机械基础工程

超声振动透镜辅助激光打孔实验研究

  • 沈诚 ,
  • 邹平 ,
  • 康迪 ,
  • 王文杰
展开
  • 东北大学机械工程与自动化学院,沈阳,110819
沈诚,男,1994年生,硕士研究生。研究方向为超声振动辅助加工、激光加工。

收稿日期: 2019-12-21

  网络出版日期: 2020-11-20

基金资助

国家自然科学基金资助项目(51875097)

Experimental Study on Ultrasonic Vibration Lens Assisted Laser Drilling

  • SHEN Cheng ,
  • ZOU Ping ,
  • KANG Di ,
  • WANG Wenjie
Expand
  • School of Mechanical Engineering,Northeastern University, Shenyang, 110819

Received date: 2019-12-21

  Online published: 2020-11-20

摘要

为研究超声振动透镜辅助对激光打孔加工质量和效率的影响,采用YLR-1000连续激光器和所设计的超声振动透镜辅助装置,以304不锈钢薄片为研究对象,分别在不同离焦量、激光功率、打孔时间、超声振幅情况下进行有无超声振动辅助激光打孔对比实验。实验采用VHX-1000E超景深显微系统对工件进行检测,并以孔径、热影响区半径、孔锥度、孔深和堆砌高度为主要指标分析实验结果。结果表明:超声振动透镜辅助可从总体上提高激光打孔的加工质量和效率。

本文引用格式

沈诚 , 邹平 , 康迪 , 王文杰 . 超声振动透镜辅助激光打孔实验研究[J]. 中国机械工程, 2020 , 31(21) : 2542 -2546 . DOI: 10.3969/j.issn.1004-132X.2020.21.004

Abstract

In order to study the effects of ultrasonic vibration lens assisted on the quality and efficiency of laser drilling, the YLR-1000 continuous laser and the self-designed ultrasonic vibration lens auxiliary device were used to study 304 stainless steel sheets, respectively, with different defocusing amounts, laser power, drilling time, and ultrasonic amplitude were compared with or without ultrasonic vibration assisted laser drilling. In the experiments, the VHX-1000E super depth of field microscopy system was used to detect the workpiece, and the experimental results were analyzed with the aperture, heat affected zone radius, hole taper, hole depth and splash height as the main indicators. The results show that the ultrasonic vibration lens assisted improves the processing quality and efficiency of laser drilling in general.

参考文献

[1]荣烈润. 激光微细孔加工技术及其应用[J]. 机电一体化, 2003, 9(6): 8-12.
RONG Lierun. Laser Micro Hole Processing Technology and Its Application[J]. Mechatronics, 2003, 9(6): 8-12.
[2]谭险峰, 杨俊华, 耿艳青. 激光打孔中离焦量与小孔尺寸关系的实验研究[J]. 应用激光, 2011(3): 60-63.
TAN Xianfeng, YANG Junhua, GENG Yanqing.Experimental Study on the Relationship between the Amount of Defocus and the Size of Small Holes in Laser Drilling[J]. Applied Laser, 2011(3): 60-63.
[3]SCHNEIDER M, BERTHE L, REMY F, et al. Gas Investigation for Laser Drilling[J]. Journal of Laser Application, 2007, 19(3): 165-169.
[4]宋林森, 史国权, 李占国. 利用ANSYS 进行激光打孔温度场仿真[J]. 兵工学报, 2006, 27(5): 779-782.
SONG Linsen, SHI Guoquan, LI Zhanguo.Laser Drilling Temperature Field Simulation Using ANSYS[J]. Acta Armamentarii, 2006, 27(5): 779-782.
[5]褚庆臣, 虞钢, 卢国权, 等. 激光打孔工艺参数对孔型影响的二维数值模拟研究[J]. 中国激光, 2011(6): 89-94.
CHU Qingchen, YU Gang, LU Guoquan, et al.Two-dimensional Numerical Simulation of the Influence of Laser Drilling Process Parameters on the Hole Shape[J]. Chinese Journal of Lasers, 2011(6): 89-94.
[6]ALAVI S H, HARIMKAR S P. Effect of Vibration Frequency and Displacement on Melt Expulsion Characteristics and Geometric Parameters for Ultrasonic Vibration-assisted Laser Drilling of Steel[J]. Ultrasonics, 2018,94: 1-9.
[7]XIA K B, REN N F, WANG H X, et al. Analysis for Effects of Ultrasonic Power on Ultrasonic Vibration-assisted Single-pulse Laser Drilling[J]. Optics and Lasers in Engineering, 2018 (110): 279-287.
[8]WANG H X, ZHU S K, XU G X, et al. Influence of Ultrasonic Vibration on Percussion Drilling Performance for Millisecond Pulsed Nd:YAG Laser[J]. Optics and Lasers on Technology, 2018(104): 133-139.
[9]孙堃, 王克勤, 韩晓春, 等. 超声振动透镜聚焦法激光打孔[J]. 吉林工业大学学报, 1994, 24(2): 34-38.
SUN Kun, WANG Keqin, HAN Xiaochun, et al.Ultrasonic Vibration Lens Focusing Method Laser Drilling[J]. Journal of Jilin University, 1994, 24(2): 34-38.
[10]ARECCHI F T, SCHULZ E O. 激光的技术应用(第六分册)[M]. 北京: 科学出版社, 1983.
ARECCHI F T, SCHULZ E O. Laser Technology Application (Volume Ⅵ)[M]. Beijing: Science Press, 1983.
文章导航

/

〈 〉