机械基础工程

机械弹性车轮静动态特性研究

  • 赵又群 ,
  • 白毅强 ,
  • 叶超 ,
  • 邓耀骥 ,
  • 徐瀚 ,
  • 王秋伟
展开
  • 南京航空航天大学能源与动力学院, 南京, 210016
赵又群,男,1968年生,教授、博士研究生导师。研究方向为车辆动态仿真与控制、车辆结构力学与NVH、车辆底盘控制与人机共驾、新型动力与电动车辆、防爆(电动)车轮与柔性负重轮等。获国防技术发明二等奖1项。发表论文200余篇。E-mail:yqzhao@nuaa.edu.cn。

收稿日期: 2018-03-23

  网络出版日期: 2020-07-18

基金资助

国家自然科学基金资助项目(11672127);总装备部探索研究重大项目(NHA13002);南京航空航天大学研究生创新基地(实验室)开放基金资助项目(KFJJ20170223);中央高校基本科研业务费专项资金资助项目(NP2016412,NP2018403)

Study on Static and Dynamic Characteristics of Mechanical Elastic Wheels

  • ZHAO Youqun ,
  • BAI Yiqiang ,
  • YE Chao ,
  • DENG Yaoji ,
  • XU Han ,
  • WANG Qiuwei
Expand
  • College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016

Received date: 2018-03-23

  Online published: 2020-07-18

摘要

为了揭示机械弹性车轮的性能特点,基于力学理论和虚拟样机技术对机械弹性车轮的静动态特性进行了研究。在静态工况下,对比分析机械弹性车轮完好状态下和有一根铰链组受损状态下的静力承载特性,结果表明,受损状态下承受最大拉力的铰链组与完好状态时有较大不同,不再位于輮轮顶部,且最大拉力值提高很多。在动态工况下,建立机械弹性车轮的驱动轮、从动轮和制动轮的力学模型,分析轮毂、铰链组和輮轮之间的力传递特性。最后在ADAMS中建立装配机械弹性车轮的整车模型并进行仿真研究,结果验证了机械弹性车轮的转动滞后角与输入转矩、车速和地面切向力之间的内在联系。

本文引用格式

赵又群 , 白毅强 , 叶超 , 邓耀骥 , 徐瀚 , 王秋伟 . 机械弹性车轮静动态特性研究[J]. 中国机械工程, 2019 , 30(19) : 2306 -2312 . DOI: 10.3969/j.issn.1004-132X.2019.19.006

Abstract

In order to reveal the performance characteristics of mechanical elastic wheels, the static and dynamic characteristics of mechanical elastic wheels were studied based on mechanics theory and virtual prototype technology. The static loading characteristics of mechanical elastic wheels were analyzed comparatively under good conditions and with a hinged group damaged conditions. The results show that the maximum tensions of hinged group under damaged condition are quite different from those under intact condition. They are no longer located at the top of the wrestle wheel, and the maximum tension value is much higher than that under intact condition. The mechanics model of the driving wheel, driven wheel and brake wheel were established under dynamic conditions. Also, the wheel hub, hinged group and elastic wheel disk force transmissions were analyzed. Finally, the vehicle model with the elastic wheels was established in ADAMS and the simulation study was carried out. The results verify the natural relation among the rotational hysteresis angles of the mechanical elastic wheels and input torques, speeds and ground tangential forces.

参考文献

[1] GASMI A,JOSEPH P F. Development of a Two-dimensional Model of a Compliant Non-pneumatic Tire[J]. International Journal of Solids and Structures,2012,49(13):1723-1740.
[2] 佟金,杨欣,张伏,等. 零压续跑轮胎技术现状与发展[J]. 农业机械学报,2007,38(3):182-187. TONG Jin,YANG Xin,ZHANG Fu,et al. Development of Run-flat Tire Technology[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(3):182-187.
[3] LUGNER P,PACEJKA H,PLOCHL M. Recent Advances in Tyre Models and Testing Procedures[J]. Vehicle System Dynamics,2005,43(6/7):413-436.
[4] JANGA I G,SUNGB Y H,YOOC E J,et al. Pattern Design of a Non-pneumatic Tire for Stiffness Using Topology Optimization[J]. Engineering Optimization,2012,44(2):119-131.
[5] BRAS B,COBERT A. Life-cycle Environmental Impact of Michelin TWEEL Tire for Passenger Vehicles[J]. SAE International Journal of Passenger Cars-Mechanical Systems,2011,4(1):32-43.
[6] 李杰,庄继德,魏东. 沙漠仿生轮胎的静态特性和动态特性研究[J]. 农业机械学报,2007,38(9):30-33. LI Jie,ZHUANG Jide,WEI Dong. Static and Dynamic Performancesof Bionic Camel Foot Tire[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(9):30-33.
[7] SUGIYAMA H,SUDA Y. Non-linear Elastic Ring Tyre Model Using the Absolute Nodal Coordinate Formulation[J]. Journal of Multi-body Dynamics,2009,223(3):211-219.
[8] NARASIMHAN A,ZIEGERT J,THOMPSON L. Effects of Material Properties on Static Load-deflection and Vibration of a Non-pneumatic Tire during High-speed Rolling[J]. SAE International Journal of Passenger Cars-Mechanical Systems,2011,4(1):59-72.
[9] ZHAO Y Q,ZANG L G,CHEN Y Q,et al. Non-pneumatic Mechanical Elastic Wheel Natural Dynamic Characteristics and Influencing Factors[J]. Journal of Central South University,2015,22(5):1707-1715.
[10] 管欣,王鹏,詹军,等. 金属弹性车轮的建模与动态仿真研究[J]. 中国机械工程,2007,18(21):2637-2641. GUAN Xin,WANG Peng,ZHAN Jun,et al. Modeling and Dynamic Analysis of a Metal Elastic Wheel[J]. China Mechanical Engineering,2007,18(21):2637-2641.
[11] WEI Wang,ZHAO Youqun,ZANG Liguo. Structure Analysis and Ride Comfort of Vehicle on New Mechanical Elastic Tire[C]//Proceedings of the FISITA 2012 World Automotive Congress,Lecture Notes in Electrical Engineering. Beijing,2013:199-209.
[12] LI Bo,ZHAO Youqun,ZANG Liguo. Closed-form Solution of Curved Beam Model of Elastic Mechanical Wheel[J]. Journal of Vibroengineering,2014,16(8):3951-3962.
[13] WANG Wei, YAN Shan, ZHAO Shugao. Experimental Verification and Finite Element Modeling of Radial Truck Tire under Static Loading[J]. Journal of Reinforced Plastics and Composites,2013,32(7):490-498.
[14] 岳红旭,赵又群. 一种新型安全车轮的非线性有限元分析[J]. 中国机械工程,2012,23(11):1380-1385. YUE Hongxu,ZHAO Youqun. Nonlinear Finite Element Analysis of a New Safety Wheel[J]. China Mechanical Engineering,2012,23(11):1380-1385.
[15] 汪伟,赵又群,姜成,等. 新型机械弹性车轮的力学传递特性分析[J]. 江苏大学学报(自然科学版),2013,34(3):261-266. WANG Wei,ZHAO Youqun,JIANG Cheng,et al. Characteristics Analysis of Mechanical Transmission for a New Mechanical Elastic Wheel[J]. Journal of Jiangsu University(Natural Science Edition),2013,34(3):261-266.
文章导航

/

〈 〉