可持续制造

基于实验设计与数据分析的金属热挤压成形比能耗优化

  • 李洪丞 ,
  • 马国喜 ,
  • 罗蓉 ,
  • 罗志勇
展开
  • 重庆邮电大学先进制造工程学院, 重庆, 400065
李洪丞,男,1986年生,副教授。研究方向为数据驱动的工厂绿色增效、绿色制造工艺与装备、智能制造系统。发表论文20余篇。E-mail:lihc@cqupt.edu.cn。

收稿日期: 2018-05-24

  网络出版日期: 2020-07-20

基金资助

国家自然科学基金资助项目(U1501248,51805066);重庆市自然科学基金资助项目(cstc2018jcyjAX0579)

Optimization of Forming Specific Energy of Metal Hot Extrusion Based on DOE and Data Analysis

  • LI Hongcheng ,
  • MA Guoxi ,
  • LUO Rong ,
  • LUO Zhiyong
Expand
  • College of Advanced Manufacturing Engineering, Chongqing University of Posts and Telecommunications, Chongqing, 400065

Received date: 2018-05-24

  Online published: 2020-07-20

摘要

为降低金属挤压成形阶段能耗,以挤压成形比能耗为目标,建立热平衡约束条件等价方程,以铝棒起始温度、铝棒长度、挤压速度、挤压筒温度、模角等为控制变量,以热导率、材料强度系数为扰动变量,集成利用实验设计(DOE)与数据分析等方法构建热平衡约束的挤压成形比能耗鲁棒优化模型。结果表明,在热平衡约束以及多参数控制环境下,通过鲁棒优化可降低挤压成形比能耗,而且可以保证产品质量的稳定性。

本文引用格式

李洪丞 , 马国喜 , 罗蓉 , 罗志勇 . 基于实验设计与数据分析的金属热挤压成形比能耗优化[J]. 中国机械工程, 2019 , 30(15) : 1849 -1855 . DOI: 10.3969/j.issn.1004-132X.2019.15.011

Abstract

In order to reduce the energy consumption of metal extrusion forming stages, a robust optimization model of forming specific energy consumption with the control variables such as initial temperature, length of the aluminum bar, extrusion speed, extrusion temperature, and die angle was proposed by using thermal conductivity and material strength coefficient as disturbance varibales based on DOE and data analysis model. Furthermore, thermal equilibrium constraints equivalent equation was established in the robust optimization model. Results show that even though the extrusion forming is constrained by thermal equilibrium and controlled by multi-parameters, the proposed robust optimization model also may reduce the energy consumption and simultaneously guarantee the product quality.

参考文献

[1] WANG Q, LIU F, LI C. An Integrated Method for Assessing the Energy Efficiency of Machining Workshop[J]. Journal of Cleaner Production, 2013, 52:122-133.
[2] MOUZON G, YILDIRIM M B, TWOMER J. Operational Methods for Minimization of Energy Consumption of Manufacturing Equipment[J]. International Journal of Production Research, 2007, 45(18/19):4247-4271.
[3] GUTOWSKI T G, BRANHAM M S, DAHMUS J B, et al. Thermodynamic Analysis of Resources Used in Manufacturing Processes[J]. Environmental Science & Technology, 2009, 43(5):1584.
[4] 刘静安, 何梅琼, 左其福,等. 推广国产优质模具钢促进铝挤压工业与技术发展-SRM-1高强韧高温耐磨特种合金钢的特性及性价比分析[J]. 铝加工, 2016(4):57-62. LIU Jing'an, HE Meiqiong, ZUO Qifu, et al. Propotion of Domestic High-quality Steel, Promotion of Development of Aluminum Extrusion Industry and Technology[J].Aluminium Fabrication, 2016, (4):57-62.
[5] 项胜前, 罗铭强, 陈文泗,等. 铝合金一模多出(孔)挤压的特点及关键技术[J]. 铝加工, 2015(5):9-14. XIANG Shengqian, LOU Mingqiang, CHEN Wensi, et al. Characteristics and Key Technical Analysis for Porous Mold Extrusion of Aluminum Alloy[J]. Aluminium Fabrication, 2015, (5):9-14.
[6] 王祝堂. 中国铝挤压工业现状[J]. 有色金属加工, 2016, 45(1):1-3. WANG Zhutang. Present Situation of Aluminum Extrusion Industry in China[J]. Nonferrous Metals Processing, 2016, 45(1):1-3
[7] 丁宁,高峰,王志宏,等. 铝挤压材生产的能耗和温室效应分析[J].轻金属,2011(增刊1):320-324. DING Ning, GAO Feng, WANG Zhihong,et al. Analysis of the Energy Consumption and Greenhouse Gas Emissions in Aluminum Extrusion Production[J]. Light Metals, 2011(S1):320-324.
[8] INGARAO G, PRIARONE P C, GAGLIARDI F, et al. Subtractive Versus Mass Conserving Metal Shaping Technologies:an Environmental Impact Comparison[J]. Journal of Cleaner Production, 2015, 87:862-873.
[9] INGARAO G, PRIARONE P C, LORENZO D R, et al. A Methodology for Evaluating the Influence of Batch Size and Part Geometry on the Environmental Performance of Machining and Forming Process[J]. Journal of Cleaner Production, 2016, 135:1611-1622.
[10] BUIS J J, SUTHERLAND J W, ZHAO F. Unit Process Life Cycle Inventory Models of Hot Forming Processes[C]//Proceedings of the ASME 2013 International Manufacturing Science and Engineering Conference. Madison, Wisconsin, 2013:V002T04A011.
[11] JEONG M S, LEE S Y, LEE I K, et al. Green Alternative Aluminum Extrusion Process through Process Convergence[J]. International Journal of Precision Engineering and Manufacturing, 2014, 15(6):1173-1177.
[12] 王安哲,陈忠家,张哲,等.铜管挤压加工工艺能耗及碳排放研究[J].金属功能材料,2014,21(3):30-33. WANG Anzhe, CHEN Zhongjia, ZHANG Zhe,et al. Research of the Energy Consumption and Carbon Emissisons for Copper Tube Extursion Process[J].Metallic Functional Materials, 2014(3):30-33.
[13] 石建业.感应炉加热铸锭在铝及铝合金热挤压种的节能分析[J].有色金属加工,2011,40(5):57-59. SHI Jianye. Analysis on Saving in Energy for Induction Heating Billet in Induction Heating Furnace[J].Nonferrous Metals Processing, 2011, 40(5):57-59.
[14] 谢建新,刘静安. 金属挤压理论与技术[M].北京:冶金工业出版社,2012. XIE Jianxin, LIU Jing'an. Theory and Technology of Metals Extrusion[M].Beijing:Metallurgical Industry Press, 2012.
文章导航

/

〈 〉