GAO Haoxiang, et al. Hot Stamping of AA6082 Tailor Welded Blanks:Experiments and Knowledge Based Cloud FE (KBC-FE) Simulation[J]. Journal of Materials Processing Technology, 2017, 250:228-238.
[28]PETRI H, DUY P, YUQIUGE H. Cloud Manufacturing-scheduling as a Service for Sheet Metal Manufacturing[J]. Computers & Operations Research, 2019, 110:208-219.
[29]BULLING A, BLANKE U, SCHIELE B. A Tutorial on Human Activity Recognition Using Body-worn Inertial Sensors[J]. ACM Computing Surveys, 2014, 46(3):1-33.
[30]CHENG Guojian, LIU Liting, QIANG Xinjian, et al. Industry 4.0 Development and Application of Intelligent Manufacturing[C]∥ IEEE International Conference on Information System & Artificial Intelligence. Hong Kong, 2016:407-410.
[31]WANG L, AN X Y, ZHU B, et al. Research on Intelligent Process and Production Method of Hot Stamping[C]∥ Advanced High Strength Steel and Press Hardening. Xian, 2017:486-491.
[32]HUANG Wenjiang, MARTIN P, ZHUANG Houlong. Machine-learning Phase Prediction of High-entropy Alloys[J]. Acta Materialia, 2019, 169:225-236.
[33]MEREDIG B, WOLVERTON C. A Hybrid Computational-experimental Approach for Automated Crystal Structure Solution[J]. Nature Materials, 2013, 12(2):123-127.
[34]CHOKSHI P, DASHWOOD R J, HUGHES D J. Artificial Neural Network(ANN) Based Microstructural Prediction Model for 22MnB5 Boron Steel during Tailored Hotstamping[J]. Computers & Structures, 2017, 190:162-172.
[35]ZHOU Jing, WANG Baoyu, HUANG Mingdong, et al. Effect of Hot Stamping Parameters on the Mechanical Properties and Microstructure of Cold-rolled 22MnB5 Steel Strips[J]. International Journal of Minerals, Metallurgy and Materials, 2014(6):544-555.
[36]MU Yanhong, WANG Baoyu, ZHOU Jing, et al. Influences of Hot Stamping Parameters on Mechanical Properties and Microstructure of 30MnB5 and 22MnB5 Quenched in Flat Die[J]. Journal of Central South University, 2018, 25(4):736-746.
[37]刘鹏,龙曲波,尤宝卿,等.超高强度钢板热成形软区关键技术的研发[J].锻造与冲压, 2019(16):29-33.
LIU Peng, LONG Qubo, YOU Baoqing, et al. Research and Development of Key Technology of Ultra High Strength Steel Sheet with Hot Forming Soft Zone[J]. Forging & Metal Forming, 2019(16):29-33.
[38]SHEN Yuhan, SONG Yanli, HUA Lin, et al. Influence of Plastic Deformation on Martensitic Transformation during Hot Stamping of Complex Structure Auto Parts[J]. Journal of Materials Engineering & Performance, 2017, 26(4):1830-1838.
[39]王礼良,蔡昭恒,孙雨豪,等. 一种以数据为导向制造轻量化薄壁钣金零件的方法: CN 110465573A[P]. 2019-11-19.
WANG Liliang, CAI Zhaoheng, SUN Yuhao, et al. A Data-oriented Method for Manufacturing Lightweight Sheet Metal Parts:CN 110465573A[P]. 2019-11-19.
[40]NAKAGAWA Y , MORI K I , SUZUKIY , et al. Tailored Tempering without Die Heating in Hot Stamping of Ultra-high Strength Steel Parts[J]. Materials & Design, 2020, 192:108704-108715.
[41]HUA Lin, MENG Fanzhi, SONG Yanli, et al. A Constitutive Model of 6111-T4 Aluminum Alloy Sheet Based on the Warm Tensile Test[J]. Journal of Materials Engineering and Performance, 2014, 23(3):1107-1113.
[42]LAN Jian, SHEN Xuejun, LIU Juan, et al. Strengthening Mechanisms of 2A14 Aluminum Alloy with Cold Deformation Prior to Artificial Aging[J]. Materials Science and Engineering:A, 2019, 745:517-535.
[43]ZHOU Pu, SONG Yanli, HUA Lin, et al. Using Novel Strain Aging Kinetics Models to Determine the Effect of Solution Temperature on Critical Strain of Al-Zn-Mg-Cu Alloy[J]. Journal of Alloys and Compounds, 2020, 835:155647-155664.
[44]李欢欢. 7075铝合金车身构件快速热冲压形性演变规律及控制研究[D]. 武汉:武汉理工大学, 2020.
LI Huanhuan. Study on the Formability and Mechanical Properties Evolution and Control for PAHF of 7075 Aluminum Alloy Parts[D]. Wuhan:Wuhan University of Technology, 2020.
[45]ZHANG Wenpei, LI Huanhuan, HU Zhili, et al. Investigation on the Deformation Behavior and Post-formed Microstructure/Properties of AA7075-T6 Alloy under Pre-hardened Hot Forming Process[J]. Materials Science and Engineering A,2020, 792:139749-139760.
[46]LUAN X , ZHANG Q L , FAKIR O E , et al. Uniform:a Pilot Production Line for Hot/Warm Sheet Metal Forming Integrated in a Cloud Based SMARTFORMING Platform[C]∥ International Conference on Advanced High Strength Steel & Press Hardening. Xian, 2016, 492-497.
[47]WANG Ailing, ZHENG Yang, LIU Jun, et al. Knowledge Based Cloud FE Simulation a Multi-objective FEA System for Advanced FE Simulation of Hot Stamping Process[C]∥ International Conference & Workshop on Numerical Simulation of 3d Sheet Metal Forming Processes. Bristol, 2016, 426-430.
[48]WANG Liang, ZHU Bin, WANG Qiang, et al.Modeling of Hot Stamping Process Procedure Based on Finite State Machine(FSM)[J]. The International Journal of Advanced Manufacturing Technology, 2016, 89, 857-868.
[49]王梁,苏志同,安兴运,等.热冲压生产中的长周期智能控制[J].锻压技术,2020,45(7):128-132.
WANG Liang, SU Zhitong, AN Xingyun, et al. Long-period Intelligent Control in Hot Stamping Production[J]. Forging & Stamping Technology, 2020,45(7):128-132.
[50]宋燕利,华林,戴定国.一种基于急动度的伺服冲压速度控制方法:CN 106739128A [P]. 2017-05-31.
SONG Yanli, HUA Lin, DAI Dingguo. A Servo Speed Control Method Based on Jerk:CN 106739128A [P]. 2017-05-31.
[51]戴定国. 高强铝合金车身构件伺服热冲压工艺与性能调控[D]. 武汉:武汉理工大学, 2018.
DAI Dingguo. Servo Hot Stamping Process and Property Regulation of High Strength Aluminum Alloy Automotive Parts[D]. Wuhan:Wuhan University of Technology, 2018.
文章导航

/

〈 〉