针对电连接器内部温度难以准确测量的问题,以Y2型宇航分离脱落电连接器为研究对象,完成了电连接器内部温度测试方法的仿真研究、试验设计及相关影响因素分析。利用SolidWorks软件建立电连接器的三维模型,基于ANSYS对电连接器模型进行热电耦合仿真分析,得到了电连接器在不同环境温度下的内部温升及温度分布规律。设计电连接器内部温度测试系统,完成电连接器内部温度测试以及与仿真结果的对比验证。基于此仿真方法,研究芯数、工作电流及接触电阻对电连接器温度变化的影响,发现电连接器内部最高温度均随这三个影响因素的增大而增大。
Simulation, experimental design and influential factors analysis were carried out, in view of the difficulties to measure the internal temperatures of the electrical connectors and the inaccurate measurement results, taking Y2 type electrical connectors as the research objects. Three-dimensional model was conducted by SolidWorks, thermal-electric coupling finite elements simulation was implemented by ANSYS, and then temperature rise and temperature field distribution were analyzed under different environmental temperatures. A set of internal temperature test systems was designed, actual internal temperatures of electrical connectors were measured and the experimental data show a good agreement with simulation results. The influences of number of cores, current and contact resistance on internal temperatures of electrical connectors were simulated, and the results show that the maximum temperatures increase with the increases of the three factors.
[1] 骆燕燕,马旋,李小宁,等.航空电连接器热循环试验与寿命预测[J].中国机械工程,2018,29(3):333-339. LUO Yanyan, MA Xuan, LI Xiaoning, et al. Thermal Cycling Test and Life Predication of Aviation Electrical Connectors[J]. China Mechanical Engineering, 2018, 29(3):333-339.
[2] ZHU Z Y, LEE H P, CHEOK B T. Finite Element Analysis of Thermal Shock Tests of RF Connectors[J]. Journal of Materials Processing Tech.,2005,168(2):291-295.
[3] WANG Xin, XU Liangjun. Finite Element Model Analysis of Thermal Failure in Connector[J].Journal of Zhejiang University Science A, 2007, 8(3):397-402.
[4] 杜永英,孙志礼,王宇宁,等. 基于热分析的电连接器的温度应力研究[J]. 机械设计与制造,2013(10):42-44. DU Yongying, SUN Zhili, WANG Yuning, et al. Study on Temperature Stress for Electrical Connector Based on the Thermal Analysis[J]. Machinery Design & Manufacture, 2013(10):42-44.
[5] 李志博,朱玛,张高峰. ANSYS在电连接器温升分析中的应用[J]. 计算机应用与软件,2011,28(5):189-192 LI Zhibo, ZHU Ma, ZHANG Gaofeng. Applying ANSYS in Analysis Temperature Rise of Electric Connector[J]. Computer Applications and Software, 2011, 28(5):189-192.
[6] 许成彬,潘骏,陈文华,等.高温电连接器有限元分析与接触件插拔试验[J].工程设计学报,2015,22(3):250-255. XU Chengbin, PAN Jun, CHEN Wenhua, et al. Finite Element Thermal Analysis and Plugging Test of the High Temperature Electrical Connector[J]. Chinese Journal of Engineering Design, 2015,22(3):250-255.
[7] 靳哲峰. 环境综合应力作用下航天点链接可靠性分析与建模[D]. 杭州:浙江大学,2003:5-21. JIN Zhefeng. Failure Analysis and Reliability Modeling for Electrical Connectors under the Action of Combined Environment Stress[D]. Hangzhou:Zhejiang University, 2003:5-21.
[8] 骆燕燕,王振,李晓宁,等. 电连接器热循环加速试验与失效分析研究[J].兵工学报,2014,35(11):1908-1913. LUO Yanyan, WANG Zhen, LI Xiaoning, et al. Accelerated Thermal Cycling Test and Failure Analysis of Electrical Connectors[J]. Acta Armamentarii, 2014,35(11):1908-1913.
[9] 宋万里,张训义,孙志礼,等.不同结构尺寸的电连接器的温度与振动分析[J].机械设计与制造,2017(1):13-15. SONG Wangli, ZHANG Xunyi, SUN Zhili, et al. Temperature and Vibration Analysis of Electric Connector on Different Structural Dimension[J]. Machinery Design & Manufacture, 2017(1):13-15.
[10] 秦宁,章志兵,许恒建,等. 基于SolidWorks的钣金成形快速分析系统开发[J]. 中国机械工程,2011,22(9):1026-1030. QIN Ning, ZHANG Zhibing, XU Hengjian, et al. Development of Fast Analysis Software for Sheet Metal Forming Based on SolidWorks[J]. China Mechanical Engineering,2011,22(9):1026-1030.