针对航空航天钛合金加工时硬质合金刀具磨损过快的难题,制备了主元素一致、微量合金碳化物TaC(NbC)含量不同的两种WC-Co基硬质合金材料。采用高温维氏硬度计检测两种材料的高温硬度和高温断裂韧性,并制备相同几何参数的立铣刀对钛合金TC4进行铣削加工试验。试验结果表明:在硬质合金中添加微量合金碳化物TaC(NbC),可以同时提高材料的高温硬度和高温断裂韧性,在相同的切削条件下,添加微量合金碳化物TaC(NbC)的硬质合金立铣刀比未添加微量合金碳化物的立铣刀耐磨性更好,刃口断裂裂纹更少,刀具使用寿命更长,更适合航空航天钛合金材料的高速铣削加工。
Aiming at the problems of fast wear of cemented carbide tools in the machining processes of aerospace titanium alloys, two WC-Co cemented carbide materials with the same main elements and different contents of TaC(NbC) were prepared herein. High temperature hardness and high temperature toughness of two carbide materials were measured by high temperature Vickers hardness tester. Then, the milling experiments of titanium alloy TC4 were performed with end-mills which were made of these two materials. The experimental results show that the high temperature hardness and high temperature toughness may be improved by adding TaC(NbC) to the cemented carbide materials. Under the same cutting conditions, the wear resistance of cemented carbide tools with TaC(NbC) is better than that without TaC(NbC). The tools with TaC(NbC) have less fracture cracks, longer tool life, and are more suitable for high speed milling of aerospace titanium alloy TC4.
[1] 谭靓,张定华,姚倡锋,等. 刀具几何参数对钛合金铣削力和表面完整性的影响[J]. 中国机械工程, 2015,26(6):737-742. TAN Liang, ZHANG Dinghua, YAO Changfeng, et al. Influence of Tool Geometrical Parameters on Milling Force and Surface Integrity in Milling Titanium Alloy[J]. China Mechanical Engineering,2015,26(6):737-742.
[2] ARISOY Y M, ÖZEL T. Prediction of Machining Induced Microstructure in Ti-6Al-4V Alloy Using 3-D FE-based Simulations:Effects of Tool Micro-geometry, Coating and Cutting Conditions[J]. Journal of Materials Processing Technology, 2015, 220:1-26.
[3] DORLIN T, FROMENTIN G, COSTES J. Analysis and Modelling of the Contact Radius Effect on the Cutting Forces in Cylindrical and Face Turning of Ti6Al4V Titanium Alloy[J]. Procedia CIRP, 2015, 31:185-190.
[4] 肖虎,李亮. TC4钛合金在低温CO2冷却下的切削性能[J]. 中国机械工程, 2017, 28(8):883-887. XIAO Hu, LI Liang. High Speed Cutting of TC4 Titanium Alloy under Cryogenic CO2 Cooling Conditions[J]. China Mechanical Engineering, 2017, 28(8):883-887.
[5] SUI S C, FENG P F. The Influences of Tool Wear on Ti6Al4V Cutting Temperature and Burn Defect[J]. International Journal of Advanced Manufacturing Technology, 2016, 85(9/12):2831-2838.
[6] 易湘斌,焦爱胜,常文春,等. 不同冷却润滑条件下TB6钛合金高速铣削切削力实验研究[J]. 润滑与密封, 2017, 42(9):92-97. YI Xiangbin, JIAO Aisheng, CHANG Wenchun, et al. Research on Cutting Force of High Speed Milling TB6 in Different Cooling Lubricating Conditions[J]. Lubrication Engineering, 2017, 42(9):92-97.
[7] 汪耀龙,胡亚辉,孙建波,等. 基于正交试验的高速切削钛合金切削力研究[J]. 工具技术, 2016, 50(2):17-19. WANG Yaolong, HU Yahui, SUN Jianbo, et al. Research on Cutting Force of High Speed Cutting Titanium Alloy Based on Orthogonal Experiment[J]. Tool Engineering, 2016, 50(2):17-19.
[8] CHENG Y, LIU L, WU M, et al. High-temperature Mechanical Properties of a Cemented Carbide Cutter during Extra-heavy Cutting Process[J]. Journal of Harbin Engineering University, 2015, 36(4):560-566.
[9] 林亮亮. WC_xTaC-Co硬质合金的结构性能及高温硬度的演变[J]. 金刚石与磨料磨具工程, 2018, 38(4):50-55. LIN Liangliang. Evolution of Microstructure and High Temperature Hardness in WCxTaC-Co Cemented Carbides[J]. Diamond & Abrasives Engineering, 2018, 38(4):50-55.
[10] 王文广,张贺佳,王全兆,等. 碳化物抑制剂对WC-2.5TiC-10Co超细晶硬质合金微观组织及力学性能的影响[J]. 材料研究学报, 2015, 29(12):881-888. WANG Wenguang, ZHANG Hejia, WANG Quanzhao, et al.Effects of Carbide Inhibitor on Microstructures and Mechanical Properties of Ultrafine Grained Carbide Cement WC-2.5TiC-10Co[J]. Chinese Journal of Materials Research, 2015, 29(12):881-888.
[11] 弓满锋,李明圣,连海山. WC-Co-Ti(C,N)-Ni-Mo系硬质合金微观结构及其力学性能的影响[J]. 岭南师范学院学报, 2018, 39(6):57-65. GONG Manfeng, LI Mingsheng, LIAN Haishan, et al. Microstructure and Mechanical Properties of WC-Co-Ti(C,N)-Ni-Mo Cemented Carbides[J]. Journal of Lingnan Normal University, 2018, 39(6):57-65.
[12] 杨小璠,李友生,李凌祥,等. 硬质合金高温性能对碳纤维复合材料切削加工的影响研究[J]. 金刚石与磨料磨具工程, 2017, 37(5):45-49. YANG Xiaofan, LI Yousheng, LI Lingxiang et al. Effect of High Temperature Performance of Carbide on Carbon Fiber Reinforced Polymer(CFRP) Cutting[J]. Diamond & Abrasives Engineering, 2017, 37(5):45-49.