机械基础工程

冷水机组机架减振效果分析

  • 么宇辉 ,
  • 丁亮 ,
  • 王箫剑 ,
  • 李志深 ,
  • 李鸿光
展开
  • 1. 上海交通大学机械系统与振动国家重点实验室, 上海, 200240;
    2. 中国船舶重工集团公司第704 研究所, 上海, 200031
么宇辉,男,1992年生,博士研究生。研究方向为转子动力学、振动控制。E-mail:yuhuiyao@sjtu.edu.cn。

收稿日期: 2018-05-30

  网络出版日期: 2020-07-20

基金资助

国家自然科学基金资助项目(11427801)

Analysis of Vibration Suppression Effectiveness on Frames of Water-cooled Chillers

  • YAO Yuhui ,
  • DING Liang ,
  • WANG Xiaojian ,
  • LI Zhishen ,
  • LI Hongguang
Expand
  • 1. State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai, 200240;
    2. Shanghai Marine Equipment Institute, Shanghai, 200031

Received date: 2018-05-30

  Online published: 2020-07-20

摘要

根据冷水机组结构特性设计了一种减振机架,并利用ANSYS对其固有频率和模态进行了计算;提出了一种利用频响函数法对冷水机组机架的减振效果进行评估的方法,通过ANSYS仿真得到了其频响函数,最后通过实验验证了该方法的可行性。结果表明,该机架具有明显的减振效果,频响函数法可以有效地评估机组或部件的减振效果。

本文引用格式

么宇辉 , 丁亮 , 王箫剑 , 李志深 , 李鸿光 . 冷水机组机架减振效果分析[J]. 中国机械工程, 2019 , 30(16) : 1891 -1895 . DOI: 10.3969/j.issn.1004-132X.2019.16.001

Abstract

A vibration suspend frame was designed according to the structural characteristics of the chiller,and the natural frequencies and modes were calculated by ANSYS software.An evaluation method for vibration suppression effectiveness on the chiller frames was presented using FRF.The FRF was obtained through simulation method by ANSYS software,and the feasibility of the method was verified by experiments.The results show that the designed frame has an obvious vibration suppression effectiveness,and the FRF method may effectively evaluate the vibration suppression effectiveness of the units or components.

参考文献

[1] 柳蕾.船用冷水机组结构和特点[J].低温与特气,2007(1):28-30. LIU Lei.Structure and Advantage of Marine Cooling-water Unit[J].Low Temperature and Specialty Gases,2007(1):28-30.
[2] 张景卫,陈华,梁杰荣,等.船用水冷冷水机组的抗振设计[J].制冷与空调,2014,14(8):42-45. ZHANG Jingwei,CHEN Hua,LIANG Jierong,et al.Anti-vibration Design of Marine Water-cooled Chiller[J].Refrigeration and Air-conditioning,2014,14(8):42-45.
[3] 桂伟兵,李海生,武涛,等.涡旋压缩机振动测试的试验研究[J].流体机械,2016,44(11):1-5. GUI Weibing,LI Haisheng,WU Tao,et al.Experimental Study on the Vibration Testing of Scroll Compressor[J].Fluid Machinery,2016,44(11):1-5.
[4] 李锋,杜强.基于频响函数的转盘振动响应预测[J].噪声与振动控制,2015,35(3):121-123. LI Feng,DU Qiang.Prediction of Turntable Vibration Based on the Frequency Response Functions[J].Noise and Vibration Control,2015,35(3):121-123.
[5] 郭铁能,李玲,蔡力钢,等.基于频响函数辨识机械结合部动态参数的研究[J].振动与冲击,2011,30(5):69-72. GUO Tieneng,LI Ling,CAI Ligang,et al.Identifying Mechanical Joint Dynamic Parameters Based on Measured Frequency Response Functions[J].Journal of Vibration and Shock,2011,30(5):69-72.
[6] MEHRPOUYA M,GRAHAM E,PARK S S.FRF Based Joint Dynamics Modeling and Identification[J].Mechanical Systems and Signal Processing,2013,39(1/2):265-279.
[7] 朱坚民,何丹丹.基于频响函数分析的主轴-刀柄-刀具结合面轴向分布参数辨识[J].中国机械工程,2017,28(16):1891-1898. ZHU Jianmin,HE Dandan.Identification of Axial Distribution Joint Parameters of Interfaces among Spindle-holder-tool Based on Frequency Response Function Analysis[J].China Mechanical Engineering,2017,28(16):1891-1898.
[8] 杨彦芳,宋玉普,纪卫红.基于实测频响函数主成分的在役网架损伤识别方法[J].振动与冲击,2007(9):128-132. YANG Yanfang,SONG Yupu,JI Weihong.An Identification Method of Existing Truss Structural Damage Based on Principal Component Analysis Measured Frequency Response Functions[J].Journal of Vibration and Shock,2007(9):128-132.
[9] 朱坚民,王健,张统超,等.一种改进的基于响应耦合子结构法的刀尖点频响函数预测方法[J].中国机械工程,2015,26(3):285-292. ZHU Jianmin,WANG Jian,ZHANG Tongchao,et al.An Improved Tool Point Frequency Response Function Prediction Method Based on RCSA[J].China Mechanical Engineering,2015,26(3):285-292.
[10] YANG Y,ZHANG W H,MA Y C,et al.Generalized Method for the Analysis of Bending,Torsional and Axial Receptances of Tool-holder-spindle Assembly[J].International Journal of Machine Tools and Manufacture,2015,99:48-67.
文章导航

/

〈 〉